Diploma in Design and Testing of Piles and Diaphragm Walls
Online postgraduate diploma of 800 hours in pile and diaphragm wall design and testing, structured in 8 modules covering deep foundations, pile bearing capacity, settlements and lateral loads, structural design, execution and control, load testing and integrity testing under EN 1997-1, EN 1536 and EN 1538, with an assigned technical tutor.
Diploma in Design and Testing of Piles and Diaphragm Walls — studying from Singapore
Singapore is widely studied for its urban planning and infrastructure delivery, with ongoing investment in the Mass Rapid Transit network, the Thomson-East Coast Line, and large-scale water and coastal protection projects. The Land Transport Authority, the Housing and Development Board and the Public Utilities Board shape much of the work. Smart city initiatives such as Smart Nation are central to the sector. Typical employers include government agencies, major contractors and consultancies such as Surbana Jurong and Arup in the region.
Fees for Singapore: S$1,840 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How are civil and rail engineers registered in Singapore, and does SEIUM's qualification count?
In Singapore, civil and structural engineers can register as Professional Engineers with the Professional Engineers Board (PEB) under the Professional Engineers Act, and the Building and Construction Authority (BCA) regulates the built environment. Rail is overseen by the Land Transport Authority (LTA). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is for employers or the relevant body to decide.
Which Singapore employers hire civil, rail and smart city engineers?
Key employers include the LTA, Public Utilities Board, JTC, the Housing and Development Board, consultancies, and contractors working on MRT and urban projects. Singapore's smart nation agenda also creates demand for smart city specialists. Employers usually prioritise registered qualifications and project experience. Your SEIUM final project may support your case, but it is not a guaranteed route into these roles.
Is the course realistic while working, and what language support is available?
Everything is taught online in English, and you are assigned a technical tutor for support. The programmes are demanding, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course, so plan your time well. Fees are payable in instalments, and employer sponsorship is possible, depending on your company.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select the appropriate type of deep foundation.
Calculate pile bearing capacity using different methods.
Estimate settlements and response to lateral loads.
Carry out the structural design of piles, pile caps and diaphragm walls.
Control the execution of piles and diaphragm walls.
Interpret static and dynamic load tests.
Assess the integrity of constructed elements.
Who it's for
- Foundation geotechnical engineers.
- Special foundations designers.
- Pile testing technicians.
- Piling site managers.
- Quality control engineers.
- Geotechnical consultants.
- Engineering or science graduates looking to move into special foundations.
What you'll work with
- EN 1997-1 (Eurocode 7 — geotechnical design)
- EN 1536 (execution of special geotechnical works — bored piles)
- EN 1538 (execution of special geotechnical works — diaphragm walls)
- EN 12699 (execution of special geotechnical works — displacement piles)
- ISO 22477-1 (testing of geotechnical structures — static compression load testing of piles)
- ASTM D4945 (high-strain dynamic testing of deep foundations)
- ASTM D5882 (low-strain impact integrity testing of deep foundations)
- ASTM D6760 (integrity testing of concrete deep foundations by ultrasonic crosshole testing)
- PLAXIS 3D
- GEO5
- Ensoft LPILE
- CAPWAP
- Midas GTS NX
8 modules
1.1Criteria for choosing a deep foundation1.2Classification of pile types1.3Driven piles and bored piles1.4Displacement piles1.5Micropiles and their applications1.6Diaphragm walls as load-bearing foundations1.7Load transfer mechanisms1.8Negative skin friction on piles1.9Geotechnical investigation for piles1.10Workshop: choosing the pile type
2.1End-bearing resistance2.2Shaft resistance2.3SPT- and CPT-based methods2.4Analytical static methods2.5Dynamic driving formulae2.6Eurocode 7 partial factors2.7Pile groups2.8Group efficiency2.9Rock-socketed piles2.10Practical exercise: pile capacity from CPT
3.1Settlement of a single pile3.2Settlement of pile groups3.3t-z and q-z load transfer curves3.4Horizontal loads and p-y curves3.5Broms method for lateral loads3.6Piles under seismic loading3.7Pile-raft interaction3.8Piles in liquefiable ground3.9Effect of nearby excavations3.10Lab: p-y analysis of a pile
4.1Pile reinforcement4.2Buckling of slender piles4.3Pile cap design4.4Diaphragm walls in bending4.5Reinforcement of diaphragm wall panels4.6Joints between panels4.7Durability of buried concrete4.8Tremie concreting4.9Reinforcement detailing4.10Case study: reinforcement of a diaphragm wall panel
5.1Drilling with bentonite slurry5.2Drilling with temporary casing5.3Continuous flight auger (CFA) piles5.4Impact and vibratory driving5.5Pile concreting5.6Execution control5.7Typical execution defects5.8Execution tolerances5.9Execution logs and records5.10Practical exercise: analysis of CFA pile records
6.1Static load test6.2Bi-directional load test6.3High-strain dynamic test6.4Signal analysis with CAPWAP6.5Statnamic rapid load test6.6Lateral load tests6.7Fibre optic instrumentation6.8Interpreting load-settlement curves6.9Testing according to the ISO 22477 series6.10Lab: interpretation of a static load test
7.1Low-strain sonic integrity test7.2Cross-hole sonic logging7.3Thermal integrity profiling7.4Integrity of diaphragm wall panels7.5Coring and borehole camera inspection7.6Classification of anomalies7.7Repair of detected defects7.8Acceptance criteria7.9Integrity test reports7.10Case study: diagnosis of a sonic anomaly
8.1Description of the structure8.2Geotechnical model of the site8.3Selecting the solution8.4Bearing capacity calculation8.5Settlement estimation8.6Structural design of elements8.7Load testing plan8.8Foundation budget8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is PLAXIS 3D, GEO5, Ensoft LPILE, CAPWAP and Midas GTS NX, in free, academic or evaluation versions. Practical work is based on real procedures: static and dynamic pile load tests, sonic and cross-hole integrity tests and analysis of pile execution records. Assessment is continuous by module, plus the final project.
Standards covered: EN 1997-1, EN 1536, EN 1538, EN 12699, ISO 22477-1, ASTM D4945, ASTM D5882, ASTM D6760
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with PLAXIS 3D, GEO5, Ensoft LPILE, CAPWAP and Midas GTS NX, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Ventilation, Safety and Emergencies in Tunnels
Online postgraduate diploma of 800 hours in tunnel ventilation, safety and emergencies, structured in 8 modules covering tunnel safety regulation under Directive 2004/54/EC, normal ventilation, tunnel…
Diploma in Vibration Mitigation and Damping Devices
Online postgraduate diploma of 800 hours in vibration mitigation and damping devices. 8 modules covering vibration sources, experimental dynamic characterisation, tuned mass dampers, viscous and viscoelastic…
Postgraduate Diploma in Railway EMC and Compatibility
Online 800-hour Postgraduate Diploma in Railway EMC and Compatibility. 8 modules covering the EN 50121 series (railway electromagnetic compatibility), EN 50238-1 (compatibility between rolling stock and…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships