Diploma in Avionics and Weapon Systems Integration
Online postgraduate diploma of 800 hours in avionics and weapon systems integration. 8 modules covering avionics architectures, buses and networks, stores management systems, safety-critical avionics software, hardware and environments, integration and testing, and safety, certification and ethics, applied to DO-178C, ARINC 653 and MIL-STD-1553B, with an assigned technical tutor.
Diploma in Avionics and Weapon Systems Integration — studying from Singapore
Singapore maintains a comprehensive defence sector through the Ministry of Defence and the Defence Science and Technology Agency, which develops military technologies and manages procurement. Engineering work covers land systems, ammunition, command and control, and simulation. Industry partners include ST Engineering, which supplies defence and security systems globally. Engineers here work within strict security and export control frameworks, often combining systems integration with reliability and safety engineering.
Fees for Singapore: S$1,840 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How does defence engineering work in Singapore, and which bodies oversee it?
Singapore's defence engineering is largely centred on the Ministry of Defence (MINDEF) and DSTA, the defence procurement and development agency, along with the Singapore Armed Forces. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition for defence roles depends on the employer or relevant authority.
Who employs defence and land systems engineers in Singapore?
Main employers include MINDEF, DSTA, the SAF, and defence industry companies including ST Engineering. Access to many roles requires security clearance and citizenship or residency rules, so check eligibility early. Employers focus on proven competence and clearance status. Your final project can illustrate technical capability, but it does not replace these requirements.
Is the course manageable alongside a job, and can employers fund it?
The programme is fully online and taught in English, with an assigned technical tutor. Plan for a heavy workload: 1,900 hours for a master's, 800 for a postgraduate diploma, or 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, which is common in defence-linked organisations, though approval is up to them.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand modern avionics architectures.
Analyse avionics buses and networks.
Understand the role of stores management systems.
Develop safety-critical software in line with DO-178C.
Qualify hardware for aeronautical environments.
Plan avionics integration and testing.
Apply safety, certification and ethics processes.
Who it's for
- Avionics engineers.
- Safety-critical software engineers.
- Systems integration engineers.
- Certification engineers.
- Embedded hardware engineers.
- Avionics test engineers.
- Engineering or science graduates looking to move into aeronautics.
What you'll work with
- DO-178C (software in airborne systems)
- ARINC 653 (partitioning in modular avionics)
- MIL-STD-1553B (multiplexed data bus)
- MIL-STD-1760E (aircraft-store electrical interface)
- DO-254 (airborne electronic hardware)
- DO-160G (environmental conditions for equipment)
- ARP4754A (development of aircraft systems)
- Ansys SCADE
- MATLAB Simulink
- LDRA Testbed
- Wind River VxWorks 653
- IBM DOORS
8 modules
1.1Evolution of avionics1.2Federated avionics1.3Integrated modular avionics (IMA)1.4ARINC 653 and partitioning1.5Mission computers1.6Displays and glass cockpit1.7Mission sensors1.8Avionics networks1.9OMS and FACE open architectures1.10Case study: comparison between architectures
2.1MIL-STD-1553B2.2ARINC 4292.3AFDX ARINC 6642.4Fibre Channel in avionics2.5TTEthernet2.6Determinism and latency2.7Network analysis2.8Monitoring tools2.9Network cybersecurity2.10Lab: ARINC 429 traffic analysis
3.1Functions of the SMS3.2MIL-STD-1760 interface3.3Stores inventory3.4Safety discretes3.5Interlocks3.6Integration with the mission computer3.7Cockpit interface3.8SMS testing3.9Configuration management3.10Practical exercise: state diagram of an SMS
4.1DO-178C and DAL levels4.2DO-330 tool qualification4.3DO-331 model-based development4.4DO-332 object-oriented technology4.5DO-333 formal methods4.6Software planning4.7Verification and coverage4.8Configuration management4.9SOI audits4.10Lab: code generation with SCADE
5.1DO-254 complex hardware5.2FPGAs in avionics5.3DO-160G environmental conditions5.4MIL-STD-810H5.5MIL-STD-461G and EMC5.6Lightning and HIRF effects5.7Thermal management of electronics5.8Component reliability5.9Obsolescence5.10Practical exercise: environmental test plan for a computer
6.1Avionics integration benches6.2Systems rig6.3Environment simulation6.4Ground integration testing6.5Avionics flight testing6.6Defect management6.7Requirements traceability6.8Regression and automation6.9Qualification6.10Case study: bench integration plan
7.1ARP4754A and ARP47617.2System safety analysis7.3EMAR 21 military certification7.4DO-326A cybersecurity7.5Legal review of new capabilities7.6Professional responsibility7.7Export control7.8Human factors in the cockpit7.9Lessons from incidents7.10Case study: safety analysis of a function
8.1System definition8.2Avionics architecture8.3Bus selection8.4Stores management8.5Software and hardware plan8.6Integration plan8.7Safety analysis8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys SCADE, MATLAB Simulink, LDRA Testbed, Wind River VxWorks 653 and IBM DOORS, in free, academic or evaluation versions. Real procedures are studied, including traffic analysis on avionics buses, integration bench testing and environmental testing of equipment. Assessment is continuous by module, plus the final capstone project.
Standards covered: DO-178C, ARINC 653, MIL-STD-1553B, MIL-STD-1760E, DO-254, DO-160G, ARP4754A.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys SCADE, MATLAB Simulink, LDRA Testbed, Wind River VxWorks 653, IBM DOORS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Experimental Fuel Testing
Online postgraduate diploma of 800 hours in experimental fuel testing. 8 modules covering test reactor programmes, fabrication and characterisation, in-reactor instrumentation, RIA and LOCA testing, out-of-pile…
Diploma in Ethics in Critical PNT Applications
Online postgraduate diploma of 800 hours in ethics in critical PNT applications. 8 modules covering societal dependence on PNT, ethics of critical infrastructure, privacy and location,…
Diploma in Ultra-Lightweight Ballistic Ceramics and Materials
Online postgraduate diploma of 800 hours in ultra-lightweight ballistic ceramics and materials, structured in 8 modules covering technical protection ceramics, ceramic processing, microstructure and properties (ASTM…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships