Diploma in Approval and Integration of Exterior Lighting
Online postgraduate diploma of 800 hours in exterior lighting homologation and integration: 8 modules covering the vehicle type-approval framework, the simplified lighting regulations, installation under UNECE R48, body integration, electronics and systems, photometric and environmental testing and homologation programme management, with an assigned technical tutor.
Diploma in Approval and Integration of Exterior Lighting — studying from Singapore
Singapore's product design sector serves consumer electronics, medical devices, industrial equipment and digital services, with strong demand for user experience and interface design. The Singapore University of Technology and Design runs design-focused programmes, and the Design Singapore Council promotes design capability across industries. Engineers working in human-machine interface design combine usability research with embedded and software development. Employers include multinational product companies, technology start-ups and design consultancies.
Fees for Singapore: S$2,560 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Is product or HMI design a regulated profession in Singapore, and is SEIUM recognised?
Product and HMI design is not a licensed profession in Singapore, so there is no statutory registration. Relevant bodies include the Singapore Institute of Architects for some design work and the Design Singapore Council for industry promotion. SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition is decided by employers.
Which Singapore employers hire HMI and product design engineers?
Opportunities exist with electronics and medical device firms, consumer product companies, software houses, and automotive and industrial suppliers. Singapore's manufacturing and healthtech sectors are notable employers. Hiring managers usually look closely at design portfolios and user research work. Your final project can strengthen your portfolio, though employers judge it on their own terms.
Can I study this alongside work from Singapore, and what are the payment options?
Yes, all programmes are online and taught in English, so you can study from Singapore without a student visa and fit lessons around work. The workload is significant, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course. Fees can be paid in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the European and international vehicle type-approval system.
Interpret the requirements of UNECE R148, R149 and R150 for each function.
Verify the installation of devices under UNECE R48.
Resolve the integration of lamp clusters into the body with sealing and tolerance criteria.
Define electrical, diagnostic and electromagnetic compatibility requirements.
Plan photometric and environmental tests in ISO/IEC 17025 laboratories.
Manage a multi-market homologation programme.
Who it's for
- Homologation engineers responsible for lighting approvals.
- Lighting integration engineers working on headlamps and rear lamps in the body.
- Technical regulations specialists following UNECE, EU and FMVSS rules.
- Photometric test engineers who plan and interpret laboratory tests.
- Conformity of production managers in vehicle and supplier plants.
- Electrical systems engineers dealing with lighting control and diagnostics.
- Engineering or science graduates seeking to enter the automotive industry.
What you'll work with
- UNECE R48 (installation of lighting and light-signalling devices)
- UNECE R149 (road illumination devices)
- UNECE R148 (light-signalling devices)
- Regulation (EU) 2018/858 (approval and market surveillance of motor vehicles)
- UNECE R150 (retro-reflective devices and markings)
- FMVSS 108 (US lamps, reflective devices and associated equipment)
- UNECE R10 (electromagnetic compatibility)
- ISO/IEC 17025 (competence of testing and calibration laboratories)
- CATIA V5
- Synopsys LucidShape
- Ansys Speos
- Vector CANoe
- Siemens Teamcenter
8 modules
1.1Type approval in the European Union1.2Regulation (EU) 2018/858 and procedure1.3The 1958 Geneva Agreement and WP.291.4Technical services and approval authorities1.5Component approval versus installation approval1.6E-marking and approval numbers1.7Conformity of production1.8FMVSS markets and self-certification1.9The Chinese market and GB standards1.10Case study: type-approval file for a rear lamp
2.1Consolidated regulations UNECE R148, R149 and R1502.2Signalling functions and their classes2.3Road illumination functions2.4Retro-reflectors and retro-reflective materials2.5Replaceable and non-replaceable light sources2.6Colour requirements and chromaticity coordinates2.7Minimum and maximum intensities2.8Activation requirements and tell-tales2.9Transitions and transitional provisions2.10Practical exercise: requirements matrix for a rear lamp cluster
3.1Mandatory and optional devices3.2Mounting position, height and width3.3Geometric visibility angles3.4Electrical connections and simultaneous activation3.5Beam aim correction3.6Daytime running lamps3.7Emergency stop signal3.8Manoeuvring and cornering lamps3.9Installation on category N and O vehicles3.10Case study: checking angles in CAD
4.1Headlamp and rear lamp architecture in the vehicle4.2Interfaces with the bumper, bonnet and tailgate4.3Gaps and flush of lamp clusters4.4Sealing and ventilation of headlamps4.5Condensation and humidity management4.6Integration of sensors and cameras4.7Pedestrian requirements and impact absorption4.8Accessibility for maintenance and repair4.9Tolerances and dimensional stack-up4.10Workshop: integration analysis of a headlamp in the front end
5.1Lighting electrical architecture5.2Control units and CAN and LIN communication5.3Diagnostics and fault detection5.4Automatic headlamp levelling5.5Electromagnetic compatibility under UNECE R105.6Electrical environmental requirements ISO 167505.7Functional safety ISO 26262 in lighting5.8Software and feature updates5.9Management of market variants5.10Practical exercise: fault tree of a lighting system
6.1Goniophotometry and test points6.2Colour measurement and chromaticity coordinates6.3Photometric stability tests6.4Vibration and thermal shock tests6.5Dust, water and corrosion tests6.6Weathering resistance of lenses6.7LED durability tests6.8ISO/IEC 17025 testing laboratories6.9Test reports and certificates6.10Lab: interpreting a goniophotometric report
7.1Planning homologations during development7.2Family and extension strategy7.3Technical documentation and information documents7.4Relationship with the technical service7.5Conformity of production and audits7.6Engineering changes and their impact7.7Recalls and non-conformities in the market7.8Regulatory monitoring and GRE proposals7.9Multi-market management7.10Case study: homologation schedule for a new model
8.1Definition of the vehicle and markets8.2Inventory of lighting functions8.3Matrix of applicable requirements8.4Installation and visibility analysis8.5Test and laboratory plan8.6Documentation file8.7Programme risk analysis8.8Conformity of production plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme is compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is CATIA V5, Synopsys LucidShape, Ansys Speos, Vector CANoe and Siemens Teamcenter, in free, academic or evaluation versions. Cases are studied on real procedures for installation verification on a digital mock-up, goniophotometric testing in an ISO/IEC 17025 laboratory and environmental testing of lamp clusters. Assessment is continuous by module, plus the final capstone project.
Standards covered: UNECE R48, UNECE R149, UNECE R148, Regulation (EU) 2018/858, UNECE R150, FMVSS 108, UNECE R10, ISO/IEC 17025.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with CATIA V5, Synopsys LucidShape, Ansys Speos, Vector CANoe and Siemens Teamcenter, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Branding Language for 2R and Pilot Ergonomics
Online postgraduate diploma of 800 hours in brand language for two-wheelers and rider ergonomics: 8 modules covering motorcycle brand identity, form language and proportions, rider anthropometry,…
Diploma in E-Bikes/E-Scooters: IP Rating and Vandal-Resistant
Online postgraduate diploma of 800 hours in e-bikes and e-scooters, IP rating and anti-vandal design: 8 modules covering light electric vehicles, IP protection ratings, sealing design,…
Diploma in Style↔Aero Integration and Design Trade-offs
Online postgraduate diploma of 800 hours in styling↔aero integration and design trade-offs, structured in 8 modules covering design and aerodynamics in the programme, trade-off analysis, rapid…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships