Diploma in Aerothermodynamics of Combat Engines
Online postgraduate diploma of 800 hours in aerothermodynamics of combat engines. 8 modules covering military turbofan thermodynamics, supersonic intakes, fan and compressor aerodynamics, combustors and afterburners, high-temperature turbines, nozzles and integrated performance, and engine testing and certification (JSSG-2007B, MIL-HDBK-1783B, EMAR 21), with an assigned technical tutor.
Diploma in Aerothermodynamics of Combat Engines — studying from Singapore
Singapore maintains a comprehensive defence sector through the Ministry of Defence and the Defence Science and Technology Agency, which develops military technologies and manages procurement. Engineering work covers land systems, ammunition, command and control, and simulation. Industry partners include ST Engineering, which supplies defence and security systems globally. Engineers here work within strict security and export control frameworks, often combining systems integration with reliability and safety engineering.
Fees for Singapore: S$1,280 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How does defence engineering work in Singapore, and which bodies oversee it?
Singapore's defence engineering is largely centred on the Ministry of Defence (MINDEF) and DSTA, the defence procurement and development agency, along with the Singapore Armed Forces. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition for defence roles depends on the employer or relevant authority.
Who employs defence and land systems engineers in Singapore?
Main employers include MINDEF, DSTA, the SAF, and defence industry companies including ST Engineering. Access to many roles requires security clearance and citizenship or residency rules, so check eligibility early. Employers focus on proven competence and clearance status. Your final project can illustrate technical capability, but it does not replace these requirements.
Is the course manageable alongside a job, and can employers fund it?
The programme is fully online and taught in English, with an assigned technical tutor. Plan for a heavy workload: 1,900 hours for a master's, 800 for a postgraduate diploma, or 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, which is common in defence-linked organisations, though approval is up to them.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the thermodynamic cycle of low-bypass afterburning turbofans.
Design supersonic air intakes compatible with the engine.
Interpret compressor maps and stability margins.
Understand how combustors, afterburners and variable nozzles work.
Assess cooling solutions and materials for high-temperature turbines.
Simulate on- and off-design performance with professional tools.
Know the testing and certification requirements for military engines.
Who it's for
- Aircraft propulsion engineers working on combat engine programmes.
- Turbomachinery aerodynamics specialists designing fans, compressors and turbines.
- Engine performance engineers running cycle and off-design simulations.
- Engine test engineers in sea-level and altitude test facilities.
- Turbomachinery CFD analysts.
- Engine–aircraft integration engineers dealing with intakes, nozzles and installation effects.
- Engineering or science graduates seeking to enter the aerospace industry.
What you'll work with
- JSSG-2007B (US joint service specification guide for aircraft turbine engines)
- MIL-HDBK-1783B (Engine Structural Integrity Program, ENSIP)
- EMAR 21 (European military airworthiness certification requirements)
- SAE ARP755 (gas turbine engine performance station identification and nomenclature)
- SAE ARP1420 (gas turbine engine inlet flow distortion guidelines)
- SAE AIR1419 (inlet total-pressure distortion considerations)
- SAE AS681 (gas turbine engine steady-state and transient performance presentation)
- GasTurb
- NPSS
- ANSYS CFX
- Simcenter STAR-CCM+
- MATLAB
8 modules
1.1Ideal and real Brayton cycle1.2Thermal, propulsive and overall efficiency1.3Low-bypass turbofan1.4Specific thrust and specific fuel consumption1.5Afterburning cycle1.6Pressure ratio and turbine entry temperature1.7SAE ARP755 station nomenclature1.8ISA atmosphere and altitude effects1.9Design-point analysis1.10Practical exercise: cycle calculation for a mixed-flow turbofan
2.1Normal and oblique shock waves2.2Pitot, ramp and cone intakes2.3Total pressure recovery2.4Flow distortion and DC60 indices2.5Intake–engine compatibility2.6S-ducts and fan shielding2.7Boundary layer and diverters2.8Wind tunnel testing of intakes2.9Distortion under SAE ARP14202.10Case study: preliminary design of a ramp intake
3.1Velocity triangles and the Euler equation3.2Transonic fan and blade shocks3.3Multistage axial compressor3.4Compressor maps and operating line3.5Rotating stall and surge3.6Stability margin3.7Variable stator vanes3.8Bleeds and power extraction3.9CFD of blade cascades3.10Lab: interpretation of a fan map
4.1Annular combustors and flame stabilisation4.2Fuel atomisation and injection4.3NOx and soot formation4.4Outlet temperature pattern factor4.5Afterburner flameholders and spray rings4.6Thermoacoustic instabilities4.7Variable convergent–divergent nozzles4.8Ignition and altitude relight4.9JP-8 and F-34 fuels4.10Workshop: energy balance of an afterburner
5.1High- and low-pressure turbines5.2Film cooling and internal convection5.3Thermal barrier coatings5.4Single-crystal superalloys5.5Profile and secondary losses5.6Tip clearance and active control5.7Unsteady rotor–stator interaction5.8Creep life and thermomechanical fatigue5.9Conjugate CFD of cooled blades5.10Practical exercise: estimating cooling effectiveness
6.1Axisymmetric and two-dimensional nozzles6.2Thrust vectoring6.3Jet–airframe interaction6.4Infrared signature of the jet and its attenuation6.5Off-design performance6.6Simulation with GasTurb and NPSS6.7Acceleration and deceleration transients6.8FADEC control and control laws6.9Component matching6.10Case study: performance across the flight envelope
7.1Sea-level test cells7.2Altitude test facility testing7.3Pressure and temperature instrumentation7.4Bird, ice and foreign object ingestion7.5JSSG-2007 guide requirements7.6Structural integrity under MIL-HDBK-17837.7Military type certification EMAR 217.8Accelerated durability testing7.9Uncertainty analysis in performance7.10Practical exercise: data reduction from a test cell run
8.1Mission specification and requirements8.2Selection of cycle parameters8.3Component sizing8.4Intake and nozzle study8.5Off-design performance analysis8.6Weight and fuel consumption estimate8.7Development test plan8.8Technical risk analysis8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is GasTurb, NPSS, ANSYS CFX, Simcenter STAR-CCM+ and MATLAB, in free, academic or evaluation versions. Testing is studied through real procedures for sea-level engine test cell runs, intake distortion testing in wind tunnels and altitude test facility runs. Assessment is continuous by module, plus the final project.
Standards covered: JSSG-2007B, MIL-HDBK-1783B, EMAR 21, SAE ARP755, SAE ARP1420, SAE AIR1419, SAE AS681.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with GasTurb, NPSS, ANSYS CFX, Simcenter STAR-CCM+ and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Legal Auditing of AI in Defence
Online postgraduate diploma of 800 hours in legal auditing of AI in defence, structured in 8 modules covering AI uses and risks in defence, the applicable…
Diploma in Ethics of Additive Manufacturing in Defence
Online postgraduate diploma of 800 hours in ethics of additive manufacturing in defence. 8 modules covering applied ethics, export controls on digital files, proliferation risk, technical…
Diploma in Land Mobility Infrastructure Design
Online postgraduate diploma of 800 hours in land mobility infrastructure design: 8 modules covering corridor planning, roads and pavements, bridges and crossings, geotechnics, rail and logistics…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships