Course on obsolescence in electrical systems
Online course of 300 hours in obsolescence management for electrical systems, structured in 6 modules covering obsolescence in electrical equipment, proactive management, resolution strategies, economic and technical evaluation and critical sectors, with an assigned technical tutor.
Course on obsolescence in electrical systems — studying from Singapore
Singapore's electromobility sector is growing under national plans for electric vehicles, charging infrastructure and cleaner public transport. The Energy Market Authority oversees energy transition policy, including hydrogen and energy storage, while the Land Transport Authority manages electric bus and taxi programmes. Research on battery technology and hydrogen is conducted at institutions such as the Nanyang Technological University. Employers include energy companies, charging network operators and battery and component suppliers serving the region.
Fees for Singapore: S$1,060 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
Which Singapore bodies regulate batteries, electric mobility and hydrogen, and is SEIUM recognised?
Singapore's energy and hydrogen activities are overseen by the Energy Market Authority (EMA) and the Land Transport Authority (LTA) for electric vehicles, with fire safety handled by the Singapore Civil Defence Force. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition depends on employers or the relevant body.
Which employers in Singapore hire battery and electromobility engineers?
Employers include EV-related companies, battery manufacturers and suppliers, energy utilities, charging network operators, and companies involved in Singapore's electric vehicle and hydrogen pilots. Employers usually prioritise hands-on experience with battery systems and safety standards. Your final project can show applied knowledge, but hiring remains at the employer's discretion.
Is this manageable with a full-time job, and does the language level suit non-native speakers?
Lessons are delivered fully online in English, and an assigned technical tutor guides you through the material. The workload is large, with 1,900 hours for a master's, 800 for a postgraduate diploma and 300 for a specialist course, so plan carefully. Fees are payable in instalments, and employer sponsorship is possible, subject to your company's policy.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the types and causes of obsolescence in electrical systems.
Implement a proactive obsolescence management plan.
Assess the criticality of components and equipment.
Select the right resolution strategy for each case.
Calculate the life cycle cost of the alternatives.
Manage the effects on certifications and configuration.
Plan the renewal of critical installations.
Who it's for
- Obsolescence management engineers.
- Electrical maintenance managers.
- Industrial asset managers.
- Reliability engineers.
- Electronic component buyers.
- Engineers leading the modernisation of installations.
- Engineering or science graduates looking to move into the railway sector.
What you'll work with
- IEC 62402 (obsolescence management)
- IEC 60300-3-3 (dependability management, life cycle costing)
- ISO 55001 (asset management systems)
- IEC 62435-1 (long-term storage of electronic semiconductor devices)
- IEC 60812 (failure modes and effects analysis, FMEA)
- SAE AS5553 (counterfeit electronic parts avoidance, detection and mitigation)
- IEC 61508 (functional safety of electrical/electronic/programmable safety-related systems)
- SiliconExpert
- Z2Data
- IBM Maximo
- Octopart
- Microsoft Excel
6 modules
1.1Types of obsolescence: technological, functional and regulatory1.2Life cycle of electronic components1.3Mismatch between system life and component life1.4End-of-life notices and last-time buy1.5Obsolescence in power electronics1.6Software and firmware obsolescence1.7Obsolescence of switchgear and protection devices1.8Impact on availability and safety1.9Costs associated with obsolescence1.10Case study: risk inventory of a control panel
2.1Management plan according to IEC 624022.2Bill of materials and databases2.3Monitoring the component market2.4Risk and criticality indices2.5Forecasting the obsolescence date2.6Organisation and responsibilities2.7Contractual clauses with suppliers2.8Monitoring indicators2.9Integration with asset management2.10Workshop: criticality matrix of obsolete components
3.1Last-time buy and stock calculation3.2Long-term storage of components3.3Alternative and equivalent components3.4Risk of counterfeit components3.5Harvesting components from decommissioned equipment3.6Emulated and licensed manufacturing3.7Partial or complete redesign3.8Planned technology refresh3.9Requalification and new certifications3.10Practical exercise: comparing strategies for an obsolete relay
4.1Life cycle costing according to IEC 60300-3-34.2Cost analysis of alternatives4.3Reliability of replacement components4.4Failure modes analysis after the change4.5Electromagnetic compatibility after the modification4.6Impact on certificates and type approvals4.7Equipment configuration management4.8Multi-criteria decision analysis4.9Renewal investment plan4.10Case study: business case for modernising a SCADA system
5.1Substations and electrical protection5.2Railway traction systems5.3Electronics in defence and aerospace5.4Industrial automation and PLCs5.5Charging infrastructure and its service life5.6Renewable generation installations5.7Medical and laboratory equipment5.8Building control systems5.9Safety requirements in critical systems5.10Practical exercise: protection renewal plan for a substation
6.1Selecting the electrical system to be studied6.2Component inventory and analysis6.3Obsolescence risk assessment6.4Selection of resolution strategies6.5Economic evaluation of alternatives6.6Management and monitoring plan6.7Proposed monitoring indicators6.8Conclusions and recommendations6.9Report and presentation6.10Final project: final review with your tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SiliconExpert, Z2Data, IBM Maximo, Octopart and Microsoft Excel, in free, academic or evaluation versions. Exercises are based on real procedures: obsolescence analysis of an industrial control system, economic evaluation of replacement strategies and preparation of an obsolescence management plan. Assessment is continuous by module, plus the final capstone project.
Standards covered: IEC 62402, IEC 60300-3-3, ISO 55001, IEC 62435-1, IEC 60812, SAE AS5553, IEC 61508.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SiliconExpert, Z2Data, IBM Maximo, Octopart, Microsoft Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Urban electric scooter course
Online course of 300 hours in urban electric scooters, in 6 modules covering e-scooter architecture, PMV regulation under Royal Decree 970/2020 and EN 17128, batteries and…
Global battery market course
Online course of 300 hours in the global battery market. 6 modules covering market structure, raw materials and refining, technologies and competition, industrial and trade policy,…
Battery module repair course
Online course of 300 hours in battery module repair, structured in 6 modules covering module and pack construction, repair safety, cell and module diagnostics, repair techniques…
More in Electromobility, Batteries & Hydrogen
All Electromobility, Batteries & Hydrogen programmes → · How to apply · Fees & financing · Scholarships