Course in International Regulation of Command and Control Systems
300-hour online course in international regulation of command and control systems. 6 modules covering Additional Protocol I to the Geneva Conventions, Articles 36 and 57, DoD Directive 3000.09 (autonomy in weapon systems) and Cameo Systems Modeler (SysML). Assigned tutor and open enrolment.
Course in International Regulation of Command and Control Systems — studying from Singapore
Singapore maintains a comprehensive defence sector through the Ministry of Defence and the Defence Science and Technology Agency, which develops military technologies and manages procurement. Engineering work covers land systems, ammunition, command and control, and simulation. Industry partners include ST Engineering, which supplies defence and security systems globally. Engineers here work within strict security and export control frameworks, often combining systems integration with reliability and safety engineering.
Fees for Singapore: S$1,060 (Singapore dollar), with instalments and employer sponsorship available.
Relevant bodies in Singapore
Typical roles
Questions from Singapore
How does defence engineering work in Singapore, and which bodies oversee it?
Singapore's defence engineering is largely centred on the Ministry of Defence (MINDEF) and DSTA, the defence procurement and development agency, along with the Singapore Armed Forces. Engineers may register with the Professional Engineers Board (PEB). SEIUM's qualifications are private, not state degrees, and not accredited by any national body, so recognition for defence roles depends on the employer or relevant authority.
Who employs defence and land systems engineers in Singapore?
Main employers include MINDEF, DSTA, the SAF, and defence industry companies including ST Engineering. Access to many roles requires security clearance and citizenship or residency rules, so check eligibility early. Employers focus on proven competence and clearance status. Your final project can illustrate technical capability, but it does not replace these requirements.
Is the course manageable alongside a job, and can employers fund it?
The programme is fully online and taught in English, with an assigned technical tutor. Plan for a heavy workload: 1,900 hours for a master's, 800 for a postgraduate diploma, or 300 for a specialist course. Fees are payable in instalments, and employer sponsorship is possible, which is common in defence-linked organisations, though approval is up to them.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the architecture and functions of command and control systems.
Identify the obligations of international law that apply to their design and use.
Analyse the legal and ethical risks of automation and decision support.
Apply human-centred design principles and effective human control.
Manage information and data in line with protection and security requirements.
Establish mechanisms for oversight, training and continuous improvement.
Prepare a regulatory compliance analysis for a command and control system.
Who it's for
- Command and control systems engineer looking to specialise in International Regulation of Command and Control Systems.
- Operational legal adviser looking to specialise in International Regulation of Command and Control Systems.
- Human factors specialist looking to specialise in International Regulation of Command and Control Systems.
- Systems requirements analyst looking to specialise in International Regulation of Command and Control Systems.
- Information security manager looking to specialise in International Regulation of Command and Control Systems.
- Governance consultant for automated systems looking to specialise in International Regulation of Command and Control Systems.
- Engineering or science graduates looking to enter the defence sector.
What you'll work with
- Additional Protocol I to the Geneva Conventions, Articles 36 and 57
- DoD Directive 3000.09 (autonomy in weapon systems)
- ISO/IEC/IEEE 15288 (system life cycle processes)
- ISO 9241-210 (human-centred design)
- MIL-STD-1472H (human factors engineering)
- ISO/IEC 27001 (information security)
- AQAP-2110 (NATO quality requirements)
6 modules · 300 h
1.1Function of a command and control system1.2Components: people, processes, information and technology1.3Levels of decision-making and how they are reflected in the system1.4Decision cycle and its IT support1.5Interoperability between organisations1.6Applicable legal framework by layers1.7Actors: State, international organisation and industry1.8Field vocabulary and acronyms1.9Public documentary sources1.10Exercise: describe a system and its actors
2.1International humanitarian law and the decision chain2.2Principles of distinction, proportionality and precaution2.3Command responsibility and its scope2.4Duty to investigate and to be accountable2.5Recording decisions as a legal safeguard2.6Legal review of new means and methods2.7Applicable human rights law2.8Multinational operations and applicable law2.9Status of forces agreements2.10Practice: analyse the chain of responsibility in a case
3.1Degrees of automation in decision support3.2Meaningful human control in decision-making3.3Automation bias and its legal consequences3.4Explainability required of the tool3.5Data quality and its effect on decisions3.6Traceability and auditability of recommendations3.7Legal review of a support system3.8European artificial intelligence regulation and exclusions3.9International debate on autonomy3.10Practice: define the human controls of a system
4.1Classification of information and its handling4.2Information sharing between organisations4.3Protection of personal data in these systems4.4Retention and archiving of records4.5Access for oversight bodies4.6Protection of communications and accreditation4.7System cybersecurity and its governance4.8Interoperability and data-sharing agreements4.9Possible transparency and its limits4.10Practice: information-sharing policy
5.1Democratic and civilian control of the system5.2Parliamentary and independent oversight5.3Audit of the system and its records5.4Incident investigation and lessons learned5.5Legal training for operational personnel5.6Operational legal adviser and their role5.7Exercises and validation of procedures5.8Change management of the system5.9Compliance and quality indicators5.10Practice: design the oversight scheme
6.1Choice of system and its context6.2Functional and actor description6.3Map of the applicable legal framework6.4Analysis of the chain of responsibility6.5Design of human control and traceability6.6Information and data protection policy6.7Oversight and audit scheme6.8Legal training plan for personnel6.9Analysis report6.10Project defence
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded lectures and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it easy to fit around work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Cameo Systems Modeler (SysML), IBM DOORS, MATLAB, Python (pandas), in free, academic or evaluation versions. Case studies are worked through using real procedures for compliance reviews under international law, human factors assessments of command posts, and analyses of automated decision-support cases. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the architecture and functions of command and control systems.
Identify the obligations of international law that apply to their design and use.
Analyse the legal and ethical risks of automation and decision support.
Apply human-centred design principles and effective human control.
Manage information and data in line with protection and security requirements.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish-language proficiency to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is an average of 10 to 15 hours a week, compatible with a full-time job.
You will work with Cameo Systems Modeler (SysML), IBM DOORS, MATLAB, Python (pandas). Free, academic or evaluation versions are used, and the tutor will indicate the open-source alternative where one exists.
SEIUM's own diploma, awarded on passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
Course in Ethics in Dual Civil-Military Certification
Online 300-hour course in ethics in dual civil-military certification. 6 modules covering Regulation (EU) 2021/821 (dual-use products), Law 53/2007 (control of foreign trade in defence material…
Cyber Defence Policies and Society Course
300-hour online course in cyber defence policies and society. 6 modules covering Directive (EU) 2022/2555 (NIS2), Regulation (EU) 2019/881 (Cybersecurity Act) and MISP. Assigned tutor and…
Course in Ethics in Ethical and Academic Certification
Online 300-hour course in Ethics in Ethical and Academic Certification. 6 modules covering the European Code of Conduct for Research Integrity (ALLEA), ISO 37301 (compliance management…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships