Preventive maintenance course for helicopters
Online course of 300 hours in helicopter preventive maintenance. 6 modules covering the maintenance regulatory framework, scheduled inspections, transmission and dynamic systems, condition monitoring and HUMS, and planning and human factors, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Interpret the regulatory framework for aircraft maintenance.
Plan scheduled helicopter inspections.
Assess the condition of transmissions and dynamic systems.
Use HUMS data in condition-based maintenance.
Apply human factors principles in maintenance.
Optimise preventive maintenance programmes.
Manage reliability and cost indicators.
Who it's for
- Helicopter maintenance technicians
- Continuing airworthiness engineers
- Operator maintenance managers
- Maintenance planners
- Aviation quality inspectors
- Fleet reliability analysts
- Engineering or science graduates looking to move into helicopter aviation
What you'll work with
- Regulation (EU) No 1321/2014 (continuing airworthiness of aircraft)
- CS-29 (EASA) (certification specifications for large rotorcraft)
- CS-27 (EASA) (certification specifications for small rotorcraft)
- ATA MSG-3 (operator/manufacturer scheduled maintenance development)
- ATA iSpec 2200 (information standards for aviation maintenance)
- UK CAA CAP 753 (helicopter vibration health monitoring guidance)
- FAA AC 29-2C (certification of transport category rotorcraft)
- Regulation (EU) No 376/2014 (reporting, analysis and follow-up of occurrences in civil aviation)
- AMOS (Swiss AviationSoftware)
- TRAX
- CAMO+
- the manufacturer's HUMS software
- Microsoft Excel
6 modules
1.1Continuing airworthiness and Part-M1.2Part-145 maintenance organisations1.3Part-66 technician licences1.4Aircraft maintenance programme1.5Manufacturer technical documentation1.6Airworthiness directives1.7Service bulletins1.8Maintenance records and traceability1.9Airworthiness review certificate1.10Case study: audit of a helicopter maintenance programme
2.1Daily and pre-flight inspections2.2Inspections by hours, cycles and calendar2.3Life-limited components2.4Main rotor blade inspection2.5Hub and swashplate inspection2.6Tail rotor and drive train inspection2.7Turboshaft engine inspection2.8Non-destructive testing on helicopters2.9Structural corrosion inspection2.10Practical exercise: task list for a 100-hour inspection
3.1Main gearbox3.2Magnetic chip detectors3.3Spectrometric oil analysis3.4Bearings and couplings3.5Tail rotor drive shafts3.6Clutch and freewheel unit3.7Lead-lag dampers3.8Blade balancing and tracking3.9Flight control rigging3.10Workshop: interpreting a transmission oil analysis
4.1Principles of HUMS systems4.2Transmission vibration monitoring4.3Condition indicators and thresholds4.4Usage and cycle monitoring4.5Data trend analysis4.6Condition-based maintenance4.7Integrating HUMS into the programme4.8False alarms and alert validation4.9Examples of early fault detection4.10Lab: HUMS trend analysis of a main gearbox
5.1MSG-3 philosophy for programme development5.2Planning of maintenance checks5.3Management of spares and rotable components5.4Human factors in maintenance5.5Maintenance errors and the Dirty Dozen5.6Safety management system5.7Occurrence reporting5.8Programme reliability indicators5.9Maintenance costs per flight hour5.10Case study: analysis of a maintenance error in a transmission
6.1Selection of the helicopter and the operation6.2Analysis of the current programme6.3Identification of critical tasks6.4Programme improvement proposal6.5Integration of condition monitoring6.6Resource planning6.7Monitoring indicators6.8Project conclusions6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine the programme with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is AMOS (Swiss AviationSoftware), TRAX, CAMO+, the manufacturer's HUMS software and Microsoft Excel, in free, academic or evaluation versions. Testing is studied through real procedures: review of a maintenance programme, analysis of condition monitoring data and planning of a scheduled check. Assessment is continuous by module, plus the final capstone project.
Standards covered: Regulation (EU) No 1321/2014, CS-29 (EASA), CS-27 (EASA), ATA MSG-3, ATA iSpec 2200, UK CAA CAP 753, FAA AC 29-2C, Regulation (EU) No 376/2014
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with AMOS (Swiss AviationSoftware), TRAX, CAMO+, the manufacturer's HUMS software and Microsoft Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required: you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
CS-27 Certification Course (Light Helicopters)
Online course of 300 hours in CS-27 certification (light helicopters), structured in 6 modules covering the certification framework, rotorcraft flight and performance, rotors, transmissions and structures,…
Introduction to Airframe Design Course
Online course of 300 hours in introductory fuselage design. 6 modules covering fuselage functions and configuration, fuselage loads, semi-monocoque structural design, materials and manufacturing, and analysis…
Aerodynamic calculation course in wind tunnels
Online course of 300 hours in wind tunnel aerodynamic analysis: 6 modules covering wind tunnels and similarity, models and balances, measurement techniques, corrections and data processing,…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships