Postgraduate Diploma in Safety Signage, Instructions and Label Design
Online 800-hour Postgraduate Diploma in Safety Signage, Instructions and Label Design. 8 modules covering ISO 7010 (registered safety signs), ISO 3864 (safety colours and signs) and Adobe Illustrator. Assigned tutor and enrolment open.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply the principles of safety communication and the hierarchy of warnings.
Design safety signs in accordance with ISO 7010 and ISO 3864.
Write clear, structured instructions for use in line with IEC/IEEE 82079-1.
Produce medical device labelling using standardised symbols.
Apply CLP requirements to the labelling of chemical and consumer products.
Assess label comprehension through user testing.
Develop a complete labelling project for a regulated product.
Who it's for
- Regulatory labelling specialist wishing to specialise in Safety Signage, Instructions and Label Design.
- Technical writer wishing to specialise in Safety Signage, Instructions and Label Design.
- Information designer wishing to specialise in Safety Signage, Instructions and Label Design.
- Regulatory affairs technician wishing to specialise in Safety Signage, Instructions and Label Design.
- Product safety technician wishing to specialise in Safety Signage, Instructions and Label Design.
- Prepress and packaging manager wishing to specialise in Safety Signage, Instructions and Label Design.
- Engineering or science graduates seeking to enter the medical device industry.
What you'll work with
- ISO 7010 (registered safety signs)
- ISO 3864 (safety colours and signs)
- IEC/IEEE 82079-1 (instructions for use)
- ISO 15223-1 (symbols for medical devices)
- Regulation (EC) 1272/2008 (CLP)
- Royal Decree 485/1997 (safety signage at work)
- ANSI Z535 (safety signs)
- Regulation (EU) 2017/745 (medical devices)
8 modules · 800 h
1.1Control hierarchy and warnings1.2Warning processing model1.3User risk perception1.4Liability for information defects1.5Machinery Directive and Regulation 2023/12301.6General Product Safety Regulation1.7CE marking and information1.8Intended users and reasonably foreseeable misuse1.9Plain language in warnings1.10Case study: analysis of information failures in products
2.1ISO 3864 colours and shapes2.2ISO 7010 registered signs2.3Royal Decree 485/19972.4ANSI Z535 series of standards2.5Three-panel warning signs2.6Signal words2.7Hazard and action pictograms2.8Photoluminescent evacuation signage2.9Comprehensibility of symbols2.10Workshop: designing a warning panel
3.1IEC/IEEE 82079-1 standard on use information3.2User analysis3.3Structure of instructions3.4Safety instructions3.5Step-by-step procedures3.6Technical illustrations and exploded views3.7Electronic-format instructions3.8Translation and localisation3.9Usability testing3.10Practice: writing instructions for a machine
4.1Requirements of Annex I of the MDR4.2ISO 15223-1 symbols4.3UDI on the label4.4Electronic instructions: Regulation 2021/22264.5Languages and Member States4.6Labelling of sterile products4.7Devices for laypersons4.8Usability validation4.9Change control4.10Practice: label compliant with ISO 15223-1
5.1CLP Regulation on classification and labelling5.2Globally Harmonised System pictograms5.3H and P statements5.4Safety data sheets5.5Battery labelling5.6Toys and warnings5.7Energy labelling of products5.8Digital product passport5.9Food labelling and allergens5.10Case study: CLP label for a mixture
6.1Typography and legibility6.2Contrast and colour6.3Information hierarchy6.4Accessible label design6.5QR codes and digital content6.6Materials and durability6.7Placement on the product6.8Label formats6.9Design tools6.10Laboratory: legibility testing
7.1Comprehension testing7.2ANSI and ISO assessment standards7.3Content management7.4Translation management7.5Document version control7.6Regulatory review of labelling7.7Recalls due to labelling7.8Labelling quality indicators7.9Audit of the labelling process7.10Workshop: comprehension assessment protocol
8.1Product and users8.2Risk analysis8.3Applicable regulatory requirements8.4Signs and warnings8.5Drafting the instructions8.6Label design8.7User evaluation8.8Management plan8.9Report and presentation8.10Final review with the tutor
How you'll learn
Training 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Adobe Illustrator, Adobe InDesign, BarTender, Loftware, MadCap Flare, in free, academic or evaluation versions. Tests are studied using real procedures for symbol comprehension testing with users, review of medical device and chemical product labels, and drafting and validation of instructions for use. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Apply the principles of safety communication and the hierarchy of warnings.
Design safety signs in accordance with ISO 7010 and ISO 3864.
Write clear, structured instructions for use in line with IEC/IEEE 82079-1.
Produce medical device labelling using standardised symbols.
Apply CLP requirements to the labelling of chemical and consumer products.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with Adobe Illustrator, Adobe InDesign, BarTender, Loftware, MadCap Flare. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry title.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the advanced programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Experimental Protocols and Research Ethics
Online 800-hour Postgraduate Diploma in Experimental Protocols and Research Ethics. 8 modules with the Declaration of Helsinki (WMA), Law 14/2007 on Biomedical Research and R. Assigned…
Postgraduate Diploma in FDA 510(k)/De Novo: Dossier Preparation
800-hour online Postgraduate Diploma in FDA 510(k)/De Novo: Dossier Preparation. 8 modules covering 21 CFR Part 807, Subpart E (premarket notification 510(k)), 21 CFR Part 860…
Postgraduate Diploma in On-Prem/Cloud Deployment and Monitoring
Online 800-hour Postgraduate Diploma in On-Prem/Cloud Deployment and Monitoring. 8 modules covering ISO/IEC 27001 (information security management), Esquema Nacional de Seguridad (Royal Decree 311/2022) and Terraform.…
More in Health, Biomechanics, Wearables & Operational Safety
All Health, Biomechanics, Wearables & Operational Safety programmes → · How to apply · Fees & financing · Scholarships