Postgraduate Diploma in NATO Standards for Land Powerpacks
Online 800-hour Postgraduate Diploma in NATO standards for Land Powerpacks. 8 modules covering STANAG 1135 (interchangeability of fuels and lubricants), MIL-STD-1275E (28 V electrical systems in military vehicles) and GT-SUITE. Assigned tutor and open enrolment.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the architecture of land vehicle powerpacks.
Interpret the structure and application of the relevant NATO standardisation documents.
Apply the requirements for interchangeability of fuels and lubricants.
Verify electrical and data interfaces against the standards.
Define environmental and performance requirements for the engine-transmission assembly.
Assess the reliability, maintainability and logistic support of the powerpack.
Prepare a compliance dossier.
Who it's for
- Land propulsion systems engineers who want to specialise in NATO Standards for Land Powerpacks.
- NATO standardisation specialists who want to specialise in NATO Standards for Land Powerpacks.
- Defence quality engineers who want to specialise in NATO Standards for Land Powerpacks.
- Reliability and maintainability engineers who want to specialise in NATO Standards for Land Powerpacks.
- Product compliance managers who want to specialise in NATO Standards for Land Powerpacks.
- Integrated logistic support engineers who want to specialise in NATO Standards for Land Powerpacks.
- Graduates in engineering or science seeking to enter the land defence industry.
What you'll work with
- STANAG 1135 (interchangeability of fuels and lubricants)
- MIL-STD-1275E (28 V electrical systems in military vehicles)
- MIL-STD-810H (environmental testing)
- AECTP-200 (NATO environmental conditions)
- MIL-STD-461G (electromagnetic compatibility)
- AQAP-2110 (NATO quality assurance requirements)
- Regulation (EU) 2016/1628 (emissions from non-road mobile machinery engines)
8 modules · 800 h
1.1Concept of the integrated powerpack1.2Components: engine, transmission and cooling1.3Rapid replacement in the field1.4Mechanical, electrical and fluid interfaces1.5Examples: Leopard 2, Leclerc, Abrams1.6NATO single-fuel policy1.7Standardisation and mutual support1.8Powerpack lifecycle1.9Technology trends1.10Workshop: breakdown of a powerpack
2.1NATO Standardization Organization (NSO)2.2STANAG, AEP and AAP2.3Ratification process2.4National implementation2.5Land working groups2.6NATO Standardization Document Database2.7Relationship with civil standards2.8Exceptions and reservations2.9Updating standards2.10Practical exercise: searching for standards applicable to a powerpack
3.1STANAG 4362 and F-34 fuel3.2Single-fuel policy3.3Fuel quality and contamination3.4Military lubricants and specifications3.5NATO coding of petroleum products3.6Biofuel compatibility3.7Storage and stability3.8Fuel testing3.9Fuel logistics3.10Case study: impact of an alternative fuel
4.128 V voltages according to MIL-STD-12754.2Jump-starting between NATO vehicles4.3Standardised connectors4.4CAN bus and SAE J19394.5Generic Vehicle Architecture4.6Standardised diagnostics4.7Electromagnetic compatibility4.8Power management4.9Interface cyber security4.10Laboratory: analysis of J1939 messages
5.1AECTP-200 environmental conditions5.2Operation in extreme climates5.3Altitude and pressure5.4Fording and immersion5.5Vibration and shock5.6Dust and air filtration5.7Noise and signatures5.8Cold starting5.9Qualification testing5.10Practical exercise: environmental test plan
6.1RAM requirements6.2Maintainability in the field6.3Standardised tools and equipment6.4Interchangeability between nations6.5NATO coding of spare parts6.6Technical publications6.7Integrated logistic support6.8AQAP quality assurance6.9Lifecycle costs6.10Case study: field replacement analysis
7.1Emissions regulations and exemptions7.2NATO energy strategy7.3Hybridisation and electrification7.4Smart Energy in operations7.5Reducing logistic footprint7.6Environmental noise at bases7.7Management of maintenance waste7.8Lifecycle and recycling7.9Climate commitments7.10Workshop: energy assessment of a fleet
8.1Definition of the powerpack8.2Identification of NATO standards8.3Compliance matrix8.4Standardised interfaces8.5Qualification plan8.6Logistic support plan8.7Gap analysis8.8Recommendations8.9Report and presentation8.10Final review with the tutor
How you'll learn
Fully 100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, making it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is GT-SUITE, MATLAB/Simulink, Vector CANoe, advanced Excel, in free, academic or evaluation versions. Tests are studied using real procedures for compliance matrices, environmental testing of powerpacks on the bench, and verification of electrical and data interfaces. Assessment is continuous per module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the architecture of land vehicle powerpacks.
Interpret the structure and application of the relevant NATO standardisation documents.
Apply the requirements for interchangeability of fuels and lubricants.
Verify electrical and data interfaces against the standards.
Define environmental and performance requirements for the engine-transmission assembly.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme is 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with GT-SUITE, MATLAB/Simulink, Vector CANoe and advanced Excel. Free, academic or evaluation versions are used, and the tutor will point out a free alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the final integrative project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Diploma in Digital Thread in Defence
Online postgraduate diploma of 800 hours in digital thread in defence. 8 modules covering the shift from documents to models, model-based engineering, PLM and configuration management,…
Diploma in Redundancy Strategies for Resilient Autonomy
Online postgraduate diploma of 800 hours in redundancy strategies for resilient autonomy. 8 modules covering failure modes, redundancy theory, fault-tolerant architectures, fault detection and isolation, redundant…
Diploma in Experimental Validation and Scaling in Thermal-Hydraulics
Online postgraduate diploma of 800 hours in experimental validation and scaling in thermal-hydraulics. 8 modules covering nuclear safety experiments, scaling theory, instrumentation, test facility design, separate…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships