Apply now
Postgraduate DiplomaAutomotive & Motorsport Applications open

Postgraduate Diploma in Balance Testing and Blockage Corrections

Online 800-hour Postgraduate Diploma in Balance Testing and Blockage Corrections. 8 modules covering SAE J2071, SAE J2084 and MATLAB. Dedicated tutor and open enrolment.

Duration800 h
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma
Enrol now View syllabus Ask an advisor
Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Select and configure aerodynamic balances.

02

Calibrate balances using calibration matrices.

03

Plan wind tunnel tests.

04

Apply appropriate blockage corrections.

05

Apply other experimental corrections.

06

Analyse balance data and produce aerodynamic maps.

07

Calculate test uncertainty.

Profile

Who it's for

  • Wind tunnel engineer who wishes to specialise in Balance Testing and Blockage Corrections.
  • Aerodynamic test engineer who wishes to specialise in Balance Testing and Blockage Corrections.
  • Metrology engineer who wishes to specialise in Balance Testing and Blockage Corrections.
  • Aerodynamics engineer who wishes to specialise in Balance Testing and Blockage Corrections.
  • Instrumentation technician who wishes to specialise in Balance Testing and Blockage Corrections.
  • Aerodynamic data analyst who wishes to specialise in Balance Testing and Blockage Corrections.
  • Graduates in engineering or science seeking to enter motorsport.
Standards & tools

What you'll work with

  • SAE J2071
  • SAE J2084
  • SAE J1594
  • ISO/IEC 17025
  • ISO/IEC Guide 98-3
  • ISO 376
  • FIA Formula 1 Sporting Regulations
Syllabus

8 modules · 800 h

  1. 1.1External and internal balances
  2. 1.2Six-component balances
  3. 1.3Load cells and strain gauges
  4. 1.4Interactions between components
  5. 1.5Range and resolution
  6. 1.6Model mounting
  7. 1.7Struts and their influence
  8. 1.8Temperature and drift
  9. 1.9Balance selection
  10. 1.10Case study: specifying a balance for a wind tunnel
  1. 2.1Calibration matrices
  2. 2.2Calibration loads and tooling
  3. 2.3First- and second-order calibration
  4. 2.4Correction of cross-interactions
  5. 2.5Calibration uncertainty
  6. 2.6Periodic balance recalibration
  7. 2.7Verification with known loads
  8. 2.8Documentation and archiving of results
  9. 2.9Metrological traceability of standards
  10. 2.10Laboratory: calculating a calibration matrix
  1. 3.1Types of wind tunnels for automotive use
  2. 3.2Moving ground and rollers
  3. 3.3Rotating wheels and their measurement
  4. 3.4Speed and temperature control
  5. 3.5Ride height and yaw sweeps
  6. 3.6Test repeatability
  7. 3.7Campaign planning
  8. 3.8Regulatory restrictions on hours
  9. 3.9Safety in wind tunnel operation
  10. 3.10Practice: ride height sweep test plan
  1. 4.1Solid blockage of the model
  2. 4.2Wake blockage
  3. 4.3Maskell methods
  4. 4.4Mercker-Wiedemann methods
  5. 4.5Pressure gradient corrections
  6. 4.6Corrections for open test sections
  7. 4.7Corrections for closed test sections
  8. 4.8Ground effects in corrections
  9. 4.9Comparison of methods
  10. 4.10Workshop: applying the Maskell correction
  1. 5.1Correction for struts and supports
  2. 5.2Moving ground correction
  3. 5.3Ground boundary layer
  4. 5.4Temperature and density correction
  5. 5.5Reynolds correction
  6. 5.6Tare and model weight
  7. 5.7Drift corrections
  8. 5.8Automatic post-processing of results
  9. 5.9Validation of corrections
  10. 5.10Practice: calculating model tare
  1. 6.1Calculation of aerodynamic coefficients
  2. 6.2Construction of aerodynamic maps
  3. 6.3Sensitivities to ride height and yaw
  4. 6.4Statistical repeatability analysis
  5. 6.5Anomaly detection
  6. 6.6Visualisation of test results
  7. 6.7Test report
  8. 6.8Comparison between configurations
  9. 6.9Databases
  10. 6.10Case study: aerodynamic map of a single-seater
  1. 7.1Uncertainty calculation according to the GUM
  2. 7.2Sources of uncertainty
  3. 7.3Combined uncertainty calculation
  4. 7.4Repeatability and reproducibility
  5. 7.5Comparison between wind tunnels
  6. 7.6Laboratory accreditation
  7. 7.7Quality management
  8. 7.8Quality system audits
  9. 7.9Continuous process improvement cycle
  10. 7.10Case study: uncertainty budget for a balance
  1. 8.1Test definition
  2. 8.2Balance calibration
  3. 8.3Test plan
  4. 8.4Blockage corrections
  5. 8.5Data analysis
  6. 8.6Test uncertainty analysis
  7. 8.7Comparison with CFD
  8. 8.8Final results report
  9. 8.9Dissertation and presentation
  10. 8.10Final review with the tutor
Methodology, software & labs

How you'll learn

100% online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB, LabVIEW, Python, Excel, DEWESoft, in free, academic or evaluation versions. Studies are based on real wind tunnel balance test procedures, balance calibrations with reference loads, and test uncertainty analysis. Assessment is continuous, module by module, plus the final integrating project.

Accredited laboratories(EN ISO/IEC 17025) with a rotor rig, EMC/Lightning pre-compliance, HIL/SIL and vibration/acoustics.
Evidence-oriented thesis:safety case, test plan, compliance dossier and operational limits.
Industry mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with cyber-OT, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Test definition

Select and configure aerodynamic balances.

Balance calibration

Calibrate balances using calibration matrices.

Test plan

Plan wind tunnel tests.

Blockage corrections

Apply appropriate blockage corrections.

Data analysis

Apply other experimental corrections.

Career opportunities

Where this takes you

Wind tunnel engineerAerodynamic test engineerMetrology engineerAerodynamics engineerInstrumentation technicianAerodynamic data analyst
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. A university degree is not required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient Spanish to follow technical standards documentation.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

Apply now Scholarships
FAQ

Frequently asked questions

The programme totals 800 hours, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.

We work with MATLAB, LabVIEW, Python, Excel and DEWESoft. Free, academic or evaluation versions are used, and the tutor will indicate the open-source alternative where one exists.

A SEIUM diploma awarded on passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.

Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the advanced programme. Check the recognition policy when you enrol.

Keep exploring

Related programmes

See all in Automotive & Motorsport
Postgraduate Diploma1,000 $

Diploma in Energy Trading for Mobility Hubs

Online postgraduate diploma of 800 hours in energy trading for mobility hubs. 8 modules covering fundamentals, regulatory framework, analysis methods, design, systems integration, risk, validation and…

800 hours · 6–8 monthsOnlineAutomotive & Motorsport
Postgraduate Diploma1,440 $

Postgraduate Diploma in 5-Axis and HSM Strategies for Racing

800-hour online Postgraduate Diploma in 5-Axis and HSM Strategies for Racing. 8 modules covering ISO 230-1 test code for machine tools, ISO 10791-6 5-axis machining centres…

800 hOnlineAutomotive & Motorsport
Postgraduate Diploma2,000 $

Postgraduate Diploma in Barriers, Protections and Impact Energy Management

Online 800-hour Postgraduate Diploma in Barriers, Protections and Impact Energy Management. 8 modules with Appendix O of the FIA International Sporting Code (circuits), FIA Standard 3501-2010…

800 hOnlineAutomotive & Motorsport
Postgraduate Diploma in Balance Testing and Blockage CorrectionsEnrol
Related programmes

More in Automotive & Motorsport

Postgraduate Diploma in DIL Correlation and Driver ParameterisationView programme →Diploma in Energy Trading for Mobility HubsView programme →Diploma in Audiovisual Rights and Multi-Platform ExploitationView programme →Postgraduate Diploma in Basic Driver Technical TrainingView programme →Postgraduate Diploma in Kart Chassis and Bodywork/Pressure SetupView programme →Postgraduate Diploma in Surface Finish and Form ControlView programme →

All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships

Scroll to Top
SEIUM – Institute of Advanced Engineering
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.