Master’s in Teleoperation and Remote Centres Engineering
Online master's programme of 1,900 hours in teleoperation and remote operations centre engineering, with 12 modules covering low-latency communications, remote video and perception, operator interfaces, control with time delay, human factors, remote operations centres, functional safety (ISO 13849-1, ISO 17757), cybersecurity (IEC 62443), retrofitting and operation, with an assigned technical tutor.
Master’s in Teleoperation and Remote Centres Engineering — studying from New Zealand
Off-road and special vehicle engineering is a major strength in New Zealand, reflecting the importance of agriculture, forestry, mining and construction. Manufacturers and fabricators in the Waikato and Canterbury produce tractors, harvesters, dairy equipment and specialised machinery, many of which are exported worldwide. Engineers in this field work on design, testing and safety compliance for equipment used on farms, in plantations and on remote worksites.
Fees for New Zealand: NZ$15,700 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
Which New Zealand bodies relate to off-road and specialist vehicle engineering?
Engineering New Zealand is the main professional body, and vehicle compliance is handled by the NZ Transport Agency Waka Kotahi. Heavy machinery and certain specialist vehicles can also fall under WorkSafe New Zealand rules. SEIUM's qualifications are private and not accredited by any national body, so employers and regulators decide their value.
Who hires off-road and special vehicle engineers in New Zealand?
Employers include forestry and agricultural equipment firms, mining and civil construction contractors, fabrication shops, and emergency or utility vehicle fleets. Practical design, safety and maintenance skills are central to hiring. A SEIUM qualification may help, but its weight depends on the employer.
How does the study load work for someone with a job here?
The programme is fully online, so you can study around work from anywhere in New Zealand without a student visa. Specialist courses take 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. You get an assigned technical tutor, and fees can be paid in instalments or sponsored by an employer.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Design teleoperation architectures for machinery.
Size low-latency communications.
Design ergonomic remote stations.
Apply control techniques for time delay.
Assess human factors in teleoperation.
Ensure functional safety and cybersecurity.
Plan remote operations centres.
Who it's for
- Teleoperation engineers working on mining, demolition or decommissioning machines.
- Industrial communications engineers sizing low-latency links.
- Remote control interface designers focused on operator stations.
- Human factors specialists assessing workload and situational awareness.
- Remote operations centre managers planning rooms, shifts and procedures.
- Industrial cybersecurity engineers protecting remote systems.
- Engineering or science graduates looking to enter the mining sector.
What you'll work with
- UNE-EN ISO 13849-1 (safety of control systems)
- ISO 17757 (safety of autonomous machines in mining)
- IEC 62443 (industrial cybersecurity)
- UNE-EN ISO 11064 (design of control centres)
- UNE-EN ISO 13850 (emergency stop)
- Regulation (EU) 2023/1230 (machinery)
- ROS 2
- Unity
- MATLAB/Simulink
- Wireshark
12 modules · 1900 h
1.1Historical evolution of teleoperation1.2Applications in mining and demolition1.3Decommissioning and hazardous environments1.4Levels of operator assistance1.5Architecture of a teleoperated system1.6Safety and productivity benefits1.7Current technical limitations1.8Industrial application cases1.9Regulatory framework for teleoperation1.10Case study: teleoperation in a collapse zone
2.1Communication requirements2.2End-to-end latency2.3Delay variation (jitter)2.4Required bandwidth2.5Private LTE and 5G networks2.6Industrial Wi-Fi networks2.7Satellite links2.8Link redundancy2.9Quality of service2.10Practical: latency budget for a link
3.1Camera selection and placement3.2H.264 and H.265 video encoding3.3Video latency3.4360-degree views3.5Remote stereoscopic vision3.6Augmented reality for the operator3.7Ambient machine sound3.8Sensor data on screen3.9Adaptive video quality3.10Lab: measuring video latency
4.1Types of teleoperation stations4.2Controls and joysticks4.3Displays and layout4.4Virtual reality headsets4.5Ergonomics of the remote station4.6Information shown to the operator4.7Alarm management4.8Operator-specific customisation4.9User-centred design4.10Workshop: designing a remote station
5.1Effect of latency on control5.2Supervisory task control5.3Predictive motion displays5.4Shared control with the machine5.5Automatic operator assistance5.6Haptic force feedback5.7Loop stability with delay5.8Passivity-based approaches5.9Tests with operators5.10Practical: delay compensation
6.1Operator mental workload6.2Remote situational awareness6.3Fatigue during long shifts6.4Simulator sickness6.5Operator selection6.6Training programmes6.7Shift organisation6.8Assessment with NASA-TLX6.9Human error in teleoperation6.10Case study: workload assessment
7.1Control room design7.2Multiple stations per operator7.3Supervision of several machines7.4Roles and responsibilities7.5Centre operating procedures7.6Business continuity7.7Centre infrastructure7.8Examples of existing centres7.9Centre costs7.10Case study: design of a remote centre
8.1Remote emergency stop8.2Watchdog supervision8.3Reaction to link loss8.4ISO 13849 requirements8.5ISO 17757 requirements8.6Zone access control8.7Safety validation8.8Risk analysis8.9System documentation8.10Practical: link-loss analysis
9.1Threats to remote systems9.2Communication encryption9.3Operator authentication9.4Network segmentation9.5IEC 62443 requirements9.6Security monitoring9.7Incident response9.8Security audits9.9European regulatory framework9.10Lab: secure network architecture
10.1Commercial teleoperation kits10.2Integration with existing machines10.3Actuators for controls10.4Additional sensors on the machine10.5Acceptance testing10.6Equipment maintenance10.7Supplier selection10.8Retrofitting costs10.9Retrofitting cases10.10Case study: retrofitting an excavator
11.1Performance indicators11.2Productivity compared with local operation11.3Continuous operator training11.4Shift-based work organisation11.5Legal aspects of remote operation11.6Insurance and liabilities11.7Service contracts11.8Scaling up the operation11.9Future trends in teleoperation11.10Case study: business case for a remote centre
12.1Definition of machine and mission12.2Communication requirements12.3Remote station design12.4Delay control strategy12.5Safety analysis12.6System cybersecurity12.7Validation plan12.8Economic feasibility of the centre12.9Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ROS 2, Unity, MATLAB/Simulink and Wireshark, in free, academic or evaluation versions. Testing is studied through real procedures for measuring video and control latency, operator workload assessment and link-loss tests. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: UNE-EN ISO 13849-1, ISO 17757, IEC 62443, UNE-EN ISO 11064, UNE-EN ISO 13850, Regulation (EU) 2023/1230.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ROS 2, Unity, MATLAB/Simulink and Wireshark, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Heavy Machinery Engineering
Online master's programme of 1,900 hours in heavy machinery engineering. 12 modules covering machine types, product design, structures and mechanisms, powertrain, hydraulics, stability, cab safety, electronics,…
Master’s in Resilient GNSS-Free Localisation Engineering
Online master's programme of 1,900 hours in resilient GNSS-denied localisation engineering, with 12 modules covering inertial navigation, odometry, filtering and estimator fusion, LiDAR, visual and radar…
Master’s in Materials & Processes Engineering
Online master's programme of 1,900 hours in materials and processes engineering for special vehicles and machinery. 12 modules covering materials selection, structural and high-strength steels, casting…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships