Master’s in Advanced Reverse Engineering
Online master's programme of 1,900 hours in advanced reverse engineering. 12 modules covering dimensional metrology, 3D scanning, industrial computed tomography, mesh processing, CAD reconstruction, geometrical tolerancing, material identification, replica manufacturing, functional reverse engineering and intellectual property under ISO 10360-2, VDI/VDE 2634 Part 2 and ISO 1101, with an assigned technical tutor.
Master’s in Advanced Reverse Engineering — studying from New Zealand
Vehicle restoration and classic engine work in New Zealand is supported by an active enthusiast community and a well-established network of specialist workshops, particularly around the main centres. Historic vehicle registration and compliance fall under the New Zealand Transport Agency Waka Kotahi, and the Vintage Car Club of New Zealand promotes preservation of historic vehicles. Restoration professionals often combine fabrication, engineering and heritage conservation skills.
Fees for New Zealand: NZ$11,700 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
Is restoration engineering recognised by a professional body in New Zealand?
There is no specific statutory register for classic vehicle or heritage restoration engineers in New Zealand. Heritage matters can involve Heritage New Zealand Pouhere Taonga, and vehicle roadworthiness is governed by the NZ Transport Agency Waka Kotahi. SEIUM's qualifications are private and not accredited by any national body, so their value depends on the employer or client.
Where do classic restoration specialists work in New Zealand?
Work is found in independent restoration workshops, classic car dealers, museums, and specialist fabrication businesses, many clustered around the main centres. Clients and employers usually judge by workmanship and a portfolio of completed restorations. A private qualification may complement that evidence but is rarely a deciding factor on its own.
Can I study this while running or working in a workshop here?
Yes. The course is fully online and taught in English, so you can study from home in New Zealand without a student visa. Specialist courses total 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. An assigned technical tutor supports you, and fees can be paid in instalments.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Plan complete reverse engineering projects.
Measure parts with high-precision dimensional metrology.
Capture geometries using 3D scanning and computed tomography.
Reconstruct parametric and surface CAD models.
Specify functional geometrical tolerances.
Identify materials and manufacture verified replicas.
Apply the legal framework of industrial property.
Who it's for
- Reverse engineering specialists.
- Metrology technicians.
- CAD surface designers.
- Materials engineers.
- Replica manufacturing engineers.
- Quality engineers.
- Engineering or science graduates looking to enter the automotive and restoration sectors.
What you'll work with
- ISO 10360-2 (acceptance and reverification tests for coordinate measuring machines)
- VDI/VDE 2634 Part 2 (optical 3D measuring systems — area-scanning systems)
- ISO 1101 (geometrical tolerancing)
- ASME Y14.5 (dimensioning and tolerancing)
- ISO 10303-242 (STEP managed model-based 3D engineering)
- ISO 15530-3 (CMM measurement uncertainty using calibrated workpieces)
- Directive (EU) 2016/943 (protection of trade secrets)
- Geomagic Design X
- PolyWorks
- ZEISS INSPECT
- Siemens NX
- VGSTUDIO MAX
12 modules
1.1Objectives of reverse engineering1.2Complete workflow1.3Geometric and functional reverse engineering1.4Automotive applications1.5Heritage applications1.6Aerospace and energy applications1.7Technical limitations1.8Project management1.9Process documentation1.10Case study: planning the reconstruction of a part
2.1Coordinate measuring machines2.2Articulated arms2.3Probes and sensors2.4Measurement uncertainty2.5Equipment verification2.6Temperature and environment2.7Measurement strategies2.8Measurement reports2.9Metrological traceability2.10Practical: measuring a part with a coordinate measuring machine
3.1Structured-light scanners3.2Laser scanners3.3Reference photogrammetry3.4Handheld scanners3.5Surface preparation3.6Point cloud registration3.7Resolution and accuracy3.8Scanning large parts3.9Verification of optical scanners3.10Workshop: scanning a cylinder head
4.1Principles of computed tomography4.2Equipment and sources4.3Volumetric reconstruction4.4Internal geometries4.5Porosity detection4.6Wall-thickness measurement4.7Materials and limitations4.8Assembly analysis4.9Radiation safety4.10Lab: tomographic analysis of a cast part
5.1Point cloud cleaning5.2Mesh generation5.3Hole filling5.4Decimation5.5Alignment to references5.6Region segmentation5.7Section extraction5.8Primitive detection5.9Mesh quality5.10Practical: processing a bodywork mesh
6.1Parametric modelling from meshes6.2NURBS surfaces6.3Class A surfaces6.4Hybrid modelling6.5Reconstructing design intent6.6Fitting tolerances6.7Deviation analysis6.8Exchange formats6.9Version management6.10Workshop: parametric reconstruction of a bracket
7.1GPS geometrical product specification system7.2Form and position tolerances7.3Datum systems7.4Dimensional tolerances7.5Dimension chains7.6Tolerance analysis7.7Manufacturing drawings7.8Inspection against specification7.9ISO and ASME standards7.10Practical: functional dimensioning of a reconstructed part
8.1Chemical analysis8.2Spectrometry8.3Metallography8.4Hardness testing8.5Tensile testing8.6Polymer identification8.7Original heat treatments8.8Material equivalents8.9Materials report8.10Lab: identification of an unknown alloy
9.1CNC machining9.2Casting with printed moulds9.3Metal additive manufacturing9.4Polymer additive manufacturing9.5Sheet-metal forming9.6Plastic injection moulding9.7Surface finishes9.8Quality control9.9Short runs9.10Case study: replica of a cast part from a classic vehicle
10.1Functional analysis10.2Component testing10.3Finite element simulation10.4Fluid simulation10.5Design improvements10.6Failure analysis10.7Component redesign10.8Functional validation10.9Technical report10.10Practical: redesign of a part that fails in service
11.1Industrial property and patents11.2Industrial designs11.3Trade secrets11.4Lawful reverse engineering11.5Spare parts and the repair clause11.6Licences and agreements11.7Confidentiality11.8Product liability11.9Part certification11.10Case study: legal analysis of a spare-parts project
12.1Selecting the part or system12.2State of the art12.3Measurement plan12.4Data capture12.5CAD reconstruction12.6Material and functional analysis12.7Manufacturing and verification12.8Conclusions12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Geomagic Design X, PolyWorks, ZEISS INSPECT, Siemens NX and VGSTUDIO MAX, in free, academic or evaluation versions. Testing is studied through real procedures: scanning and CAD reconstruction of a cylinder head, tomographic analysis of cast parts and dimensional verification of a replica. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: ISO 10360-2, VDI/VDE 2634 Part 2, ISO 1101, ASME Y14.5, ISO 10303-242, ISO 15530-3 and Directive (EU) 2016/943.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Geomagic Design X, PolyWorks, ZEISS INSPECT, Siemens NX and VGSTUDIO MAX, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Preventive Conservation and Storage
Online master's programme of 1,900 hours in preventive conservation and storage of collections, structured in 12 modules covering deterioration mechanisms, climate, light and pollutants, buildings and…
Master’s in Craft Upholstery & Trim
Online master's programme of 1,900 hours in craft upholstery and trim for classic vehicles. 12 modules covering period materials, pattern making, sewing and decorative techniques, seats,…
Master’s in Historic Competition Vehicle Preparation
Online master's programme of 1,900 hours in Historic Competition Vehicle Preparation. 12 modules covering historic motorsport regulations, historical research, chassis, engine and drivetrain preparation, safety, electrics,…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships