Diploma in Validation of Critical Communication Networks
Online postgraduate diploma of 800 hours in validation of critical communication networks. 8 modules covering critical network architecture, requirements engineering and test plans, performance testing, resilience and failover, security validation, interoperability and certification, with an assigned technical tutor.
Diploma in Validation of Critical Communication Networks — studying from New Zealand
New Zealand's defence engineering sector is centred on the New Zealand Defence Force, which operates land, sea and air capabilities, with major bases at Linton and Burnham. Defence procurement and sustainment are managed through the Ministry of Defence, and local firms support maintenance, communications and vehicle systems. Land systems engineering is closely linked to the country's agricultural and forestry sectors, where ruggedised vehicles and equipment are developed and maintained.
Fees for New Zealand: NZ$3,550 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
How is defence and military engineering recognised in New Zealand?
Engineering registration is handled by Engineering New Zealand, and defence procurement and security clearances are managed through the New Zealand Defence Force and government procurement processes. Security clearance requirements can matter more than academic credentials for some roles. SEIUM is a private institute, and its qualifications are not accredited by a national body, so recognition rests with the employer.
What defence and land systems employers operate in New Zealand?
Opportunities arise with the New Zealand Defence Force, Defence Technology Agency, defence industry suppliers and engineering firms serving land systems and vehicles. Many roles require citizenship or security clearance. A private online qualification may support an application, but it does not guarantee a position, and clearance and experience usually weigh more heavily.
Is it possible to study from New Zealand without a visa, and can my employer pay?
Yes, programmes are 100% online and taught in English, so no student visa is needed to study from home. Each includes an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible. Specialist courses take 300 hours, diplomas 800 and master's 1,900, so plan your workload carefully.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the architectures of critical communication networks and their requirements.
Define verifiable availability, latency and resilience requirements.
Design test plans in line with standardised methodologies.
Run performance, failover and security tests.
Validate the interoperability of radio and broadband systems.
Analyse results and write validation reports.
Manage certification and the continued validity of the network.
Who it's for
- Network validation engineers.
- Critical communications architects.
- Interoperability test engineers.
- Network cybersecurity analysts.
- Quality of service managers.
- Emergency network engineers.
- Engineering or science graduates looking to enter telecommunications.
What you'll work with
- IEC 62443 (security of industrial automation and control systems)
- ISO/IEC 27001 (information security management)
- Directive (EU) 2022/2555 NIS2 (network and information security)
- ITU-T Y.1564 (Ethernet service activation)
- IETF RFC 2544 (benchmarking of network devices)
- ETSI EN 300 392 (TETRA)
- 3GPP TS 22.179 (MCPTT)
- Wireshark
- iPerf3
- GNS3
- Spirent TestCenter
- Keysight IxNetwork
8 modules
1.1Mission-critical networks versus commercial networks1.2Redundant topologies and rings1.3TETRA and TETRAPOL networks1.4Critical broadband over LTE and 5G1.5IP/MPLS transport networks1.6Five-nines availability requirements1.7Latency, jitter and packet loss1.8Synchronisation and timing1.9Satellite backup networks1.10Case study: analysis of an emergency network
2.1Verifiable requirements and traceability2.2Verification and validation matrix2.3Test strategies by level2.4Measurable acceptance criteria2.5Test environments and laboratories2.6Configuration management of the system under test2.7Test management tools2.8Risks in the test campaign2.9Regulatory requirements of the critical operator2.10Workshop: drafting a test plan
3.1RFC 2544 methodology3.2Service activation with ITU-T Y.15643.3Traffic generators and analysers3.4Throughput and latency measurements3.5QoS and prioritisation testing3.6Scalability testing3.7Long-duration testing3.8Statistical analysis of results3.9Voice and video quality measurement3.10Lab: performance test with iPerf3
4.1Redundancy protocols: VRRP and BFD4.2Routing convergence4.3Controlled fault injection4.4Link and node loss testing4.5Power supply and physical redundancy4.6Disaster recovery4.7Measurement of restoration times4.8Chaos engineering in networks4.9PTP synchronisation testing4.10Practical exercise: failover test on a redundant ring
5.1Segmentation and zones according to IEC 624435.2Firewall and access control list testing5.3Vulnerability scanning5.4Authorised penetration testing5.5Link encryption and VPNs5.6Network identity management5.7NIS2 requirements for operators5.8Event logging and monitoring5.9Patch and vulnerability management5.10Lab: network segmentation audit
6.1TETRA and MCPTT interoperability6.2Radio-over-IP gateways6.3Protocol conformance testing6.4Interoperability profiles6.5Multi-vendor test events6.6Interoperability with third-party networks6.7Voice codecs and MOS quality6.8Management of interoperability issues6.9Interoperability between national and allied networks6.10Case study: integration of a radio gateway
7.1Root cause analysis of failures7.2Validation reports and evidence7.3Management of non-conformities7.4System certification and accreditation7.5In-service monitoring7.6Revalidation after changes7.7Key service indicators7.8Continuous improvement of the test process7.9Documentation for audits7.10Workshop: final validation report
8.1Description of the network under study8.2Requirements and acceptance criteria8.3Detailed test plan8.4Execution of performance tests8.5Resilience and security testing8.6Analysis of results8.7Validation report8.8Improvement recommendations8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online learning on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Wireshark, iPerf3, GNS3, Spirent TestCenter and Keysight IxNetwork, in free, academic or evaluation versions. Practical work is based on real procedures: load and latency testing on a critical network, failover validation and network segmentation audits. Assessment is continuous by module plus the final project.
Standards covered: IEC 62443, ISO/IEC 27001, Directive (EU) 2022/2555 NIS2, ITU-T Y.1564, IETF RFC 2544, ETSI EN 300 392, 3GPP TS 22.179.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Wireshark, iPerf3, GNS3, Spirent TestCenter and Keysight IxNetwork, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Ethics in the Coordination of Autonomous Systems
Online postgraduate diploma of 800 hours in ethics in the coordination of autonomous systems. 8 modules covering multi-agent systems and swarms, responsibility in collective decisions, the…
Diploma in Quality Control in Defence
Online postgraduate diploma of 800 hours in quality control in defence, structured in 8 modules covering quality management systems (ISO 9001:2015, AQAP-2110), government quality assurance (STANAG…
Diploma in Ethical and Legal Military Telemedicine
Online postgraduate diploma of 800 hours in ethical and legal military telemedicine. 8 modules covering telemedicine in military settings, technologies and systems, the healthcare legal framework,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships