Diploma in Psychoacoustics and Sound Branding for Vehicles
Online postgraduate diploma of 800 hours in Psychoacoustics and Sound Branding for Vehicles. 8 modules covering applied psychoacoustics, vehicle acoustics, sound quality evaluation, sound branding, vehicle sound design, technical implementation and noise regulations with ISO 532-1, UN/ECE Regulation No. 51 and UN/ECE Regulation No. 138, with an assigned technical tutor.
Diploma in Psychoacoustics and Sound Branding for Vehicles — studying from New Zealand
Product design and human-machine interface work in New Zealand spans consumer goods, medical devices, agricultural machinery and digital products, with a strong design community in Auckland and Wellington. Design-led companies often export globally, and the country's reputation for innovation in outdoor and sporting equipment supports a steady demand for industrial designers. Professionals may work in-house for manufacturers, in design consultancies, or with research organisations on usability and interface development.
Fees for New Zealand: NZ$2,960 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
Do New Zealand professional bodies regulate design and human-machine interface work?
Design and HMI work is generally not a regulated profession in New Zealand. Engineers in product roles may pursue Engineering New Zealand registration if their work is engineering-based. Industry associations also exist for designers. SEIUM's qualifications are private and not accredited by any national body, so their value is judged by employers.
Where do product and HMI engineers work in New Zealand?
Typical employers include software and hardware product companies, manufacturers, medical device and consumer product firms, and design consultancies. Hiring usually focuses on a strong portfolio and evidence of user-centred work. A private qualification can add to your profile, but it does not guarantee employment or a particular outcome.
Is this workable online with a job, and what language level is needed?
The programmes are fully online and taught in English, so you need solid English for technical reading and writing. No student visa is required to study from New Zealand. You will have an assigned technical tutor and complete a final project. Fees are payable in instalments, employer sponsorship is possible, and specialist courses take 300 hours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply psychoacoustic metrics such as loudness, sharpness and roughness.
Analyse the vehicle's interior and exterior soundscape.
Design and analyse listening tests with juries.
Define sound identities consistent with the brand.
Synthesise propulsion and interface sounds for vehicles.
Implement the sound design within the vehicle's audio architecture.
Reconcile sound branding with noise and AVAS regulations.
Who it's for
- Vehicle sound designers
- Sound quality engineers
- NVH engineers
- Sound branding specialists
- In-vehicle audio engineers
- Psychoacoustics researchers
- Engineering or science graduates looking to move into the automotive sector
What you'll work with
- ISO 532-1:2017 (loudness calculation, Zwicker method)
- UN/ECE Regulation No. 51 (sound level of vehicles)
- UN/ECE Regulation No. 138 (quiet road transport vehicles)
- Regulation (EU) No 540/2014 (sound level of motor vehicles)
- ISO 226:2023 (normal equal-loudness-level contours)
- DIN 45692:2009 (sharpness)
- ISO 362-1:2022 (noise emitted by accelerating road vehicles)
- Directive 2002/49/EC (environmental noise)
- HEAD ArtemiS SUITE
- Simcenter Testlab
- Audiokinetic Wwise
- MATLAB
- Max/MSP
8 modules
1.1Human hearing and anatomy of the ear1.2Hearing thresholds and equal-loudness contours1.3Loudness in phons and sones1.4Temporal and frequency masking1.5Critical bands and the Bark scale1.6Sharpness and roughness1.7Fluctuation strength and tonality1.8Zwicker models1.9Perception of sounds in the vehicle1.10Workshop: Zwicker loudness calculation
2.1Noise sources: engine, rolling and wind2.2Noise in electric vehicles2.3Airborne and structure-borne transmission2.4Interior sound quality2.5Measurement with binaural heads2.6Order analysis and spectrograms2.7On-road recordings2.8Exterior noise standards2.9Vehicle acoustic targets2.10Practical exercise: binaural analysis of an electric vehicle interior
3.1Listening tests with juries3.2Paired comparison and scales3.3Semantic differential scales3.4Correlation between metrics and judgements3.5Binaural playback over headphones3.6Design of listening experiments3.7Statistical analysis of juries3.8Predictive preference models3.9Cultural differences in preference3.10Lab: paired-comparison listening test
4.1Brand sound identity4.2Sound logo and acoustic signature4.3Consistency between product and communication4.4Welcome and farewell sounds4.5Emotion and meaning of sound4.6Sound design of automotive brands4.7Protecting sound as a trade mark4.8Managing the sound palette4.9Brand case studies4.10Case study: sound identity guide for a brand
5.1Sound synthesis: additive, granular and FM5.2Sound design tools5.3Propulsion sound in electric vehicles5.4Active sound design in the cabin5.5Engine sound enhancement5.6Active noise cancellation5.7Sounds as a function of speed and load5.8Integration with the vehicle's loudspeakers5.9Customer acceptance5.10Workshop: speed-dependent synthesised propulsion sound
6.1Vehicle audio architecture6.2Digital signal processors6.3Wwise and FMOD audio middleware6.4Loudspeakers and positioning6.5Cabin equalisation and calibration6.6Latency and synchronisation6.7Priority between system sounds6.8Sound software updates6.9In-vehicle validation6.10Practical exercise: interactive sound project in Wwise
7.1Exterior noise under UN/ECE Regulation No. 517.2Regulation (EU) No 540/2014 on sound level7.3AVAS and UN/ECE Regulation No. 1387.4Noise exposure and health7.5Urban noise pollution7.6Environmental Noise Directive7.7Accessibility for people with disabilities7.8Ethics of sound design7.9Regulatory trends in exterior sound7.10Case study: compatibility between sound branding and AVAS
8.1Brand analysis8.2Psychoacoustic study of the vehicle8.3Sound identity concept8.4Sound design8.5Listening test8.6Implementation in a prototype8.7Regulatory assessment of the design8.8Sound style guide8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is HEAD ArtemiS SUITE, Simcenter Testlab, Audiokinetic Wwise, MATLAB and Max/MSP, in free, academic or evaluation versions. Testing is studied on real procedures: binaural recording and psychoacoustic analysis of interiors, listening tests with juries, and design of propulsion and brand sounds. Assessment is continuous by module, plus the final project.
Standards covered: ISO 532-1:2017, UN/ECE Regulation No. 51, UN/ECE Regulation No. 138, Regulation (EU) No 540/2014, ISO 226:2023, DIN 45692:2009, ISO 362-1:2022, Directive 2002/49/EC.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with HEAD ArtemiS SUITE, Simcenter Testlab, Audiokinetic Wwise, MATLAB and Max/MSP, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Handover, Trust and Explainability in Supervised Driving
Online postgraduate diploma of 800 hours in handover, trust and explainability in supervised driving: 8 modules covering supervised driving and automation levels, handover and takeover, driver…
Diploma in Human Factors Applied to Critical Tasks ISO 15005/15007
Online postgraduate diploma of 800 hours in human factors applied to critical tasks (ISO 15005/15007): 8 modules covering human factors in critical systems, dialogue management to…
Diploma in Pedestrian Standards, Visibility and Wade Requirements
Online postgraduate diploma of 800 hours in pedestrian protection standards, visibility and wading requirements, structured in 8 modules covering pedestrian protection, front-end design, direct and indirect…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships