Diploma in Operational Risk in Energy Infrastructure
Online postgraduate diploma of 800 hours in operational risk in energy infrastructure. 8 modules covering critical energy infrastructure, operational risk frameworks, process risk analysis, asset reliability, resilience and continuity, cyber and physical risk, and risk quantification and transfer, with ISO 31000, Directive (EU) 2022/2557 and Palisade @RISK, with an assigned technical tutor.
Diploma in Operational Risk in Energy Infrastructure — studying from New Zealand
Off-road and special vehicle engineering is a major strength in New Zealand, reflecting the importance of agriculture, forestry, mining and construction. Manufacturers and fabricators in the Waikato and Canterbury produce tractors, harvesters, dairy equipment and specialised machinery, many of which are exported worldwide. Engineers in this field work on design, testing and safety compliance for equipment used on farms, in plantations and on remote worksites.
Fees for New Zealand: NZ$2,160 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
Which New Zealand bodies relate to off-road and specialist vehicle engineering?
Engineering New Zealand is the main professional body, and vehicle compliance is handled by the NZ Transport Agency Waka Kotahi. Heavy machinery and certain specialist vehicles can also fall under WorkSafe New Zealand rules. SEIUM's qualifications are private and not accredited by any national body, so employers and regulators decide their value.
Who hires off-road and special vehicle engineers in New Zealand?
Employers include forestry and agricultural equipment firms, mining and civil construction contractors, fabrication shops, and emergency or utility vehicle fleets. Practical design, safety and maintenance skills are central to hiring. A SEIUM qualification may help, but its weight depends on the employer.
How does the study load work for someone with a job here?
The programme is fully online, so you can study around work from anywhere in New Zealand without a student visa. Specialist courses take 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. You get an assigned technical tutor, and fees can be paid in instalments or sponsored by an employer.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Characterise critical energy infrastructure and its interdependencies.
Implement an operational risk management framework.
Apply process risk analysis techniques.
Manage asset reliability and integrity.
Design resilience and continuity plans.
Integrate cyber and physical risk into the assessment.
Quantify and transfer operational risk.
Who it's for
- Operational risk managers at energy companies.
- Process safety engineers at power, oil and gas facilities.
- Business continuity managers responsible for critical operations.
- Reliability engineers focused on asset integrity and maintenance.
- Critical infrastructure risk analysts in industry or public administration.
- Energy insurance consultants advising on risk transfer.
- Engineering or science graduates looking to move into power generation.
What you'll work with
- ISO 31000 (risk management guidelines)
- Directive (EU) 2022/2557 (resilience of critical entities)
- Spanish Critical Infrastructure Act 8/2011 (protection of critical infrastructure)
- IEC 31010 (risk assessment techniques)
- Royal Decree 840/2015 Seveso III (control of major-accident hazards)
- ISO 55001 (asset management systems)
- IEC 61511 (functional safety in the process industry)
- ISO 22301 (business continuity management systems)
- Palisade @RISK
- BowTieXP
- DNV Phast
- Isograph Reliability Workbench
8 modules
1.1Conventional and renewable power plants1.2Electricity transmission and distribution grids1.3Gas pipelines, LNG plants and storage facilities1.4Refineries and oil terminals1.5Interdependencies between infrastructures1.6Spanish Critical Infrastructure Act 8/20111.7Directive (EU) 2022/2557 on resilience1.8Critical operators and security plans1.9Physical, natural and cyber threats1.10Workshop: interdependency map of an energy hub
2.1ISO 31000 principles2.2IEC 31010 techniques2.3Risk appetite and tolerance2.4Taxonomy of operational events2.5The three lines of defence2.6Risk matrices and their limitations2.7Key risk indicators2.8Loss event register2.9Risk culture2.10Practical exercise: designing a risk taxonomy
3.1HAZOP in energy facilities3.2LOPA analysis3.3Fault trees and event trees3.4Bow-tie analysis3.5Functional safety IEC 615113.6Major accidents and Royal Decree 840/20153.7Quantitative risk analysis3.8Consequence modelling3.9Lessons from historical accidents3.10Case study: bow-tie of a loss of containment
4.1Asset management ISO 550014.2Equipment criticality4.3Reliability-centred maintenance4.4Failure data analysis ISO 142244.5Weibull distributions4.6Risk-based inspection4.7Integrity of pipelines and tanks4.8Asset ageing4.9Turnaround optimisation4.10Lab: criticality analysis of a substation
5.1Business continuity ISO 223015.2Business impact analysis5.3Blackout and cascading failure scenarios5.4Extreme weather events5.5Fuel supply chain5.6Emergency and self-protection plans5.7Exercises and drills5.8Service recovery5.9Communication with regulators5.10Drill: loss of a high-voltage line
6.1NIS2 Directive in the energy sector6.2Security of SCADA systems6.3IEC 62443 in substations6.4Physical protection of facilities6.5Insider threats6.6Convergence of physical and logical security6.7Incident management6.8Cyber risk quantification6.9Cyber insurance6.10Case study: attack scenario on a control centre
7.1Frequency and severity models7.2Monte Carlo simulation with @RISK7.3Operational value at risk7.4Maximum loss scenarios7.5Energy insurance programmes7.6The onshore insurance market7.7Captives and self-insurance7.8Reporting to senior management7.9Investment decisions on mitigation7.10Practical exercise: loss model for a plant
8.1Description of the infrastructure8.2Context and risk criteria8.3Risk identification8.4Analysis of critical scenarios8.5Loss quantification8.6Treatment plan8.7Indicators and monitoring8.8Continuity plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so it can be combined with work.
Each module combines theory, guided reading of the original standards and applied exercises. The working software is Palisade @RISK, BowTieXP, DNV Phast and Isograph Reliability Workbench, in free, academic or evaluation versions. Exercises are based on real procedures: bow-tie analysis of loss-of-containment scenarios, loss quantification through Monte Carlo simulation and continuity drills for blackouts. Assessment is continuous by module, plus the final project.
Standards covered: ISO 31000, Directive (EU) 2022/2557, Spanish Critical Infrastructure Act 8/2011, IEC 31010, Royal Decree 840/2015 (Seveso III), ISO 55001, IEC 61511, ISO 22301.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Palisade @RISK, BowTieXP, DNV Phast and Isograph Reliability Workbench, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Hydrogen Safety and Storage
Online postgraduate diploma of 800 hours in hydrogen safety and storage. 8 modules covering hydrogen properties, storage technologies, materials, risk analysis, ATEX, refuelling stations and hydrogen…
Diploma in DPF and Solid Emissions Control
Online postgraduate diploma of 800 hours in diesel particulate filters (DPF) and solid emissions control. 8 modules covering diesel particulates, filter technology, regeneration, ash and durability,…
Postgraduate Diploma in PEM Fuel Cells for Heavy-Duty Applications
Online 800-hour Postgraduate Diploma in PEM Fuel Cells for Heavy-Duty Applications. 8 modules covering IEC 62282-2-100 (fuel cell modules: safety), UNECE Regulation No. 134 (hydrogen vehicles)…
More in Off-Road, Special Vehicles & Machinery
All Off-Road, Special Vehicles & Machinery programmes → · How to apply · Fees & financing · Scholarships