Diploma in Haptic Actuators and Response Patterns
Online postgraduate diploma of 800 hours in Haptic Actuators and Response Patterns. 8 modules covering haptic perception, actuator technologies, haptic response patterns, in-vehicle haptics, technical integration, user evaluation and design guidelines with ISO 9241-910, ISO 9241-920 and the European Statement of Principles on HMI, with an assigned technical tutor.
Diploma in Haptic Actuators and Response Patterns — studying from New Zealand
Product design and human-machine interface work in New Zealand spans consumer goods, medical devices, agricultural machinery and digital products, with a strong design community in Auckland and Wellington. Design-led companies often export globally, and the country's reputation for innovation in outdoor and sporting equipment supports a steady demand for industrial designers. Professionals may work in-house for manufacturers, in design consultancies, or with research organisations on usability and interface development.
Fees for New Zealand: NZ$2,550 (New Zealand dollar), with instalments and employer sponsorship available.
Relevant bodies in New Zealand
Typical roles
Questions from New Zealand
Do New Zealand professional bodies regulate design and human-machine interface work?
Design and HMI work is generally not a regulated profession in New Zealand. Engineers in product roles may pursue Engineering New Zealand registration if their work is engineering-based. Industry associations also exist for designers. SEIUM's qualifications are private and not accredited by any national body, so their value is judged by employers.
Where do product and HMI engineers work in New Zealand?
Typical employers include software and hardware product companies, manufacturers, medical device and consumer product firms, and design consultancies. Hiring usually focuses on a strong portfolio and evidence of user-centred work. A private qualification can add to your profile, but it does not guarantee employment or a particular outcome.
Is this workable online with a job, and what language level is needed?
The programmes are fully online and taught in English, so you need solid English for technical reading and writing. No student visa is required to study from New Zealand. You will have an assigned technical tutor and complete a final project. Fees are payable in instalments, employer sponsorship is possible, and specialist courses take 300 hours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the fundamentals of human haptic perception.
Select haptic actuators according to response, power consumption and cost.
Design haptic confirmation and alert patterns.
Integrate haptics into controls, steering wheel, pedals and seats.
Resolve the system's mechanical integration and latency.
Evaluate haptic patterns with users.
Specify haptic requirements in line with the regulations.
Who it's for
- Haptics engineers
- Tactile interaction designers
- Cockpit HMI engineers
- Actuator electronics engineers
- Human factors researchers
- Product validation engineers
- Engineering or science graduates looking to move into the automotive sector
What you'll work with
- ISO 9241-910:2011 (framework for tactile and haptic interactions)
- ISO 9241-920:2009 (guidance on tactile and haptic interactions)
- Recommendation 2008/653/EC (European Statement of Principles on HMI)
- ISO 5349-1:2001 (hand-transmitted vibration)
- ISO 15005:2017 (dialogue management)
- UN/ECE Regulation No. 10 (electromagnetic compatibility)
- ISO 9241-940:2017 (evaluation of tactile and haptic interactions)
- MATLAB/Simulink
- Ansys Mechanical
- Arduino and prototyping platforms
- ProtoPie
- LabVIEW
8 modules
1.1Physiology of touch and mechanoreceptors1.2Vibration thresholds by frequency1.3Perception of force and texture1.4Sensitivity by body area1.5Spatial and temporal discrimination1.6Kinaesthesia and proprioception1.7Tactile adaptation and masking1.8Haptic perception while driving1.9Individual differences in tactile sensitivity1.10Workshop: measuring vibration thresholds in the hand
2.1Eccentric rotating mass (ERM) motors2.2Linear resonant actuators (LRA)2.3High-response piezoelectric actuators2.4Electromagnetic voice-coil actuators2.5Electrovibration and electrostatic friction2.6Mid-air ultrasound2.7Force actuators in the steering wheel and pedals2.8Selection by response and power consumption2.9Controllers and drive electronics2.10Practical exercise: characterising an LRA with an accelerometer
3.1Parameters: amplitude, frequency, duration and envelope3.2Tactons and haptic vocabulary3.3Tactile clicks on touchscreens3.4Virtual textures and detents3.5Alert versus confirmation patterns3.6Encoding direction and urgency3.7Rhythm and sequence3.8Haptic effect libraries3.9Design according to background noise3.10Lab: designing a family of tactons
4.1Touch surfaces with feedback4.2Rotary controls with programmable haptics4.3Vibrating steering wheel for lane warnings4.4Active accelerator pedal4.5Seats with vibrotactile alerts4.6Haptics in automated driving4.7Integration with visual and audible alerts4.8Robustness to road vibration4.9Commercial haptics cases4.10Case study: directional alert in the seat
5.1Mechanical mounting and isolation5.2Moving mass and panel response5.3Modal simulation of surfaces5.4End-to-end latency5.5Synchronisation with audio and graphics5.6Power consumption and thermal management5.7Durability and cycle testing5.8Electromagnetic compatibility in the cabin5.9Calibration in production5.10Workshop: modal analysis of a touch panel
6.1Pattern discrimination tests6.2Response times to haptic alerts6.3Pleasantness and perceived quality6.4Simulator evaluation6.5On-road evaluation6.6Distraction metrics6.7Experimental design of tactile studies6.8Statistical analysis of recognition6.9Pattern iteration6.10Practical exercise: tacton recognition study
7.1Tactile and haptic interaction under ISO 9241-9107.2Haptic requirements under ISO 9241-9207.3European Statement of Principles on HMI7.4Exposure to hand-arm vibration7.5Accessibility and haptics7.6Euro NCAP requirements for physical controls7.7Haptic style guides7.8Requirements specification7.9Documentation for suppliers7.10Case study: haptic specification for a centre console
8.1Selection of the application8.2Selection of the actuator8.3Pattern design8.4Mechanical integration of the actuator8.5Functional interface prototype8.6Evaluation with users8.7Final requirements specification8.8Durability tests of the prototype8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, Ansys Mechanical, Arduino and prototyping platforms, ProtoPie and LabVIEW, in free, academic or evaluation versions. Testing is studied on real procedures: characterising actuators with accelerometers, designing and evaluating tacton patterns, and integrating haptics into cockpit surfaces. Assessment is continuous by module, plus the final project.
Standards covered: ISO 9241-910:2011, ISO 9241-920:2009, Recommendation 2008/653/EC, ISO 5349-1:2001, ISO 15005:2017, UN/ECE Regulation No. 10, ISO 9241-940:2017.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB/Simulink, Ansys Mechanical, Arduino and prototyping platforms, ProtoPie and LabVIEW, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in HMI for Extended Operation (Rail/Marine)
Online postgraduate diploma of 800 hours in HMI for prolonged operation in rail and marine: 8 modules covering human factors in long-duration operation, operator vigilance systems,…
Diploma in Track Controls, Ergonomics and Usability
Online postgraduate diploma of 800 hours in racing controls, ergonomics and on-track usability, structured in 8 modules covering steering wheels, pedals, displays, driver seats, track usability…
Diploma in Functional Prototypes and Feedback Loops
Online postgraduate diploma of 800 hours in functional prototypes and feedback loops: 8 modules covering prototyping in product development, rapid manufacturing (ISO/ASTM 52900), electronics and interactive…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships