CourseNaval, Offshore & Sports Nautical Applications open

Course in HSE Risk Management on Ships

Online 300-hour course in HSE risk management on ships. 6 modules covering the ISM Code, MLC 2006 Convention and Helm CONNECT. Dedicated tutor and enrolment open.

Duration300 h
ModeOnline
Start datesSet by the faculty
AwardSEIUM Institute certificate

Course in HSE Risk Management on Ships — studying from New Zealand

Maritime engineering is significant for New Zealand, given its extensive coastline, large exclusive economic zone and a strong sailing and boatbuilding tradition. Auckland, often called the City of Sails, hosts boatbuilders, marine service providers and offshore engineering firms, while Maritime New Zealand regulates safety at sea. Opportunities include naval architecture, offshore energy and aquaculture, and the New Zealand Defence Force's naval fleet supports further demand.

Fees for New Zealand: NZ$1,280 (New Zealand dollar), with instalments and employer sponsorship available.

Relevant bodies in New Zealand

  • Maritime New Zealand (Te Mana Ārai o Aotearoa)
  • Royal New Zealand Navy
  • Yachting New Zealand

Typical roles

  • Naval Architect
  • Marine Engineer
  • Offshore Systems Engineer
  • Boatbuilding Engineer

Questions from New Zealand

Which New Zealand bodies regulate marine and offshore engineering?

Maritime New Zealand regulates maritime safety and the operation of vessels, and Engineering New Zealand is the professional body for engineers. Marine surveying and certain roles require recognised certificates issued by official bodies. SEIUM's qualifications are private and not accredited by any national body, so they do not replace these requirements.

Do marine and offshore employers in New Zealand value private qualifications?

New Zealand has active marine, boatbuilding, port and offshore sectors, particularly in Auckland and the Bay of Plenty. Employers usually prioritise recognised certificates, licences and practical experience. A SEIUM qualification may support an application, but whether it is valued is for each employer to decide.

Can I study this part-time from New Zealand?

Yes. The programme is 100% online and taught in English, so no student visa is needed to study from New Zealand. You are assigned a technical tutor and must complete a final project. Fees are payable in instalments, and employer sponsorship is possible. Programme lengths range from 300 to 1,900 hours.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Understand the HSE approach and safety culture on board ship.

02

Assess task and operational risks using structured methods.

03

Control high-risk work through permits to work.

04

Manage occupational health and crew wellbeing.

05

Integrate pollution prevention into day-to-day management.

06

Measure HSE performance using proactive and reactive indicators.

07

Design an HSE risk management plan for a ship.

Profile

Who it's for

  • Fleet HSE superintendent looking to specialise in HSE Risk Management on Ships.
  • Shipboard safety officer looking to specialise in HSE Risk Management on Ships.
  • Maritime prevention technician looking to specialise in HSE Risk Management on Ships.
  • Designated person ashore looking to specialise in HSE Risk Management on Ships.
  • HSE auditor looking to specialise in HSE Risk Management on Ships.
  • Shipping company quality manager looking to specialise in HSE Risk Management on Ships.
  • Engineering or science graduates looking to enter shipping companies.
Standards & tools

What you'll work with

  • ISM Code
  • MLC 2006 Convention
  • ISO 45001:2018
  • OCIMF TMSA 3
  • FSA Guidelines (MSC-MEPC.2/Circ.12)
  • IMO Resolution A.1050(27) on entry into enclosed spaces
  • STCW Convention
  • ISO 14001:2015
Syllabus

6 modules · 300 h

  1. 1.1The HSE approach in the maritime industry
  2. 1.2Typical hazards on board
  3. 1.3Safety culture and leadership
  4. 1.4ISM Code and the management system
  5. 1.5MLC Convention and occupational health
  6. 1.6Vetting and TMSA requirements
  7. 1.7Responsibilities of the master and officers
  8. 1.8Proactive and reactive indicators
  9. 1.9Accident statistics in the merchant navy
  10. 1.10Case study: diagnosing safety culture on a ship
  1. 2.1Formal Safety Assessment (FSA)
  2. 2.2Task risk assessment
  3. 2.3Risk matrices on board
  4. 2.4HAZID for cargo operations
  5. 2.5Job Safety Analysis (JSA)
  6. 2.6Management of change
  7. 2.7Human factors and ergonomics
  8. 2.8Fatigue and rest hours
  9. 2.9Psychosocial risks on board
  10. 2.10Workshop: risk assessment of work at height
  1. 3.1Permit-to-work system
  2. 3.2Entry into enclosed spaces
  3. 3.3Hot work
  4. 3.4Energy isolation and lock-out
  5. 3.5Work at height and over the side
  6. 3.6Mooring operations
  7. 3.7Lifting and handling of loads
  8. 3.8Electrical work on board
  9. 3.9Personal protective equipment
  10. 3.10Practical: entry permit for a ballast tank
  1. 4.1Exposure to noise and vibration
  2. 4.2Chemicals on board
  3. 4.3Air quality and ventilation
  4. 4.4Medical care on board
  5. 4.5Food hygiene and drinking water
  6. 4.6Crew wellbeing
  7. 4.7Pollution prevention
  8. 4.8Waste management
  9. 4.9Operational energy efficiency
  10. 4.10Case study: chemical exposure in the engine room
  1. 5.1Reporting incidents and near misses
  2. 5.2Root cause investigation
  3. 5.3Safety observations
  4. 5.4Internal HSE audits
  5. 5.5SIRE 2.0 vetting inspections
  6. 5.6Management review
  7. 5.7Training and competence
  8. 5.8Safety campaigns
  9. 5.9Fleet benchmarking
  10. 5.10Practical: near-miss trends
  1. 6.1Study vessel
  2. 6.2Initial HSE diagnosis
  3. 6.3Risk register
  4. 6.4Critical operations procedures
  5. 6.5Training plan
  6. 6.6Vessel HSE indicators
  7. 6.7Audit programme
  8. 6.8Improvement plan
  9. 6.9Report and presentation
  10. 6.10Final review with the tutor
Methodology, software & labs

How you'll learn

100 % online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake, making it possible to combine with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is Helm CONNECT, DNV Synergi Life, Intelex, SafetyCulture, in free, academic or evaluation versions. Case studies are based on real risk assessment procedures for high-risk shipboard work, fleet incident trend analysis and preparation for vetting inspections. Assessment is continuous, module by module, plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with a rotor test rig, EMC/Lightning pre-compliance, HIL/SIL, vibration/acoustics.
Evidence-driven final project:safety case, test plan, compliance dossier and operational limits.
Industry mentoring:teaching staff with experience in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:a safety-by-design approach, with OT cyber security, DIH and compliance as its pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Study vessel

Understand the HSE approach and safety culture on board ship.

Initial HSE diagnosis

Assess task and operational risks using structured methods.

Risk register

Control high-risk work through permits to work.

Critical operations procedures

Manage occupational health and crew wellbeing.

Training plan

Integrate pollution prevention into day-to-day management.

Career opportunities

Where this takes you

Fleet HSE SuperintendentShipboard Safety OfficerMaritime Prevention TechnicianDesignated Person AshoreHSE AuditorShipping Company Quality Manager
Admissions & scholarships

Requirements

  • No prior qualification is required.
  • Internet connection and a computer capable of running the programme software.
  • Sufficient command of Spanish to follow technical regulatory texts.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme comprises 300 hours in total, spread over 3 to 5 months. That averages between 10 and 15 hours per week, compatible with a full-time job.

You will work with Helm CONNECT, DNV Synergi Life, Intelex, SafetyCulture. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.

SEIUM's own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.

Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the credit transfer policy when you enrol.

Course in HSE Risk Management on ShipsEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.