Postgraduate Diploma in Critical Infrastructure Continuity
Online 800-hour Postgraduate Diploma in Critical Infrastructure Continuity. 8 modules covering Directive (EU) 2022/2557 (resilience of critical entities), Directive (EU) 2022/2555 (NIS2) and QGIS. Assigned tutor and open enrolment.
Postgraduate Diploma in Critical Infrastructure Continuity — studying from Malta
Malta's healthcare system relies on public hospitals alongside a growing private sector, creating demand for engineers in medical devices, clinical technology and facilities. The Medicines Authority and the Health Directorate set regulatory expectations that shape work on medical equipment. Biomechanics and wearable technology are emerging interests, particularly in rehabilitation, sports science and occupational safety. Professionals in this area often collaborate with clinicians, distributors and regulators to ensure devices meet national and European requirements.
Fees for Malta: €1,490 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Is this programme recognised by a professional body in Malta for engineers working in health, biomechanics or wearables?
SEIUM Institute's qualifications are its own private qualifications. They are not official Maltese state degrees and are not accredited by any national body. In Malta, engineering titles are regulated through the Malta Council for Professions and the Chamber of Engineers, and medical devices fall under the Medicines Authority. Recognition of a private qualification is decided by employers or the relevant body, so check with them before enrolling.
Will employers in Malta value this training for roles in wearables or operational safety?
Employers in Malta's health technology, manufacturing and safety-related sectors decide for themselves how much weight to give a private online qualification. Many weigh practical experience and a final project heavily. SEIUM's programmes include a final project, but whether it helps your career in Malta depends on your employer's view. Speaking with prospective employers beforehand is the most reliable way to find out.
Can I study this alongside a full-time job in Malta, and is employer funding possible?
The programmes are 100% online and taught in English, so you can study from home without a student visa. Master's programmes are 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, so plan your weekly time accordingly. Fees are payable in instalments, and employer sponsorship is possible. Each student gets an assigned technical tutor for support.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the concept of resilience as applied to critical infrastructure.
Analyse risks and interdependencies between essential sectors.
Design electrical systems with redundancy and recovery capacity.
Evaluate the continuity of water, telecommunications and transport services.
Apply IEC 62443 to the protection of industrial control systems.
Integrate physical protection and operational security.
Develop a continuity plan in accordance with ISO 22301.
Who it's for
- Business continuity manager looking to specialise in Critical Infrastructure Continuity.
- Critical infrastructure risk analyst looking to specialise in Critical Infrastructure Continuity.
- Electrical systems resilience engineer looking to specialise in Critical Infrastructure Continuity.
- Industrial cybersecurity specialist looking to specialise in Critical Infrastructure Continuity.
- Integrated security manager looking to specialise in Critical Infrastructure Continuity.
- Emergency manager looking to specialise in Critical Infrastructure Continuity.
- Engineering or science graduates looking to enter the energy sector.
What you'll work with
- Directive (EU) 2022/2557 (resilience of critical entities)
- Directive (EU) 2022/2555 (NIS2)
- Law 8/2011 (protection of critical infrastructure)
- ISO 22301 (business continuity management)
- IEC 62443 (cybersecurity of industrial automation and control systems)
- ISO 31000 (risk management)
- Royal Decree 704/2011 (Regulation on the protection of critical infrastructure)
8 modules · 800 h
1.1Definition and strategic sectors1.2Law 8/2011 on the protection of critical infrastructure1.3CER Directive 2022/25571.4NIS2 Directive for essential operators1.5Interdependencies between sectors1.6Cascading effects1.7Resilience: absorption, adaptation and recovery1.8Role of the CNPIC1.9Operator security plans1.10Case study: blackout and cascading effects
2.1Analysis of natural and human-made threats2.2Modelling infrastructure networks2.3Vulnerability analysis2.4Interdependency simulation2.5Resilience metrics2.6Climate risks2.7Extreme scenario analysis2.8Analysis tools2.9Asset prioritisation2.10Workshop: interdependency map of a city
3.1Structure of the electrical system3.2N-1 redundancy3.3Black start autonomous startup3.4Microgrids and islanded operation3.5Backup generation3.6Substation protection3.7Demand management during crises3.8Service restoration3.9Lessons from major blackouts3.10Practical exercise: sizing backup power for a hospital
4.1Continuity of water supply4.2Security of wastewater treatment and water purification plants4.3Redundancy in telecommunications networks4.4Data centres and Tier levels4.5Transport continuity4.6Ports and airports4.7Fuel logistics chain4.8Coordination between operators4.9Sector-specific plans4.10Case study: data centre continuity
5.1OT, SCADA and ICS systems5.2IEC 62443 and security levels5.3Network segmentation5.4OT anomaly monitoring5.5Patch management in industrial environments5.6OT incident response5.7Historical attacks on infrastructure5.8Recovery of control systems5.9Coordination with CERT5.10Laboratory: segmented architecture for a plant
6.1Perimeter security and access control6.2Protection against natural hazards6.3Physical redundancy and geographic diversity6.4Predictive maintenance6.5Critical spare parts management6.6Key personnel and crisis shifts6.7Supply chain security6.8Inspections and audits6.9Contractor management6.10Practical exercise: critical spare parts analysis
7.1Emergency and self-protection plans7.2Coordination with civil protection7.3Crisis control centres7.4Communication with authorities7.5Cross-sector exercises7.6Management of scarce resources7.7Public information7.8Recovery and reconstruction7.9Lessons learned7.10Case study: cross-sector flood exercise
8.1Selection of the infrastructure8.2Risk analysis8.3Interdependency map8.4Physical resilience measures8.5Cybersecurity measures8.6Continuity plan8.7Exercise programme8.8Indicators8.9Report and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, making it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is QGIS, DIgSILENT PowerFactory, EPANET, Python (NetworkX), MATLAB, in free, academic or evaluation versions. Case studies cover real procedures for analysing interdependencies between infrastructures, crisis simulation exercises and business continuity audits. Assessment is continuous by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the concept of resilience as applied to critical infrastructure.
Analyse risks and interdependencies between essential sectors.
Design electrical systems with redundancy and recovery capacity.
Evaluate the continuity of water, telecommunications and transport services.
Apply IEC 62443 to the protection of industrial control systems.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme consists of 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with QGIS, DIgSILENT PowerFactory, EPANET, Python (NetworkX), MATLAB. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in ISO 14971 Risk Management and Regulated Usability
Online 800-hour Postgraduate Diploma in ISO 14971 Risk Management and Regulated Usability. 8 modules covering ISO 14971 (risk management for medical devices), IEC 62366-1 (usability engineering)…
Postgraduate Diploma in Hardware Configuration and Traceability Management
Online 800-hour Postgraduate Diploma in Hardware Configuration and Traceability Management. 8 modules with ISO 10007 (configuration management), EIA-649 (configuration management standard) and Siemens Teamcenter. Dedicated tutor…
Postgraduate Diploma in Ergonomic Health Surveillance and Plant KPIs
Online 800-hour Postgraduate Diploma in Ergonomic Health Surveillance and Plant KPIs. 8 modules covering Law 31/1995 on Occupational Risk Prevention (art. 22), Royal Decree 843/2011 (healthcare…
More in Health, Biomechanics, Wearables & Operational Safety
All Health, Biomechanics, Wearables & Operational Safety programmes → · How to apply · Fees & financing · Scholarships