IEEE Standards for Low-Latency Links Course
Online 300-hour course in IEEE standards for low-latency links. 6 modules covering IEEE 802.1Qbv (time-aware traffic scheduling), IEEE 802.1AS (gPTP synchronisation) and Wireshark. Assigned tutor and open enrolment.
IEEE Standards for Low-Latency Links Course — studying from Malta
Malta's defence sector is comparatively small, reflecting the country's neutrality and modest armed forces. Activity centres on the Armed Forces of Malta, maritime surveillance, border security and the associated technical support. Engineering roles are mostly found in equipment maintenance, communications, infrastructure and government procurement rather than large-scale defence manufacturing. Professionals may find opportunities through public service and contractors supplying the armed forces and related agencies, where reliability and compliance with national procurement rules are important.
Fees for Malta: €743 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Which bodies regulate defence and military engineering work in Malta?
Malta's Armed Forces and the Ministry responsible for defence oversee military engineering and procurement. General engineering practice is regulated by the Chamber of Engineers (KSU) under the Engineering Profession Act. Export and dual-use controls follow EU and national rules. A SEIUM qualification is private and not accredited, so any recognition depends on employers or the relevant authority.
What career paths exist in Malta for land systems and defence engineering?
Opportunities in Malta are limited and mostly within government, the Armed Forces and their suppliers, with more substantial defence industry work typically found abroad. Many roles require security clearance and specific experience. A private qualification can support your profile, but you should expect employers to focus on experience and clearance eligibility.
How do I study this from Malta, and what should I consider about workload and funding?
The programme is delivered fully online in English, with an assigned technical tutor and a final project. You do not need a visa to study from home in Malta. Durations range from 300 to 1,900 hours, so plan time alongside any work commitments. Ask about instalment payments and whether employer sponsorship is available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the sources of latency in a communications network.
Configure TSN mechanisms for deterministic traffic.
Apply clock synchronisation using IEEE 1588 and IEEE 802.1AS.
Analyse the performance of low-latency wireless links.
Dimension networks for real-time applications.
Measure and verify latency and jitter against a service level agreement.
Design a complete, verified low-latency link.
Who it's for
- Real-time network engineer wishing to specialise in IEEE Standards for Low-Latency Links.
- Telecommunications engineer wishing to specialise in IEEE Standards for Low-Latency Links.
- Industrial network architect wishing to specialise in IEEE Standards for Low-Latency Links.
- Embedded systems engineer wishing to specialise in IEEE Standards for Low-Latency Links.
- Network test engineer wishing to specialise in IEEE Standards for Low-Latency Links.
- Quality of service specialist wishing to specialise in IEEE Standards for Low-Latency Links.
- Engineering or science graduates seeking to enter the telecommunications sector.
What you'll work with
- IEEE 802.1Qbv (time-aware traffic scheduling)
- IEEE 802.1AS (gPTP synchronisation)
- IEEE 1588-2019 (PTP)
- IEEE 802.1CB (frame replication and elimination)
- IEEE 802.3br (frame preemption)
- IETF RFC 8655 (DetNet architecture)
- 3GPP TS 22.104 (cyber-physical control communications)
- ITU-T Y.1541 (quality of service objectives)
6 modules · 300 h
1.1Components of end-to-end latency1.2Propagation, transmission and processing latency1.3Queuing and its dominant effect1.4Delay variation and how it is measured1.5Packet loss and reordering1.6Delay-sensitive applications1.7Typical requirements by application1.8Vocabulary and metrics in the field1.9Latency measurement tools1.10Exercise: breaking down the latency of a link
2.1Switching and its contribution to delay2.2Quality of service and traffic classification2.3Queues, priorities and schedulers2.4Traffic shaping and policing2.5Congestion control and active queue management2.6Deterministic networks and resource reservation2.7Precision synchronisation and its use2.8Time-sensitive networks and their standards2.9Lossless design and flow control2.10Practice: configuring quality of service on a network
3.1Latency in local wireless networks3.2Medium access and contention3.3Low-latency mechanisms in recent amendments3.4Mobile networks and radio access latency3.5Edge computing and its effect3.6Satellite links and delay by orbit3.7Microwave and fibre links: a comparison3.8Redundant paths and fast switchover3.9Trade-off between reliability and delay3.10Practice: comparing three technologies for an application
4.1Interactive voice and video4.2Industrial control and closed loops4.3Remote operation and telepresence4.4Augmented and virtual reality4.5Synchronisation of distributed sensors4.6Timestamps and a common time reference4.7Real-time transport protocols4.8Delay compensation and buffering4.9Controlled service degradation4.10Practice: dimensioning the network for a control application
5.1Active and passive measurement methodologies5.2One-way and round-trip delay measurement5.3Percentiles versus averages5.4Continuous monitoring and alerts5.5Diagnosing the cause of a latency increase5.6Service level agreements and how to draft them5.7Verifying compliance5.8Reports and dashboards5.9Link acceptance testing5.10Practice: defining and verifying a service agreement
6.1Choosing the application and its requirements6.2Latency budget analysis6.3Network and quality of service design6.4Selecting access technologies6.5Time synchronisation design6.6Measurement and monitoring plan6.7Proposed service level agreement6.8Acceptance test plan6.9Technical report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it compatible with working life.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Wireshark, OMNeT++ (INET), iPerf3, ns-3, in free, academic or evaluation versions. Tests are studied using real TSN latency measurement procedures, a PTP synchronisation bench and real-time network simulation. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the sources of latency in a communications network.
Configure TSN mechanisms for deterministic traffic.
Apply clock synchronisation using IEEE 1588 and IEEE 802.1AS.
Analyse the performance of low-latency wireless links.
Dimension networks for real-time applications.
Where this takes you
Requirements
- No prior degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course works with Wireshark, OMNeT++ (INET), iPerf3 and ns-3. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An in-house SEIUM diploma upon passing the continuous assessment and the integrative project. This is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the advanced programme. Please check the credit transfer policy when you enrol.
Related programmes
Fundamentals of Cybersecurity in Defence Course
Online 300-hour course in fundamentals of cybersecurity in defence. 6 modules covering the Esquema Nacional de Seguridad (Royal Decree 311/2022), ISO/IEC 27001 (information security) and Wireshark.…
Course on Export Regulations for Armoured Vehicles
Online course of 300 hours on export regulations for armoured vehicles. 6 modules covering Common Position 2008/944/CFSP (export of military technology and equipment), the Arms Trade…
ITU Regulations Course in Military Satellite Communications
Online 300-hour course in ITU regulations for military satellite communications. 6 modules covering the ITU Radio Regulations, Recommendation ITU-R S.465 (radiation pattern of earth station antennas)…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships