Diploma in Quality Control in Defence
Online postgraduate diploma of 800 hours in quality control in defence, structured in 8 modules covering quality management systems (ISO 9001:2015, AQAP-2110), government quality assurance (STANAG 4107), quality tools, life-cycle quality, supply chain management, inspection and testing, and non-conformities and improvement, with an assigned technical tutor.
Diploma in Quality Control in Defence — studying from Malta
Malta's defence sector is comparatively small, reflecting the country's neutrality and modest armed forces. Activity centres on the Armed Forces of Malta, maritime surveillance, border security and the associated technical support. Engineering roles are mostly found in equipment maintenance, communications, infrastructure and government procurement rather than large-scale defence manufacturing. Professionals may find opportunities through public service and contractors supplying the armed forces and related agencies, where reliability and compliance with national procurement rules are important.
Fees for Malta: €895 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Which bodies regulate defence and military engineering work in Malta?
Malta's Armed Forces and the Ministry responsible for defence oversee military engineering and procurement. General engineering practice is regulated by the Chamber of Engineers (KSU) under the Engineering Profession Act. Export and dual-use controls follow EU and national rules. A SEIUM qualification is private and not accredited, so any recognition depends on employers or the relevant authority.
What career paths exist in Malta for land systems and defence engineering?
Opportunities in Malta are limited and mostly within government, the Armed Forces and their suppliers, with more substantial defence industry work typically found abroad. Many roles require security clearance and specific experience. A private qualification can support your profile, but you should expect employers to focus on experience and clearance eligibility.
How do I study this from Malta, and what should I consider about workload and funding?
The programme is delivered fully online in English, with an assigned technical tutor and a final project. You do not need a visa to study from home in Malta. Durations range from 300 to 1,900 hours, so plan time alongside any work commitments. Ask about instalment payments and whether employer sponsorship is available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Implement management systems in line with ISO 9001, AQAP-2110 and AS9100.
Understand government quality assurance under STANAG 4107.
Apply statistical quality tools.
Prepare quality plans throughout the life cycle.
Manage quality in the supply chain.
Design inspection and sampling plans.
Resolve non-conformities through root cause analysis.
Who it's for
- Quality engineers in the defence industry.
- Management system auditors.
- Government quality assurance inspectors.
- Supplier quality managers.
- Metrology technicians.
- Continuous improvement managers.
- Engineering or science graduates looking to enter the defence industry.
What you'll work with
- AQAP-2110 (NATO quality assurance requirements for design, development and production)
- ISO 9001:2015 (quality management systems)
- STANAG 4107 (mutual acceptance of government quality assurance)
- AQAP-2070 (NATO mutual government quality assurance process)
- AQAP-2105 (NATO requirements for deliverable quality plans)
- AS9100D (aerospace quality management system)
- AS9102 (aerospace first article inspection)
- ISO 2859-1 (sampling procedures for inspection by attributes)
- Minitab
- SAP QM
- ETQ Reliance
- Q-Pulse
8 modules
1.1The ISO 9001:2015 standard1.2AQAP-2110 requirements1.3The AS9100D standard1.4PECAL publications1.5The process approach1.6Risk-based thinking1.7Interested parties1.8Documented information1.9System audit1.10Practical exercise: process map for a supplier
2.1The GQA concept2.2STANAG 41072.3The AQAP-2070 publication2.4National quality authority2.5Mutual recognition between nations2.6Quality assurance delegations2.7Assurance plans2.8Contractor oversight2.9Certificates of conformity2.10Case study: government quality assurance plan
3.1The seven basic tools3.2Statistical process control3.3Capability indices Cp and Cpk3.4Measurement system analysis3.5Design of experiments3.6The 8D methodology3.7FMEA to AIAG-VDA3.8Six Sigma3.9Lean manufacturing3.10Laboratory: gauge R&R study with Minitab
4.1Contractual requirements4.2AQAP-2105 quality plans4.3Quality in design4.4Verification and validation4.5AS9102 first article inspection4.6Production part approval4.7Configuration management4.8AQAP-2210 software quality4.9Delivery and acceptance4.10Workshop: quality plan to AQAP-2105
5.1Supplier evaluation5.2Second-party audits5.3Flow-down of requirements5.4Counterfeit parts under AS55535.5Counterfeit prevention under AS61745.6Component obsolescence5.7Traceability5.8Supplier indicators5.9Supplier development5.10Case study: prevention of counterfeit components
6.1Inspection plans6.2Sampling to ISO 2859-16.3Dimensional metrology6.4Non-destructive testing6.5Acceptance tests6.6Equipment calibration6.7Quality records6.8Certificates of conformity6.9Product release6.10Practical exercise: sampling plan by attributes
7.1Non-conformity management7.2Material review board7.3Concessions and deviations7.4Corrective actions7.5Root cause analysis7.6Cost of poor quality7.7Key indicators7.8Management review7.9Continuous improvement7.10Case study: 8D report on a non-conformity
8.1Description of the product and the company8.2Contractual and AQAP requirements8.3Process map8.4Quality plan8.5Supplier control8.6Inspection plan8.7Non-conformity management8.8Indicators and audits8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme can be combined with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Minitab, SAP QM, ETQ Reliance and Q-Pulse, in free, academic or evaluation versions. Practical work is based on real procedures for supplier audits, first article inspection and process capability studies. Assessment is continuous by module, plus the final project.
Standards covered: AQAP-2110, ISO 9001:2015, STANAG 4107, AQAP-2070, AQAP-2105, AS9100D, AS9102, ISO 2859-1.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Minitab, SAP QM, ETQ Reliance and Q-Pulse, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Post-Irradiation Examination (PIE)
Online postgraduate diploma of 800 hours in post-irradiation examination (PIE): 8 modules covering hot cell facilities, non-destructive and destructive examinations, fission gas analysis, in-cell mechanical testing,…
Diploma in Validation of Critical Communication Networks
Online postgraduate diploma of 800 hours in validation of critical communication networks. 8 modules covering critical network architecture, requirements engineering and test plans, performance testing, resilience…
Diploma in Nuclear Safety Organisational Culture
Online postgraduate diploma of 800 hours in nuclear safety organisational culture, structured in 8 modules covering the safety culture concept, leadership and management, human and organisational…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships