Diploma in MIL-STD-810: Vibration and Extreme Climate
Online postgraduate diploma of 800 hours in MIL-STD-810 vibration and extreme climate testing. 8 modules covering environmental engineering of equipment, vibration, shock and drop, temperature and humidity, other natural environments, combined testing and analysis, and test management and quality, with an assigned technical tutor.
Diploma in MIL-STD-810: Vibration and Extreme Climate — studying from Malta
Malta's defence sector is comparatively small, reflecting the country's neutrality and modest armed forces. Activity centres on the Armed Forces of Malta, maritime surveillance, border security and the associated technical support. Engineering roles are mostly found in equipment maintenance, communications, infrastructure and government procurement rather than large-scale defence manufacturing. Professionals may find opportunities through public service and contractors supplying the armed forces and related agencies, where reliability and compliance with national procurement rules are important.
Fees for Malta: €1,490 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Which bodies regulate defence and military engineering work in Malta?
Malta's Armed Forces and the Ministry responsible for defence oversee military engineering and procurement. General engineering practice is regulated by the Chamber of Engineers (KSU) under the Engineering Profession Act. Export and dual-use controls follow EU and national rules. A SEIUM qualification is private and not accredited, so any recognition depends on employers or the relevant authority.
What career paths exist in Malta for land systems and defence engineering?
Opportunities in Malta are limited and mostly within government, the Armed Forces and their suppliers, with more substantial defence industry work typically found abroad. Many roles require security clearance and specific experience. A private qualification can support your profile, but you should expect employers to focus on experience and clearance eligibility.
How do I study this from Malta, and what should I consider about workload and funding?
The programme is delivered fully online in English, with an assigned technical tutor and a final project. You do not need a visa to study from home in Malta. Durations range from 300 to 1,900 hours, so plan time alongside any work commitments. Ask about instalment payments and whether employer sponsorship is available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply the MIL-STD-810H tailoring philosophy.
Design and run vibration tests.
Plan shock and drop tests.
Carry out temperature and humidity tests.
Assess other extreme natural environments.
Correlate tests with simulation.
Manage test programmes to ISO/IEC 17025 quality requirements.
Who it's for
- Environmental test engineers.
- Structural dynamics engineers.
- Test laboratory technicians.
- Qualification engineers.
- Mechanical design engineers who need ruggedised equipment.
- Test quality managers.
- Engineering or science graduates looking to move into defence.
What you'll work with
- MIL-STD-810H (environmental engineering considerations and laboratory tests)
- MIL-DTL-901E (shock tests for shipboard equipment)
- DO-160G (environmental conditions for airborne equipment)
- AECTP-400 (NATO mechanical environmental tests)
- IEC 60068-2-64 (random vibration)
- ISO/IEC 17025 (competence of testing laboratories)
- AECTP-300 (NATO climatic environmental tests)
- Ansys Mechanical
- Siemens Simcenter Testlab
- MATLAB
- Femap
- nCode DesignLife
8 modules
1.1The MIL-STD-810H philosophy1.2Tailoring to the life cycle1.3Life-cycle environmental profile1.4Environmental management plan1.5Natural and induced environments1.6Parts 1, 2 and 3 of the standard1.7Relationship with other standards1.8Organising a test programme1.9Common mistakes1.10Case study: environmental profile of a portable unit
2.1Fundamentals of structural dynamics2.2Power spectral density2.3Method 514.82.4Vibration profiles by platform2.5Random and sinusoidal vibration2.6Resonance tests2.7Fixtures and tooling2.8Shaker control2.9Vibration fatigue2.10Lab: random vibration test
3.1Method 516.83.2Shock response spectrum3.3Half-sine and sawtooth pulses3.4Transport shock3.5Drop tests3.6Pyroshock3.7Gunfire shock and its simulation3.8Shipboard tests to MIL-DTL-901E3.9Damage analysis3.10Practical exercise: calculation of a shock response spectrum
4.1Method 501.7 high temperature4.2Method 502.7 low temperature4.3Method 503.7 temperature shock4.4Method 507.6 humidity4.5Diurnal cycles4.6Solar radiation, method 505.74.7Condensation4.8Climatic chambers4.9Performance criteria4.10Lab: climatic cycle in a chamber
5.1Low pressure and altitude5.2Rain and watertightness5.3Immersion5.4Sand and dust5.5Salt fog5.6Fungus5.7Icing5.8Explosive atmospheres5.9Fluid contamination5.10Practical exercise: rain and immersion test plan
6.1Combined temperature and vibration tests6.2Test sequence6.3HALT and HASS accelerated testing6.4Numerical vibration simulation6.5Finite element analysis6.6Test-simulation correlation6.7Instrumentation and accelerometers6.8Uncertainty6.9Test reports6.10Lab: finite element modal analysis
7.1ISO/IEC 17025 laboratory accreditation7.2Test plan7.3Detailed procedures7.4Customer witnesses7.5Non-conformances7.6Laboratory safety7.7Costs and schedules7.8COTS equipment in military environments7.9Lessons learned7.10Case study: qualification of a COTS unit
8.1Defining the equipment8.2Environmental profile8.3Method selection8.4Tailoring of levels8.5Test sequence8.6Prior analysis by simulation8.7Test plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys Mechanical, Siemens Simcenter Testlab, MATLAB, Femap and nCode DesignLife, in free, academic or evaluation versions. Practical work is based on real procedures for random vibration tests, climatic chamber cycles and finite element modal analysis. Assessment is continuous by module plus the final project.
Standards covered: MIL-STD-810H, MIL-DTL-901E, DO-160G, AECTP-400, IEC 60068-2-64, ISO/IEC 17025, AECTP-300.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys Mechanical, Siemens Simcenter Testlab, MATLAB, Femap and nCode DesignLife, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Ethics in Critical PNT Applications
Online postgraduate diploma of 800 hours in ethics in critical PNT applications. 8 modules covering societal dependence on PNT, ethics of critical infrastructure, privacy and location,…
Diploma in Ultra-Lightweight Ballistic Ceramics and Materials
Online postgraduate diploma of 800 hours in ultra-lightweight ballistic ceramics and materials, structured in 8 modules covering technical protection ceramics, ceramic processing, microstructure and properties (ASTM…
Diploma in Power Systems Integration for Weapons and Sensors
600-hour online postgraduate diploma in power integration for mission loads: requirements and interfaces, MIL-STD-1275E, MIL-STD-882E, EMC, qualification, configuration and ethics, with an assigned technical tutor.
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships