Diploma in Human-Machine Interfaces on the Ship’s Bridge
Online postgraduate diploma of 800 hours in human-machine interfaces on the ship's bridge. 8 modules covering the bridge, maritime human factors, display systems, interface design, automation and autonomy, evaluation and validation, and regulations, cybersecurity and ethics, with an assigned technical tutor.
Diploma in Human-Machine Interfaces on the Ship’s Bridge — studying from Malta
Malta's defence sector is comparatively small, reflecting the country's neutrality and modest armed forces. Activity centres on the Armed Forces of Malta, maritime surveillance, border security and the associated technical support. Engineering roles are mostly found in equipment maintenance, communications, infrastructure and government procurement rather than large-scale defence manufacturing. Professionals may find opportunities through public service and contractors supplying the armed forces and related agencies, where reliability and compliance with national procurement rules are important.
Fees for Malta: €895 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Which bodies regulate defence and military engineering work in Malta?
Malta's Armed Forces and the Ministry responsible for defence oversee military engineering and procurement. General engineering practice is regulated by the Chamber of Engineers (KSU) under the Engineering Profession Act. Export and dual-use controls follow EU and national rules. A SEIUM qualification is private and not accredited, so any recognition depends on employers or the relevant authority.
What career paths exist in Malta for land systems and defence engineering?
Opportunities in Malta are limited and mostly within government, the Armed Forces and their suppliers, with more substantial defence industry work typically found abroad. Many roles require security clearance and specific experience. A private qualification can support your profile, but you should expect employers to focus on experience and clearance eligibility.
How do I study this from Malta, and what should I consider about workload and funding?
The programme is delivered fully online in English, with an assigned technical tutor and a final project. You do not need a visa to study from home in Malta. Durations range from 300 to 1,900 hours, so plan time alongside any work commitments. Ask about instalment payments and whether employer sponsorship is available.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the architecture of integrated bridges.
Apply human factors to bridge work.
Configure navigation display systems.
Design interfaces in line with IMO guidelines.
Evaluate automation and remote control.
Validate interfaces in simulators with crews.
Apply regulations, cybersecurity and ethical criteria.
Who it's for
- Maritime interface designers.
- Human factors specialists.
- Navigation systems engineers.
- Bridge officers with an interest in equipment design.
- Maritime safety consultants.
- Simulator instructors.
- Engineering or science graduates looking to move into the naval sector.
What you'll work with
- IEC 62288 (presentation of navigation information)
- IEC 61924-2 (integrated navigation systems)
- SOLAS Convention, Chapter V (safety of navigation)
- IMO Resolution MSC.252(83) (integrated navigation systems)
- IMO Resolution MSC.302(87) (bridge alert management)
- STCW Convention (training and watchkeeping)
- IMO S-Mode Guidelines MSC.1/Circ.1609 (standardised navigation display modes)
- Kongsberg K-Sim
- Wärtsilä NTPRO
- Figma
- Tobii Pro Lab
- OpenCPN
8 modules
1.1Evolution of the ship's bridge1.2Integrated bridge system (IBS)1.3Integrated navigation system (INS)1.4Navigation and steering functions1.5Combat information centre1.6Bridges on merchant and naval vessels1.7Reduced crews1.8Accidents and human factors1.9IMO regulations1.10Case study: analysis of the USS Fitzgerald collision
2.1Bridge ergonomics2.2Workload of the officer of the watch2.3Fatigue and watch rotations2.4Situational awareness2.5Bridge resource management2.6Communication and coordination2.7Decision-making2.8STCW training2.9Safety culture2.10Workshop: watchkeeping workload analysis
3.1ECDIS and electronic charts3.2Radar and ARPA3.3AIS3.4Multifunction displays3.5Bridge alert management systems (BAMS)3.6Presentation of platform information3.7Ship guidance3.8Meteorological sensors3.9Camera integration3.10Practical exercise: configuring ECDIS layers
4.1User-centred design4.2IMO S-Mode design guidelines4.3Symbology and colours4.4Night vision and dimming4.5Physical knobs and controls4.6Touchscreens at sea4.7Information architecture4.8Rapid prototyping4.9Accessibility4.10Lab: prototype of a navigation display
5.1Autopilots and steering5.2Automated collision avoidance5.3COLREGs and algorithms5.4Autonomous and remotely controlled ships5.5Shore-based control centres5.6Control transitions5.7Trust in automation5.8IMO MASS Code5.9The master's responsibility5.10Case study: interface for a remote control centre
6.1Bridge simulators6.2Evaluation scenarios6.3Performance measures6.4Eye tracking6.5Usability questionnaires6.6Alarm evaluation6.7Validation with crews6.8Design iteration6.9Documentation6.10Practical exercise: evaluation in a bridge simulator
7.1SOLAS Chapter V7.2MSC.252 guidelines on integrated systems7.3IEC 62288 on presentation7.4IEC 61924-2 on integrated systems7.5Maritime cybersecurity MSC-FAL.1/Circ.37.6Classification society requirements7.7Military habitability standards7.8Ethics of automation7.9Shared responsibility7.10Case study: compliance audit of a bridge
8.1Analysis of the vessel8.2Task analysis8.3Interface requirements8.4Conceptual design8.5Prototype8.6Simulator evaluation8.7Regulatory analysis8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Kongsberg K-Sim, Wärtsilä NTPRO, Figma, Tobii Pro Lab and OpenCPN, in free, academic or evaluation versions. Practical work is based on real procedures for bridge simulator evaluations, navigation interface prototyping and workload analysis. Assessment is continuous by module plus the final project.
Standards covered: IEC 62288, IEC 61924-2, SOLAS Chapter V, IMO Resolution MSC.252(83), IMO Resolution MSC.302(87), STCW Convention, IMO S-Mode Guidelines MSC.1/Circ.1609.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Kongsberg K-Sim, Wärtsilä NTPRO, Figma, Tobii Pro Lab and OpenCPN, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in SDR and Military Waveforms
Online postgraduate diploma of 800 hours in SDR and military waveforms. 8 modules covering SDR architecture, digital signal processing, modulation and coding, SCA 4.1, standardised HF/UHF…
Diploma in NATO Standards for CMS Systems
Online postgraduate diploma of 800 hours in NATO standards for combat management systems (CMS), with 8 modules covering naval CMS, NATO tactical data links, open architectures…
Diploma in Ethics in Mobility/Counter-Mobility Strategies
Online postgraduate diploma of 800 hours in ethics in mobility/counter-mobility strategies. 8 modules covering mobility and counter-mobility engineering, the ethics of obstacles, mines and explosive remnants,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships