Diploma in Disc and Drum Brakes for Heavy Vehicles
Online postgraduate diploma of 800 hours in disc and drum brakes for heavy vehicles, structured in 8 modules covering braking physics, drum and disc brakes, friction materials, actuation systems, thermal behaviour and testing, with UNECE R13, UNECE R90 and Ansys Mechanical, with an assigned technical tutor.
Diploma in Disc and Drum Brakes for Heavy Vehicles — studying from Malta
Malta's rich heritage, including historic buildings, vintage vehicles and maritime craft, creates a niche for restoration and conservation work. Owners of classic cars, motorcycles and boats seek specialist workshops with knowledge of period engineering and materials. Restoration of historic architecture also requires engineers and technicians familiar with traditional construction methods and conservation rules. Opportunities tend to be found with specialist workshops, heritage organisations and private restorers.
Fees for Malta: €1,290 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Is there a recognised professional body in Malta for restoration and classic vehicle engineering?
Malta does not have a single state-regulated profession for classic vehicle restoration. Vehicle registration and roadworthiness are handled by Transport Malta. SEIUM Institute's qualifications are private, not official state degrees, and are not accredited by any national body. Recognition is determined by employers, clients or the relevant body, so check these before enrolling.
What work could restoration engineers find in Malta?
Malta has a niche market for classic vehicle restoration, mainly through independent workshops, specialist garages and private collectors. Work is often built on reputation and practical craftsmanship. Whether a private online qualification adds value is for individual clients and employers to judge, so it is best to consider it alongside your hands-on experience.
Can I study this part-time with a workshop job, and is funding possible?
Yes. The programmes are fully online, taught in English and suitable for study from home, without needing a student visa. Hours range from 300 to 1,900 depending on the programme. Fees are payable in instalments, employer sponsorship is possible, and each student has an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the physics of braking in heavy vehicles.
Analyse how drum brakes work.
Analyse how disc brakes work.
Select suitable friction materials.
Diagnose pneumatic and hydraulic actuation systems.
Model the thermal behaviour of brakes.
Inspect, maintain and test brake systems.
Who it's for
- Braking system engineers.
- Heavy vehicle brake technicians.
- Friction material engineers.
- Vehicle roadworthiness inspectors.
- Test engineers working on brakes and chassis.
- Commercial vehicle workshop managers.
- Engineering or science graduates looking to enter the truck and bus sector.
What you'll work with
- UNECE Regulation R13 (braking of heavy vehicles and trailers)
- UNECE Regulation R90 (replacement brake linings and discs)
- ISO 3450 (braking systems of earth-moving machinery)
- SAE J2522 (dynamometer friction performance test)
- ISO 4925 (non-petroleum brake fluids)
- Directive 2014/45/EU (periodic roadworthiness tests)
- ISO 26867 (friction material dynamometer testing)
- Ansys Mechanical
- MATLAB/Simulink
- Simcenter Amesim
- HBK nCode
8 modules
1.1Braking energy and power1.2Brake force distribution between axles1.3Service, emergency and parking brakes1.4UNECE R13 requirements1.5Machinery brakes to ISO 34501.6Pneumatic and hydraulic brakes1.7Auxiliary retarders1.8Stopping distances1.9Roadworthiness inspection regulations1.10Workshop: brake force distribution of a three-axle truck
2.1Leading and trailing shoes2.2S-cam and wedge actuation2.3Brake factor2.4Automatic slack adjusters2.5Linings and their attachment2.6Drum wear and ovality2.7Heating and fade2.8Advantages in dirty environments2.9Maintenance and adjustment2.10Practical exercise: adjustment of an S-cam brake
3.1Floating and fixed callipers3.2Ventilated discs3.3Pads and materials3.4Temperature distribution3.5Thermal cracking in discs3.6Automatic adjustment3.7Disc brakes on trailers3.8Disc versus drum comparison3.9Maintenance3.10Case study: diagnosis of disc cracking
4.1Composition of linings and pads4.2Organic, semi-metallic and sintered materials4.3Friction coefficient and stability4.4Wear and particle emissions4.5Type approval to UNECE R904.6SAE J2522 testing4.7Copper-free materials4.8Wet multi-disc brakes4.9Selection by application4.10Lab: friction test on a dynamometer
5.1Dual-circuit pneumatic systems5.2Compressors and air dryers5.3Brake chambers and spring brakes5.4Relay and load-sensing valves5.5High-pressure hydraulic brakes5.6Brake fluids to ISO 49255.7Electronic braking systems (EBS)5.8Anti-lock braking and stability control5.9Electronic diagnostics5.10Practical exercise: diagnosis of a pneumatic circuit
6.1Thermal models of brakes6.2Prolonged descents6.3Fade and recovery6.4Finite element simulation6.5Brake noise and vibration6.6Disc thickness variation vibration6.7In-service temperature control6.8Influence of the retarder6.9Type I and Type II tests6.10Case study: Ansys thermal model of a mountain pass descent
7.1Technical inspection of brakes7.2Roller brake testers7.3Wear measurement7.4Component replacement7.5Track testing7.6Dynamometer testing7.7Fleet management and brakes7.8Analysis of brake-related accidents7.9Driver training7.10Workshop: roller brake tester test
8.1Vehicle definition8.2Braking requirements8.3Choice of disc or drum8.4Friction material8.5Actuation system8.6Thermal analysis8.7Test plan8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys Mechanical, MATLAB/Simulink, Simcenter Amesim and HBK nCode, in free, academic or evaluation versions. Testing is studied through real procedures for dynamometer friction tests, thermal modelling of brakes on descents and roller brake tester inspection. Assessment is continuous by module, plus the final project.
Standards covered: UNECE Regulation R13, UNECE Regulation R90, ISO 3450, SAE J2522, ISO 4925, Directive 2014/45/EU, ISO 26867.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys Mechanical, MATLAB/Simulink, Simcenter Amesim and HBK nCode, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Traction Models for Sand and Mud
Online postgraduate diploma of 800 hours in traction models for sand and mud: 8 modules covering traction fundamentals, semi-empirical and empirical mobility models, specific modelling of…
Postgraduate Diploma in Paint Stratigraphy and Materials Forensics
800-hour online Postgraduate Diploma in Paint Stratigraphy and Materials Forensics. 8 modules with ASTM E1610 (forensic paint analysis), ASTM E2937 (IR spectroscopy in forensic paints) and…
Diploma in Off-Road Semi-Active Suspension Systems
Online postgraduate diploma of 800 hours in off-road semi-active suspension systems, structured in 8 modules covering off-road vehicle dynamics, variable damping dampers, sensors and data acquisition,…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships