Course on International Regulation in Nuclear Robotics
Online course of 300 h in International Regulation in Nuclear Robotics. 6 modules covering IEC 61513 (I&C systems important to safety), IEC 61508 (functional safety) and ROS 2. Dedicated tutor and enrolment open.
Course on International Regulation in Nuclear Robotics — studying from Malta
Malta has no nuclear power generation, and its nuclear engineering relevance lies mainly in radiation protection, safeguards awareness, medical and industrial radiation use, and regulatory oversight of radioactive materials. The Malta Radiation Protection Department and the Health Directorate oversee the use of radiation in hospitals, research and industry. Engineers may find roles in medical physics support, radiological monitoring and compliance. The sector is largely confined to applied and regulatory work rather than fuel cycle activity.
Fees for Malta: €448 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Malta
Typical roles
Questions from Malta
Is there a professional route in Malta for nuclear engineering, and is SEIUM's qualification recognised?
Malta does not operate nuclear power plants, so nuclear engineering careers there are limited, and roles are more likely in regulation, consultancy or international work. SEIUM Institute's qualifications are private, not official state degrees, and are not accredited by any national body. Recognition is decided by employers or the relevant regulatory body, so verify this before enrolling.
What employment could this training lead to in Malta?
Given Malta has no nuclear power generation, local opportunities are few and would mostly sit within consultancy, international organisations or firms working abroad. Employers in these roles set their own qualification requirements, and a private online qualification may or may not be accepted. Reviewing job requirements and speaking with employers will show how the training would be viewed.
Can I study this from Malta without relocating, and how is the workload structured?
Yes, the programmes are 100% online, taught in English and suitable for study from home, so you do not need a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours. Each student has an assigned technical tutor, and fees are payable in instalments, with possible employer sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the applications of robotics throughout the nuclear fuel cycle.
Identify the international standards applicable to robots in nuclear facilities.
Compare different countries' regulatory approaches to robotic equipment.
Analyse the verification and validation challenges of autonomous systems.
Interpret export control requirements for dual-use technology.
Integrate cybersecurity and physical security requirements into regulatory design.
Develop an international regulatory strategy for a nuclear robotic system.
Who it's for
- Robotics regulatory affairs specialist looking to specialise in International Regulation in Nuclear Robotics.
- Functional safety engineer looking to specialise in International Regulation in Nuclear Robotics.
- Technical standardisation specialist looking to specialise in International Regulation in Nuclear Robotics.
- Export control consultant looking to specialise in International Regulation in Nuclear Robotics.
- Verification and validation engineer looking to specialise in International Regulation in Nuclear Robotics.
- Nuclear equipment licensing technician looking to specialise in International Regulation in Nuclear Robotics.
- Engineering or science graduates looking to move into the nuclear industry.
What you'll work with
- IEC 61513 (I&C systems important to safety)
- IEC 61508 (functional safety)
- ISO 10218-1 and ISO 10218-2 (industrial robots)
- IEC 60880 (software for category A systems)
- Regulation (EU) 2021/821 (dual-use export controls)
- Nuclear Suppliers Group Guidelines (INFCIRC/254)
- Regulation (EU) 2024/1689 (Artificial Intelligence Act)
6 modules · 300 h
1.1Applications in operations, emergencies and waste1.2International actors: IAEA, NEA and Euratom1.3The UK RAIN and RAICo programmes1.4The Fukushima robotics programme and IRID1.5Robotics at Chernobyl1.6Technological and regulatory challenges1.7NEA initiatives on robotics1.8Industry associations and standardisation1.9The gap between innovation and regulation1.10Case study: robotic deployment at Fukushima Daiichi
2.1ISO/TC 299 on robotics2.2IEC/TC 45 on nuclear instrumentation2.3IEC 61513 applied to robotic systems2.4ISO 17874 for telemanipulation2.5Environmental qualification according to IEEE 3232.6Seismic qualification according to IEEE 3442.7Electromagnetic compatibility2.8Radiation testing of electronics2.9Standardisation gaps for autonomy2.10Workshop: map of standards applicable to a nuclear robot
3.1The ONR and its technical assessment guides3.2The NRC and robotics in plants3.3Spain's CSN and equipment authorisation3.4ASNR in France3.5Japan's NRA after Fukushima3.6Canada's CNSC3.7Regulatory sandboxes in the UK3.8Mutual recognition of qualifications3.9Prescriptive versus goal-based regulation3.10Case study: ONR versus NRC for an inspection robot
4.1Safety cases4.2GSN notation for arguments4.3Formal verification of autonomous robots4.4Scenario-based testing4.5UL 4600 for autonomous systems4.6IEEE 7001 and transparency4.7Certification of adaptive software4.8Meaningful human oversight4.9Uncertainty in perception4.10Practice: GSN argument for an autonomous function
5.1Robot cybersecurity with IEC 624435.2Nuclear computer security requirements5.3Physical security and the insider threat5.4Export control of hardened robots5.5Regulation (EU) 2021/821 applied to robotics5.6Data protection in inspections5.7Ethics and employment5.8International R&D cooperation5.9Regulatory trends5.10Case study: export classification of a hardened manipulator
6.1Selecting the robotic system6.2Target markets and jurisdictions6.3Identifying standards and requirements6.4Safety argument6.5Qualification plan6.6Export control analysis6.7International compliance matrix6.8Certification roadmap6.9Report and presentation6.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake period, making it easy to combine with work.
Each module combines theory, guided reading of the original standards and applied exercises. The software used is ROS 2, Gazebo, MATLAB/Simulink, Enterprise Architect (trazabilidad de requisitos), in free, academic or trial versions. Testing is studied through real procedures from comparative analysis of national regulatory approaches, review of verification cases for autonomous systems, export classification studies. Assessment is continuous for each module, plus a final capstone project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the applications of robotics throughout the nuclear fuel cycle.
Identify the international standards applicable to robots in nuclear facilities.
Compare different countries' regulatory approaches to robotic equipment.
Analyse the verification and validation challenges of autonomous systems.
Interpret export control requirements for dual-use technology.
Where this takes you
Requirements
- No previous qualification is required.
- An internet connection and a computer able to run the programme software.
- A level of English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
You will work with ROS 2, Gazebo, MATLAB/Simulink, Enterprise Architect (trazabilidad de requisitos). Free, academic or trial versions are used, and your tutor will point out a free alternative where one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the capstone project. It is SEIUM's own qualification, not an official state-accredited degree.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the recognition policy when you enrol.
Related programmes
Course in Neutronic Modelling in Complex Geometries
Online 300-hour course in neutronic modelling in complex geometries. 6 modules covering ANSI/ANS-10.4 (V&V of nuclear scientific software), ANSI/ANS-8.24 (validation of neutron transport methods for criticality)…
Course in Radiation Ethics in Animal Research
Online 300-hour course in radiation ethics in animal research. 6 modules covering Directive 2010/63/EU (protection of animals used for scientific purposes), Royal Decree 53/2013 (basic rules…
Course on High-Power Laser Technologies in Fusion
Online course of 300 h in High-Power Laser Technologies in Fusion. 6 modules covering IEC 60825-1 (safety of laser products), Directive 2006/25/EC (artificial optical radiation) and…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships