Master’s in Resonant and High-Frequency Converters Engineering
Online master's programme of 1,900 hours in resonant and high-frequency converter engineering: 12 modules covering resonant circuit theory, LLC and CLLC converters, GaN and SiC devices, high-frequency magnetics, control, PCB parasitics, EMC and wireless power transfer, with an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse resonant circuits using first harmonic approximation.
Design LLC and CLLC converters with soft switching.
Select GaN and SiC semiconductors for high-frequency operation.
Design planar transformers and high-frequency inductors.
Implement digital control of resonant converters.
Apply layout and filtering techniques to meet EMC regulations.
Experimentally validate a high-density resonant prototype.
Who it's for
- Power supply engineers moving into resonant and high-frequency designs.
- Resonant converter designers.
- Magnetics engineers.
- Wireless charging engineers.
- High-density hardware engineers.
- Power validation engineers.
- Engineering or science graduates aiming to enter the data centre sector.
What you'll work with
- IEC 62368-1 (safety of audio/video, information and communication technology equipment)
- CISPR 32 (EMC emissions of multimedia equipment)
- IEC 61000-3-2 (limits for harmonic current emissions)
- IEC 61851-1 (electric vehicle conductive charging systems)
- SAE J2954 (wireless power transfer for light-duty electric vehicles)
- Qi Wireless Power Specification (wireless charging of mobile devices)
- IEC 62311 (assessment of electronic equipment for human exposure to electromagnetic fields)
- ICNIRP 2010 (guidelines for limiting exposure to low-frequency fields)
- LTspice
- PLECS
- SIMetrix/SIMPLIS
- Ansys Maxwell
- Frenetic Magnetics
12 modules · 1900 h
1.1Series and parallel resonant tanks1.2Quality factor and gain1.3First harmonic approximation (FHA)1.4Input impedance and inductive region1.5ZVS and ZCS soft switching1.6Circulating energy and losses1.7Impedance transformation1.8Normalised gain diagrams1.9Limitations of harmonic analysis1.10Practical exercise: gain sweep of a tank
2.1Operation below and above resonance2.2Design of Lm, Lr and Cr2.3Turns ratio and input range2.4Magnetic integration of the tank2.5Soft start and current limiting2.6Burst mode at light load2.7Synchronous rectification in LLC2.8Interleaved three-phase LLC2.9Frequency control and hybrid mode2.10Case study: 1 kW LLC for a server
3.1Series resonant converter (SRC)3.2Parallel resonant converter (PRC)3.3LCC and high-voltage applications3.4Bidirectional CLLC converter3.5Dual active bridge with soft switching3.6Class E and class D converters3.7Quasi-resonant and multi-resonant converters3.8Resonant switched-capacitor topologies3.9Comparison of resonant topologies3.10Workshop: simulation of a bidirectional CLLC
4.1GaN HEMT: structure and behaviour4.2SiC MOSFETs at high frequency4.3Output capacitance and Qoss charge4.4Reverse conduction in GaN4.5Switching losses at MHz4.6Low-inductance packages4.7Drivers for GaN and SiC4.8Reliability and dynamic Rds(on) degradation4.9Device selection by figure of merit4.10Lab: GaN switching at 1 MHz
5.1Ferrites for MHz and losses5.2Skin and proximity effects5.3Planar PCB transformers5.4Litz wire: strand selection5.5Leakage inductance as a resonant element5.6Inter-winding capacitances5.7Finite element modelling5.8Thermal management of planar magnetics5.9Core loss measurement5.10Practical exercise: planar transformer for LLC
6.1Extended small-signal models6.2Variable frequency control6.3Phase-shift control6.4Charge control6.5Digital control with high-resolution PWM6.6Synchronous rectification timing6.7Protection against capacitive operation6.8Transient response and stability6.9Multiphase parallel control6.10Lab: digital control of an LLC
7.1Power loop inductance7.2Vertical and lateral layout7.3Parasitic capacitances and coupling7.4Parasitic extraction7.5Multilayer and heavy copper boards7.6Integration of magnetics into the board7.7High-frequency measurement: probes7.8High-frequency grounding7.9Design rules for MHz7.10Workshop: switching loop optimisation
8.1Emission spectrum in soft switching8.2Transformer common-mode noise8.3Inter-winding shielding8.4Compact EMI filters8.5Radiated emissions above 30 MHz8.6EMI simulation of converters8.7Pre-compliance testing8.8Immunity and fast transients8.9Frequency dithering techniques8.10Practical exercise: common-mode noise reduction
9.1Inductive coupling and k factor9.2SS, SP and LCC compensation9.3Qi standard for mobile devices9.4Wireless charging of electric vehicles9.5Class E inverters at 6.78 MHz9.6Alignment and misalignment tolerance9.7Field exposure safety9.8Foreign object detection9.9End-to-end efficiency9.10Case study: 15 W wireless charger
10.148 V server power supplies10.2Unregulated IBC converters10.3USB-C Power Delivery chargers10.4Bidirectional on-board chargers10.5High-voltage supplies for X-ray10.6Induction heating10.7Ballasts and LED drivers10.8Telecommunications power supplies10.9Power density and W/cm³ metrics10.10Case study: 100 W USB-C charger
11.1Precision efficiency measurement11.2High-frequency current measurement11.3Laboratory verification of ZVS11.4Thermography of prototypes11.5Short-circuit and overload tests11.6Accelerated reliability and HALT11.7Electrical safety tests11.8Standardised EMC tests11.9Technical validation documentation11.10Lab: complete validation plan
12.1Resonant converter specification12.2Tank and magnetics design12.3Simulation and loss estimation12.4Control and protection design12.5High-frequency PCB design12.6Prototype assembly and testing12.7Evaluation of the resonant prototype12.8Conclusions and future work12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, making it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is LTspice, PLECS, SIMetrix/SIMPLIS, Ansys Maxwell and Frenetic Magnetics, in free, academic or evaluation versions. Testing is studied through real procedures: verification of ZVS switching on GaN prototypes, loss measurement in planar transformers, and conducted emissions tests on high-density converters. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: IEC 62368-1, CISPR 32, IEC 61000-3-2, IEC 61851-1, SAE J2954, Qi Wireless Power Specification, IEC 62311, ICNIRP 2010.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with LTspice, PLECS, SIMetrix/SIMPLIS, Ansys Maxwell and Frenetic Magnetics, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A university degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the programme's software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Product EMC/EMI Engineering
Online master's programme of 1,900 hours in product EMC/EMI engineering. 12 modules covering the EMC regulatory framework, coupling mechanisms, EMC board design, switched-mode power supplies, cables…
Master’s in Functional Safety in Electronics Engineering
Online master's programme of 1,900 hours in functional safety in electronics engineering, structured in 12 modules covering hazard and risk analysis, safety system architectures, hardware failure…
Master’s in Embedded Observability and Telemetry
Online master's programme of 1,900 hours in embedded observability and telemetry (logging, tracing, metrics and health monitoring). 12 modules covering on-chip debugging and tracing, efficient logging,…
More in Electronics, Embedded Systems & Telecom
All Electronics, Embedded Systems & Telecom programmes → · How to apply · Fees & financing · Scholarships