Radiation Protection Audit Methodologies Course
300-hour online course in radiation protection audit methodologies. 6 modules covering ISO 19011 (guidelines for auditing management systems), IAEA GSR Part 3 (radiation protection and safety of sources) and advanced Excel (checklists). Assigned tutor and open enrolment.
Radiation Protection Audit Methodologies Course — studying from India
India's nuclear programme is state-led and centred on the Department of Atomic Energy, with operations managed by the Nuclear Power Corporation of India and research carried out at the Bhabha Atomic Research Centre. Reactor sites are located at places such as Tarapur, Kakrapar, Kudankulam and Rawatbhata. Regulation is handled by the Atomic Energy Regulatory Board, which sets safety standards for reactors and fuel facilities. Engineers in this field work on reactor systems, fuel cycle technologies, radiation safety and materials, with expertise supported by institutions such as the Indira Gandhi Centre for Atomic Research.
Fees for India: ₹47,500 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Who regulates nuclear engineering work in India and does this course satisfy them?
The Atomic Energy Regulatory Board (AERB) regulates nuclear safety in India, and the Department of Atomic Energy runs the sector. SEIUM's qualification is private, not an official degree, and is not accredited by any national body. It does not satisfy any regulatory requirement, and AERB or the employer will decide what qualifications they require.
Which Indian employers work in nuclear engineering and the fuel cycle?
Public sector nuclear organisations and their associated industries are the main employers, and entry normally follows government recruitment and vetting processes. Private employers in the sector also exist. Because hiring is tightly controlled, a private online qualification is unlikely to be the deciding factor, and recognition depends on the employer.
Is this programme workable with a job in India, and how is it funded?
The programme is online and taught in English, so you can study from home across India without a student visa. Each student is assigned a technical tutor and completes a final project. Fees are payable in instalments, and employer sponsorship is possible, which is often the practical route for working engineers.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the role of auditing in radiation protection programmes.
Plan an audit by defining scope, criteria and team.
Gather and evaluate evidence through interviews, observation and document review.
Classify findings and draft clear, traceable audit reports.
Monitor corrective actions and their effectiveness.
Adapt the methodology to specialised audits in different sectors.
Carry out a complete simulated audit of a radiation protection programme.
Who it's for
- Radiation protection auditor who wants to specialise in Radiation Protection Audit Methodologies.
- Head of a radiation protection service who wants to specialise in Radiation Protection Audit Methodologies.
- Quality technician in radioactive installations who wants to specialise in Radiation Protection Audit Methodologies.
- Inspector from a regulatory body who wants to specialise in Radiation Protection Audit Methodologies.
- Radiological compliance consultant who wants to specialise in Radiation Protection Audit Methodologies.
- Supervisor of radioactive installations who wants to specialise in Radiation Protection Audit Methodologies.
- Engineering or science graduates seeking to enter nuclear power plants.
What you'll work with
- ISO 19011 (guidelines for auditing management systems)
- IAEA GSR Part 3 (radiation protection and safety of sources)
- IAEA GSR Part 2 (leadership and management for safety)
- Royal Decree 1029/2022 (health protection against the risks of ionising radiation)
- Directive 2013/59/Euratom (basic safety standards)
- ISO/IEC 17021-1 (bodies providing audit and certification of management systems)
- ISO 45001 (occupational health and safety)
6 modules · 300 h
1.1Purpose of auditing and what an audit is not1.2Types: internal, second-party and certification1.3Regulatory inspection versus voluntary audit1.4Audit principles and auditor conduct1.5Reference standards for auditing management systems1.6Regulatory framework that generates auditable requirements1.7Facility quality assurance programme1.8Competences required of the audit team1.9Independence, impartiality and conflicts of interest1.10Exercise: defining audit scope and criteria
2.1Risk-based annual audit programme2.2Definition of scope, criteria and objectives2.3Prior document review2.4Identification of processes and responsible persons2.5Preparation of the audit plan2.6Checklist and open questions2.7Logistics, access and security requirements2.8Opening meeting2.9Time and team management2.10Practice: drafting a complete plan
3.1Effective interview techniques3.2Direct observation of work3.3Records sampling and selection criteria3.4Verification of calibrations and dosimetry3.5Checking signage and zoning3.6Traceability of sources and inventories3.7Review of staff training and fitness3.8Evaluation of emergency plans3.9Recording evidence and field notes3.10Practice: auditing a process with real evidence
4.1Classification: non-conformity, observation and opportunity for improvement4.2Drafting a defensible finding4.3Relationship between evidence, requirement and non-compliance4.4Closing meeting and management of disagreements4.5Structure and tone of the audit report4.6Auditee's corrective action plan4.7Verification of closure and sufficient evidence4.8Escalation of recurring findings4.9Input to the management review4.10Practice: drafting findings from a case
5.1Industrial radioactive installations5.2Diagnostic radiology, nuclear medicine and radiotherapy5.3Research laboratories using isotopes5.4Industrial radiography and field work5.5Radon and naturally occurring radioactive material facilities5.6Transport of radioactive material5.7Physical protection and source control5.8Suppliers and external contractors5.9Remote auditing and distance document review5.10Practice: adapting the checklist to a sector
6.1Choice of installation to be audited6.2Analysis of the applicable regulatory framework6.3Audit program and plan6.4Own checklist6.5Simulation of evidence collection6.6FINDINGS CLASSIFIED AND JUSTIFIED6.7Complete audit report6.8MONITORING AND CLOSURE PLAN6.9Methodological memory6.10Defense of work
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded lectures and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is advanced Excel (checklists), Microsoft Power BI, audit management software (for example, Isotools), Microsoft SharePoint, in free, academic or evaluation versions. The exercises are based on real audit simulation procedures in radioactive installations, review of documentary evidence and drafting of findings reports. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the role of auditing in radiation protection programmes.
Plan an audit by defining scope, criteria and team.
Gather and evaluate evidence through interviews, observation and document review.
Classify findings and draft clear, traceable audit reports.
Monitor corrective actions and their effectiveness.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The course uses advanced Excel (checklists), Microsoft Power BI, audit management software (for example, Isotools) and Microsoft SharePoint. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
An in-house diploma from SEIUM Institute upon passing continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed on a course or postgraduate diploma in the same area are credited towards the advanced programme. Check the credit transfer policy when you enrol.
Related programmes
IAEA/ICRP Regulation in Radioactive Waste Course
300-hour online course in IAEA/ICRP regulation of radioactive waste. 6 modules covering IAEA GSG-1 (classification of radioactive waste), IAEA GSR Part 5 (predisposal management of radioactive…
Fusion Neutron Generation Course
Online 300-hour course in fusion neutron generation. 6 modules covering ASTM E261 (neutron fluence determination by activation), ASTM E722 (characterisation of neutron spectra at 1 MeV…
Course in Atmospheric Radiological Dispersion Simulation
Online 300 h course in atmospheric radiological dispersion simulation. 6 modules aligned with IAEA GSR Part 7 (emergency preparedness and response), IAEA GSG-2 (criteria for nuclear…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships