Postgraduate Diploma in High Renewable Penetration and Synthetic Inertia
Online 800-hour Postgraduate Diploma in High Renewable Penetration and Synthetic Inertia. 8 modules covering Regulation (EU) 2016/631 (RfG network code), Regulation (EU) 2017/1485 (SOGL operation guidelines) and DIgSILENT PowerFactory. Assigned tutor and open enrolment.
Postgraduate Diploma in High Renewable Penetration and Synthetic Inertia — studying from India
India's power sector is one of the largest in the world, combining generation, transmission and distribution with rapid growth in renewable energy. Public utilities such as NTPC and Power Grid Corporation of India operate major assets, while private firms and state distribution companies manage local networks. The Central Electricity Authority, the Central Electricity Regulatory Commission and the Ministry of Power guide planning and regulation, and the Bureau of Energy Efficiency promotes efficiency standards. Engineers work on grid operations, substations, renewable integration and energy management systems across the country.
Fees for India: ₹95,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which professional bodies in India recognise energy and power network engineers?
Power engineers in India are commonly recognised through the Institution of Engineers (India), the Central Electricity Authority for technical standards, and state electricity regulatory commissions for utility work. Registration as a licensed electrical contractor or supervisor follows state rules. SEIUM's qualifications are private, not state degrees and not accredited by any national body, so recognition is decided by employers or the relevant body.
Which employers in India hire energy and networks engineers?
Employers include state and central power utilities, transmission companies such as Power Grid Corporation, renewable energy developers, and grid and automation firms. Smart grid and distribution projects also hire engineers. A private online qualification can help with specialisation, but employers mostly assess field experience, utility knowledge and project delivery.
Is this programme manageable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so you can study from India with no student visa. Plan around IST when scheduling. Specialist courses are about 300 hours, diplomas about 800 and master's about 1,900. You get an assigned technical tutor, and fees can be paid in instalments. Many energy employers fund professional training, so ask your manager about sponsorship.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the effects of low inertia on power systems.
Analyse the frequency response and its ROCOF and nadir indicators.
Model grid-following converters and their limitations.
Design grid-forming control strategies and synthetic inertia.
Assess stability with high penetration of power electronics.
Size support assets such as batteries and synchronous condensers.
Integrate these studies into grid planning and operation.
Who it's for
- Power system stability engineer who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- Renewable integration engineer who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- Converter control engineer who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- Transmission network planner who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- Connection studies engineer who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- System operation analyst who wants to specialise in High Renewable Penetration and Synthetic Inertia.
- Graduates in engineering or sciences seeking to enter system operators.
What you'll work with
- Regulation (EU) 2016/631 (RfG network code)
- Regulation (EU) 2017/1485 (SOGL operation guidelines)
- IEEE 2800-2022 (inverter-based resources in transmission)
- IEEE 1547-2018 (interconnection of distributed resources)
- EN 50549-1 (generation connected to low voltage)
- IEC 61400-27-1 (wind simulation models)
8 modules · 800 h
1.1Synchronous inertia and constant H1.2Swing equation and rotating kinetic energy1.3RoCoF and frequency nadir1.4Displacement of synchronous generation by renewables1.5SNSP ratio and operating limits1.6Reference incidents: South Australia 2016 and United Kingdom 20191.7Iberian blackout of 2025 and lessons learned1.8Short-circuit power and grid strength1.9SCR and ESCR indicators1.10Laboratory: simulation of an imbalance with different inertia
2.1Primary, secondary and tertiary control2.2Fast frequency response FFR2.3Frequency containment reserve FCR and droop2.4Restoration reserve aFRR and mFRR2.5Requirements of the European SOGL network code2.6Under-frequency load shedding2.7Demand frequency response2.8Reserve sizing by reference incident2.9Balancing service markets2.10Practice: sizing FFR for an island system
3.1Phase-locked loop (PLL)3.2Vector current control in dq axes3.3Emulated inertia via frequency derivative3.4Limitations in weak grids3.5PLL interaction instabilities3.6Response to voltage dips3.7Reactive current injection3.8WECC generic converter models3.9Model validation against tests3.10Workshop: PLL tuning in a weak grid
4.1Concept of a voltage source behind impedance4.2P-f and Q-V droop control4.3Virtual synchronous machine (VSM)4.4Power synchronisation control4.5Virtual oscillator and dispatchable control4.6Current limitation in grid-forming4.7ENTSO-E and NERC requirements for grid-forming4.8AEMO and National Grid specifications4.9Energy required on the DC bus for inertia4.10Laboratory: VSM implementation in simulation
5.1Small-signal stability and modal analysis5.2Subsynchronous oscillations caused by converters5.3Voltage stability and reactive power control5.4Transient stability with converters5.5Control-control interactions and resonances5.6Impedance analysis and Nyquist criterion5.7EMT versus RMS simulation5.8PSCAD, PowerFactory and PSS/E tools5.9Low short-circuit level system studies5.10Case study: oscillation analysis in a wind cluster
6.1Synchronous condensers and flywheels6.2Batteries with grid-forming control6.3Variable-speed pumped hydro6.4STATCOM with storage6.5National Grid stability services6.6Remuneration for inertia and short-circuit capacity6.7Techno-economic comparison of solutions6.8Optimal location of stability resources6.9Renewable hybridisation with storage6.10Practice: comparison of a synchronous condenser and a grid-forming BESS
7.1Grid planning towards 100 % renewables7.2ENTSO-E TYNDP scenarios7.3Real-time inertia monitoring tools7.4Security constraints in dispatch7.5Service restoration with converters7.6Black start with grid-forming7.7RfG connection requirements and their review7.8TSO-DSO coordination7.9Compliance testing of advanced services7.10Case study: operating plan for a system with 80 % renewables
8.1Characterisation of the study power system8.2Renewable penetration scenarios8.3Calculation of inertia and critical RoCoF8.4Stability studies of the base case8.5Selection of synthetic inertia solutions8.6Modelling and simulation of the solutions8.7Techno-economic analysis8.8Operational and regulatory recommendations8.9Report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded lectures and a dedicated technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is DIgSILENT PowerFactory, PSCAD, PSS/E, MATLAB/Simulink, in free, academic or evaluation versions. Practicals cover real procedures for RMS and EMT stability simulations, frequency response studies, and real-time testing with hardware-in-the-loop. Assessment is continuous per module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the effects of low inertia on power systems.
Analyse the frequency response and its ROCOF and nadir indicators.
Model grid-following converters and their limitations.
Design grid-forming control strategies and synthetic inertia.
Assess stability with high penetration of power electronics.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is between 10 and 15 hours a week on average, compatible with a full-time job.
You will work with DIgSILENT PowerFactory, PSCAD, PSS/E, MATLAB/Simulink. Free, academic or evaluation versions are used, and the tutor indicates a free alternative where one exists.
An in-house SEIUM Institute diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official Ministry qualification.
Yes. Modules passed on a course or postgraduate diploma in the same area are recognised towards the higher programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Specific Protection for Direct Current
Online 800-hour postgraduate diploma in specific protection for direct current. 8 modules covering IEC 60947-2 (low-voltage circuit breakers), IEC 61660-1 (short-circuit currents in DC installations) and…
Postgraduate Diploma in Offshore Wind: Foundations and Export Cables
Online 800-hour Postgraduate Diploma in Offshore Wind: Foundations and Export Cables. 8 modules covering IEC 61400-3-1 (fixed-foundation offshore wind turbines), DNV-ST-0126 (wind turbine support structures) and…
Postgraduate Diploma in Electrical Design and Layout of PV Plants
800-hour online Postgraduate Diploma in Electrical Design and Layout of PV Plants. 8 modules covering IEC 62548 (design requirements for PV arrays), IEC 60364-7-712 (photovoltaic installations)…
More in Energy and Networks
All Energy and Networks programmes → · How to apply · Fees & financing · Scholarships