Postgraduate DiplomaNaval, Offshore & Sports Nautical Applications open

Postgraduate Diploma in Asset Models and OT/IT Integration

800-hour online Postgraduate Diploma in Asset Models and OT/IT Integration. 8 modules covering IEC 62264 (ISA-95, enterprise-control system integration), IEC 62443 (security for industrial automation and control systems) and AVEVA PI System. Dedicated tutor and open enrolment.

Duration800 h
ModeOnline
LanguageEnglish
Start datesSet by the faculty
AwardSEIUM Institute diploma

Postgraduate Diploma in Asset Models and OT/IT Integration — studying from India

India has a long coastline and growing maritime ambitions, supported by shipbuilding and port development at Kochi, Mumbai, Visakhapatnam and Kolkata. Cochin Shipyard, Mazagon Dock Shipbuilders, Garden Reach Shipbuilders and Larsen & Toubro's offshore arm are important employers. The Directorate General of Shipping sets regulations for vessel safety and seafarers, while the Indian Register of Shipping provides classification services. Offshore oil and gas activity led by Oil and Natural Gas Corporation adds further demand. Engineers work on naval architecture, marine systems, offshore structures and recreational boat design.

Fees for India: ₹190,000 (Indian Rupee), with instalments and employer sponsorship available.

Relevant bodies in India

  • Directorate General of Shipping (DG Shipping)
  • Indian Register of Shipping (IRS)
  • Bureau of Indian Standards (BIS)
  • Indian Institute of Technology (IIT) naval architecture departments

Typical roles

  • Naval Architect
  • Marine Engineer
  • Offshore Structures Engineer
  • Marine Systems Engineer

Questions from India

Which bodies regulate naval and offshore engineering in India?

The Directorate General of Shipping regulates shipping, and the Indian Register of Shipping is the classification society. Naval work is tied to the Indian Navy and shipyards. SEIUM's qualification is a private one and is not accredited by any national body, so recognition by these organisations is not automatic and must be checked with them.

Which employers in India use naval, offshore and nautical engineering skills?

Shipyards such as Mazagon Dock and Cochin Shipyard, offshore oil and gas service firms, marine consultancies, and sports boat builders are typical employers. Each decides its own hiring criteria. The programme can support your profile, but it does not secure a role or any particular recognition.

Can I study this online from India with a job, and what are the costs?

The programme is 100% online and taught in English, so you can study from anywhere in India and do not need a student visa. Workload depends on the programme length, with support from an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible.

Virtual lab · try it before you enrol

Take the controls.

Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.

SIM · LIVE ●
Learning outcomes

What you will be able to do

01

Build asset models with standardised hierarchies and taxonomies.

02

Apply asset data standards such as ISO 14224 and ISO 15926.

03

Describe the architecture of operational technology systems.

04

Design OT/IT integration according to the ISA-95 model.

05

Develop digital twins of industrial assets.

06

Protect the integration using the principles of IEC 62443.

07

Define a data governance model for implementation.

Profile

Who it's for

  • OT/IT integration architect looking to specialise in Asset Models and OT/IT Integration.
  • Industrial data engineer looking to specialise in Asset Models and OT/IT Integration.
  • Asset management manager looking to specialise in Asset Models and OT/IT Integration.
  • OT cybersecurity engineer looking to specialise in Asset Models and OT/IT Integration.
  • Digital twin specialist looking to specialise in Asset Models and OT/IT Integration.
  • Industrial digital transformation head looking to specialise in Asset Models and OT/IT Integration.
  • Graduates in engineering or science seeking to enter the process industry.
Standards & tools

What you'll work with

  • IEC 62264 (ISA-95, enterprise-control system integration)
  • IEC 62443 (security for automation and control systems)
  • IEC 62541 (OPC UA)
  • ISO 14224 (equipment reliability and maintenance data)
  • ISO 55001 (asset management systems)
  • IEC 63278-1 (Asset Administration Shell)
  • ISO 15926 (plant lifecycle data integration)
Syllabus

8 modules · 800 h

  1. 1.1Concept of asset and asset hierarchy
  2. 1.2ISO 14224 equipment taxonomy standard
  3. 1.3SFI coding and ship structure
  4. 1.4ISO 81346 reference designation standard
  5. 1.5Asset register and master data
  6. 1.6Technical attributes and equipment data sheets
  7. 1.7Functional and physical relationships
  8. 1.8Asset information lifecycle
  9. 1.9Asset management according to ISO 55000
  10. 1.10Practical: asset hierarchy of a propulsion plant
  1. 2.1ISO 15926 for lifecycle integration
  2. 2.2CFIHOS for information delivery
  3. 2.3Industry 4.0 Asset Administration Shell
  4. 2.4DEXPI for process diagrams
  5. 2.5Ontologies and semantic models
  6. 2.6Data dictionaries and classes
  7. 2.7Interoperability between systems
  8. 2.8Digital information handover
  9. 2.9Asset data governance
  10. 2.10Workshop: modelling an equipment item with the Asset Administration Shell
  1. 3.1Naval and offshore automation architecture
  2. 3.2PLC, DCS and SCADA
  3. 3.3Industrial networks and fieldbuses
  4. 3.4Process historians
  5. 3.5Safety instrumented systems (SIS)
  6. 3.6Sensor integration
  7. 3.7Purdue model of levels
  8. 3.8Real-time constraints
  9. 3.9OT systems lifecycle
  10. 3.10Practical: inventory of OT systems on a platform
  1. 4.1OT/IT convergence and challenges
  2. 4.2ISA-95 and interfaces between levels
  3. 4.3OPC UA and information models
  4. 4.4MQTT and Sparkplug
  5. 4.5Edge, fog and cloud architectures
  6. 4.6Middleware and data bus
  7. 4.7Integration with ERP and maintenance management
  8. 4.8Integration with PLM and engineering
  9. 4.9Latency, bandwidth and satellite communications
  10. 4.10Laboratory: OPC UA server with an asset model
  1. 5.1Digital twin: maturity levels
  2. 5.2Physical and data models
  3. 5.3Synchronisation with the real asset
  4. 5.43D visualisation and real-time data
  5. 5.5Operational use cases
  6. 5.6Maintenance use cases
  7. 5.7Digital twin platforms
  8. 5.8Data quality and trust
  9. 5.9Digital twin qualification according to DNV-RP-A204
  10. 5.10Case study: digital twin of an injection pump
  1. 6.1IEC 62443 standard
  2. 6.2IACS UR E26 and E27 rules
  3. 6.3Segmentation into zones and conduits
  4. 6.4Secure remote access
  5. 6.5Vulnerability management
  6. 6.6Security monitoring
  7. 6.7Incident response
  8. 6.8Backup and system recovery
  9. 6.9Staff training in OT cybersecurity
  10. 6.10Practical: analysis of IEC 62443 zones and conduits
  1. 7.1Digital transformation strategy
  2. 7.2Business case and return on investment
  3. 7.3OT/IT organisation and roles
  4. 7.4Supplier management
  5. 7.5Change management in operations
  6. 7.6Integration value indicators
  7. 7.7Scaling across the entire asset fleet
  8. 7.8Lessons learned from industrial projects
  9. 7.9Technology roadmap
  10. 7.10Case study: OT/IT roadmap for an offshore operator
  1. 8.1Asset definition and scope
  2. 8.2Proposed asset model
  3. 8.3OT systems inventory
  4. 8.4Integration architecture
  5. 8.5Data model and interfaces
  6. 8.6Asset digital twin
  7. 8.7Cybersecurity plan
  8. 8.8Implementation plan
  9. 8.9Report and presentation
  10. 8.10Final review with the tutor
Methodology, software & labs

How you'll learn

Fully 100% online training on the SEIUM campus, with downloadable material, recorded lectures and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine study with work.

Each module combines theory, guided reading of the original standard and applied exercises. The working software is AVEVA PI System, Kepware (OPC UA), Node-RED, Azure Digital Twins, SAP PM, in free, academic or evaluation versions. Tests are studied using real procedures from OPC UA integration laboratories, OT/IT maturity assessment and cybersecurity risk analysis by zones and conduits. Assessment is continuous per module, plus the final integrating project.

Accreditable laboratories(EN ISO/IEC 17025) with a rotor test rig, EMC/Lightning pre-compliance, HIL/SIL and vibration/acoustics.
Evidence-oriented final project:safety case, test plan, compliance dossier and operational limits.
Industry mentoring:lecturers with experience in training, , eVTOL/UAM and flight test.
Flexible format(hybrid/online), international cohorts and support from SEIUM Career Services.
Ethics and safety:safety-by-design approach, OT cyber, DIH and compliance as core pillars.
Capstone project

Build it end to end

Your final project follows the real engineering workflow, step by step, reviewed by your tutor.

Asset definition and scope

Build asset models with standardised hierarchies and taxonomies.

Proposed asset model

Apply asset data standards such as ISO 14224 and ISO 15926.

OT systems inventory

Describe the architecture of operational technology systems.

Integration architecture

Design OT/IT integration according to the ISA-95 model.

Data model and interfaces

Develop digital twins of industrial assets.

Career opportunities

Where this takes you

OT/IT integration architectIndustrial data engineerAsset management managerOT cybersecurity engineerDigital twin specialistIndustrial digital transformation head
Admissions & scholarships

Requirements

  • Prior technical training or professional experience in the sector. No university degree is required.
  • Internet connection and a computer capable of running the programme's software.
  • Sufficient level of Spanish to follow technical standards documentation.

Ready to start?

Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.

FAQ

Frequently asked questions

The programme totals 800 hours spread over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with full-time work.

You work with AVEVA PI System, Kepware (OPC UA), Node-RED, Azure Digital Twins and SAP PM. Free, academic or evaluation versions are used, and the tutor indicates the open-source alternative where one exists.

An own diploma from SEIUM on passing continuous assessment and the integrating project. It is in-house training, not an official Ministry qualification.

Yes. Modules passed in a course or postgraduate diploma in the same area can be credited towards the higher programme. Check the credit transfer policy when you enrol.

Postgraduate Diploma in Asset Models and OT/IT IntegrationEnrol
Scroll to Top
SEIUM – Institute of Advanced Engineering
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.