Postgraduate Diploma in Aero Instrumentation: Pressure Taps and Lightweight PIV
Online 800-hour Postgraduate Diploma in Aero Instrumentation: Pressure Taps and Lightweight PIV. 8 modules covering ISO 5167-1, ISO 2186 and PIVlab. Assigned tutor and enrolment open.
Postgraduate Diploma in Aero Instrumentation: Pressure Taps and Lightweight PIV — studying from India
India is one of the world's largest automobile markets, with major manufacturing clusters around Chennai, Pune, Gurugram, Manesar and Sanand. Maruti Suzuki, Tata Motors, Mahindra & Mahindra, Hyundai and Toyota Kirloskar anchor a dense supplier ecosystem of component makers across Chennai and Pune. Vehicle standards and type approvals are handled by the Ministry of Road Transport and Highways and the Automotive Research Association of India, while the Society of Indian Automobile Manufacturers represents the industry. Engineers work on powertrain design, vehicle dynamics, quality validation and motorsport engineering, with demand rising as the industry transitions to new technologies.
Fees for India: ₹137,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are automotive engineers recognised in India, and which bodies matter?
Automotive engineering in India is recognised mainly through the Automotive Research Association of India (ARAI), the Society of Automotive Engineers India (SAE India) and the Institution of Engineers (India). Engineering degrees from recognised universities are the usual entry route. SEIUM's private qualifications are not state degrees and are not accredited by any national body, so their value for membership or roles depends on the employer or body concerned.
Which employers in India hire automotive and motorsport engineers?
Automotive engineers in India are hired by carmakers such as Tata Motors, Mahindra, Maruti Suzuki and Hyundai India, their component suppliers, and design and testing firms. Motorsport teams and racing series also employ engineers. A private online programme can add specialised knowledge to your profile, but employers generally judge candidates on demonstrated skills, projects and experience.
Is this programme workable with a job in India, and does it need a visa?
Yes. The programme is fully online and taught in English, so no student visa is needed to study from home. Workload depends on the format: a master's is about 1,900 hours, a postgraduate diploma about 800 and a specialist course about 300. You get an assigned technical tutor and can pay in instalments. Some employers offer sponsorship, so it is worth asking your HR team before you enrol.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select instrumentation for aerodynamic measurements.
Design pressure tap layouts.
Measure pressures on track with rakes and sensors.
Understand the fundamentals of PIV.
Apply lightweight PIV systems in motorsport.
Process and analyse pressure and velocity data.
Integrate instrumentation into the development process.
Who it's for
- Instrumentation engineer who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Wind tunnel engineer who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Aerodynamicist who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Test technician who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Fluid mechanics researcher who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Metrology engineer who wants to specialise in Aero Instrumentation: Pressure Taps and Lightweight PIV.
- Engineering or science graduates seeking to enter motorsport.
What you'll work with
- ISO 5167-1
- ISO 2186
- IEC 60825-1
- ISO/IEC 17025
- ISO/IEC Guide 98-3
- IEC 62828-1
- SAE J2084
8 modules · 800 h
1.1Static and total pressure measurement1.2Pitot tubes and multi-hole probes1.3Pressure transducers1.4Multichannel pressure scanners1.5Frequency response1.6Range and accuracy1.7Transducer calibration1.8Traceability of sensor calibrations1.9Sensor selection1.10Case study: scanner selection for a model
2.1Pressure tap design2.2Diameter and geometry2.3Tube routing2.4Errors due to tube length2.5Dynamic response correction2.6Integration into manufactured parts2.7Tap distribution2.8Integrating pressure into force2.9Maintenance of actuators and valves2.10Workshop: tap distribution on a wing flap
3.1Track rakes3.2On-board pressure sensors3.3Mounting limitations3.4Real-time measurement3.5Synchronisation with telemetry3.6Correction for conditions3.7Comparison with wind tunnel3.8Mounting safety3.9Data analysis3.10Practice: rake data analysis
4.1Principles of particle image velocimetry4.2Lasers and light sheets4.3Tracer particles and seeding4.4Cameras and synchronisation4.5Cross-correlation algorithms4.6Spatial resolution and interrogation windows4.7Measurement errors4.8Laser safety according to IEC 608254.9Stereoscopic three-component PIV4.10Laboratory: PIV processing with open-source software
5.1Compact and portable PIV systems5.2Illumination with pulsed LED lasers5.3Reduced measurement volumes5.4Wake applications5.5PIV in a motorsport wind tunnel5.6Cost and logistics5.7Data quality5.8Comparison with CFD5.9Limitations of the technique5.10Practice: designing a lightweight PIV test
6.1Data filtering6.2Temporal averaging of fields6.3Vorticity fields6.4Vortex detection6.5Statistical comparison between configurations6.6Visualisation of test results6.7Databases6.8Automation of processing6.9Final results report6.10Case study: wake analysis with PIV
7.1Using data for correlation7.2Improving CFD models7.3Instrumentation planning7.4Costs and logistics of each technique7.5Project management7.6Recording lessons learned7.7Regulatory restrictions on devices7.8Training the test team7.9Continuous improvement cycle for the process7.10Case study: instrumentation plan for a season
8.1Defining objectives8.2Tap design8.3Sensor selection8.4PIV measurement plan8.5Carrying out the tests8.6Data processing8.7Comparison with CFD8.8Final results report8.9Dissertation and presentation8.10Final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The software used is PIVlab, DaVis (LaVision), MATLAB, LabVIEW, Python, in free, academic or evaluation versions. Tests are studied using real procedures for pressure testing in wind tunnels, PIV measurements in wakes and rake measurements on track. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Select instrumentation for aerodynamic measurements.
Design pressure tap layouts.
Measure pressures on track with rakes and sensors.
Understand the fundamentals of PIV.
Apply lightweight PIV systems in motorsport.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total over 6 to 8 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
The course uses PIVlab, DaVis (LaVision), MATLAB, LabVIEW and Python. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are credited towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in Integrated Aerothermal Engineering with Bodywork Aerodynamics
Online 800-hour Postgraduate Diploma in Integrated Aerothermal Engineering with Bodywork Aerodynamics. 8 modules covering FIA Formula 1 Technical Regulations, FIA Formula 1 Sporting Regulations and STAR-CCM+.…
Postgraduate Diploma in Energy per Lap and Degradation Simulation
Online 800 h Postgraduate Diploma in Energy per Lap and Degradation Simulation. 8 modules covering FIA Formula E Technical Regulations, FIA Formula 1 Sporting Regulations and…
Postgraduate Diploma in Multimode Calibration and Driver Driveability
Online 800-hour Postgraduate Diploma in Multimode Calibration and Driver Driveability. 8 modules covering the FIA International Sporting Code, the FIA World Endurance Championship Technical Regulations and…
More in Automotive & Motorsport
All Automotive & Motorsport programmes → · How to apply · Fees & financing · Scholarships