On-orbit servicing operations course
Online course of 300 hours in on-orbit servicing operations, structured in 6 modules covering on-orbit services, client preparation, operations planning, servicing operations, safety, regulation and liability, and a final project, with an assigned technical tutor.
On-orbit servicing operations course — studying from India
India's aerospace sector is growing steadily, anchored by Bengaluru, Hyderabad and the Kanpur-Lucknow belt. Hindustan Aeronautics Limited, Tata Advanced Systems and Bharat Electronics are major employers, alongside a fast-growing base of drone and space start-ups. The Indian Space Research Organisation and the Defence Research and Development Organisation drive research programmes, while civil aviation rules are set by the Directorate General of Civil Aviation. Engineers here work on aircraft systems, unmanned aerial vehicles, satellite subsystems and urban air mobility concepts, and the sector's push for indigenisation keeps demand for skilled talent strong.
Fees for India: ₹57,900 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which professional bodies in India recognise aerospace engineering, and does a private online qualification help with recognition?
In India, aeronautical engineering is recognised mainly through the Institution of Engineers (India), the Aeronautical Society of India and the Directorate General of Civil Aviation for aircraft maintenance licences. SEIUM's qualifications are private, not state degrees, and are not accredited by any national body. Whether they count towards professional membership or roles is decided by the employer or the relevant body, so check their criteria before enrolling.
Which employers in India hire aerospace engineers, and how would this programme be used in that work?
Aerospace engineers in India work with organisations such as ISRO, HAL, DRDO laboratories, and private aerospace and drone firms, along with MRO and airline engineering teams. A private postgraduate qualification can support a career move or specialisation, but it is not a substitute for formal technical experience or statutory certifications. Employers usually weigh it alongside your work record and skills.
Can I manage this programme alongside a full-time job in India, given the time zone and language?
The programme is 100% online and taught in English, so you can study from home without a student visa. Classes and deadlines are set by the school, so check the schedule against India Standard Time (IST). Master's programmes are around 1,900 hours, postgraduate diplomas around 800 and specialist courses around 300, so plan your weekly hours realistically. You get an assigned technical tutor. Ask your employer about sponsorship, as instalment fees may make this easier.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the types of on-orbit services and their business models.
Specify servicing interfaces on client satellites.
Plan capture, servicing and release operations.
Manage contingencies during proximity operations.
Apply the regulatory and liability framework.
Assess technical and operational risks.
Develop the concept of operations for a servicing mission.
Who it's for
- Space operations engineers.
- Servicing mission managers.
- Mission safety engineers.
- Space robotics engineers.
- Space regulation consultants.
- Space business analysts evaluating servicing markets.
- Engineering or science graduates aiming to enter on-orbit servicing.
What you'll work with
- ISO 24330 (rendezvous and proximity operations (RPO) and on-orbit servicing (OOS): programmatic principles and practices)
- CONFERS principles and practices (recommended practices for on-orbit servicing and rendezvous)
- ECSS-E-ST-70C (ground systems and operations)
- ECSS-E-ST-70-11C (space segment operability)
- ISO 24113 (space debris mitigation requirements)
- UN LTS Guidelines (2019) (guidelines for the long-term sustainability of outer space activities)
- Outer Space Treaty (1967) (founding treaty of international space law)
- International Docking System Standard (IDSS) (interface definition for spacecraft docking systems)
- Ansys STK
- Yamcs
- Basilisk
- GMAT
- Orekit
6 modules
1.1Definition and types of services1.2Life extension and towing1.3In-orbit refuelling1.4Inspection and diagnosis1.5Repair and module replacement1.6MEV-1 and MEV-2 missions1.7Business models1.8Technical and operational challenges1.9In-orbit inspection services1.10Workshop: analysis of on-orbit servicing use cases
2.1Design for servicing2.2Capture interfaces2.3Refuelling ports2.4Visual markers2.5Client data for servicing2.6Agreements between operators2.7Legacy satellites not prepared for servicing2.8Information requirements2.9Cooperation with existing clients2.10Practical exercise: specification of servicing interfaces
3.1Concept of operations3.2Phases of the servicing mission3.3Coordination between control centres3.4Communication windows and constraints3.5Capture procedures3.6Contingency management3.7Training simulations3.8Planning of the docked stack3.9Planning of approach manoeuvres3.10Lab: operations timeline for a servicing mission
4.1Refuelling and fluid transfer4.2Robotic operations4.3Camera inspection4.4Attitude control of the stack4.5Towing and reorbiting4.6Client release4.7Operations with multiple clients4.8Shared telemetry4.9Separation and departure from the stack4.10Case study: control of a docked stack in GEO
5.1Safety in proximity operations5.2Transparency and notification5.3Licences and authorisations5.4Liability between operators5.5Space insurance5.6Standards and good practice5.7Debris mitigation5.8Dual-use aspects5.9Operator transparency policies5.10Case study: safety plan for a life extension mission
6.1Client selection6.2Servicing concept6.3Mission operational sequence6.4Capture plan6.5Contingency plan6.6Regulatory framework6.7Risk analysis6.8Business model6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so the programme can be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Ansys STK, Yamcs, Basilisk, GMAT and Orekit, in free, academic or evaluation versions. Testing is studied through real procedures: operations planning for a life extension mission, contingency analysis during capture and regulatory assessment of an on-orbit service. Assessment is continuous by module, plus the final integrating project.
Standards covered: ISO 24330, CONFERS principles and practices, ECSS-E-ST-70C, ECSS-E-ST-70-11C, ISO 24113, UN LTS Guidelines (2019), Outer Space Treaty (1967), International Docking System Standard (IDSS).
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Ansys STK, Yamcs, Basilisk, GMAT, Orekit, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need an internet connection, a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
3D Metrology Course for Aircraft
Online course of 300 hours in 3D metrology for aircraft: 6 modules covering aerospace dimensional metrology, coordinate measuring machines, portable large-volume metrology, 3D scanning and non-contact…
TT&C (Telemetry and Control) Course
Online course of 300 hours in TT&C (telemetry, tracking and command): 6 modules covering TT&C subsystem architecture, modulation and coding, space data protocols, tracking and ranging,…
DO-254 Course for Critical Hardware
Online course of 300 hours in DO-254 for critical hardware. 6 modules covering complex electronic hardware in aviation, hardware planning, the design process, validation and verification,…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships