ISO/IEC Course in Energy Network Protection
Online 300 h course in ISO/IEC in energy network protection. 6 modules covering IEC 62351 (power system communications security), IEC 62443 (industrial automation and control systems security) and Wireshark. Assigned tutor and open enrolment.
ISO/IEC Course in Energy Network Protection — studying from India
India's defence sector is a major engineering employer, with public undertakings such as Bharat Electronics, Hindustan Aeronautics, Bharat Dynamics and Bharat Earth Movers, alongside private firms like Tata Advanced Systems and Larsen & Toubro. Research and development is coordinated by the Defence Research and Development Organisation, and procurement and capability planning sit within the Ministry of Defence. Engineers work on land systems, armoured vehicles, weapon platforms and military electronics, with a strong policy push towards indigenous design and manufacturing under the Make in India initiative.
Fees for India: ₹47,500 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are defence and military engineers recognised in India?
Defence engineering in India is largely recognised through government channels such as DRDO, the Ministry of Defence, and the armed forces' engineering branches, with recruitment governed by public service rules. The Institution of Engineers (India) is the general professional body. SEIUM's qualifications are private and not accredited by any national body, so recognition is decided by the employer or relevant authority.
Which employers in India hire defence and land systems engineers?
Employers include DRDO laboratories, Ordnance Factory Board units, defence public sector undertakings such as BEL and HAL, and private defence manufacturers. Military engineering roles are filled through official recruitment. A private online qualification can add technical depth, but government and defence employers mainly assess formal qualifications, security clearance and experience.
Is this programme workable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so no student visa is needed if you study from India. Time required is about 300 hours for specialist courses, 800 for diplomas and 1,900 for master's programmes. You get an assigned technical tutor, and fees can be paid in instalments. Ask your employer about sponsorship, since many defence firms fund further training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the threats specific to energy control systems.
Interpret the European regulatory framework for cybersecurity and resilience.
Design architectures segmented by zones and conduits.
Apply security mechanisms in substation protocols.
Configure detection and response capabilities in OT networks.
Manage cybersecurity risk across the asset lifecycle.
Develop a protection plan for an energy network.
Who it's for
- OT cybersecurity engineer who wants to specialise in ISO/IEC in energy network protection.
- Security analyst in an operations centre who wants to specialise in ISO/IEC in energy network protection.
- Security manager for critical infrastructure who wants to specialise in ISO/IEC in energy network protection.
- Energy regulatory compliance consultant who wants to specialise in ISO/IEC in energy network protection.
- Secure industrial network architect who wants to specialise in ISO/IEC in energy network protection.
- Security auditor for control systems who wants to specialise in ISO/IEC in energy network protection.
- Engineering or science graduates looking to enter electricity transmission and distribution.
What you'll work with
- IEC 62351 (power system communications security)
- IEC 62443 (industrial automation and control systems security)
- Directive (EU) 2022/2555 (NIS2)
- ISO/IEC 27019 (information security in the energy sector)
- Directive (EU) 2022/2557 (resilience of critical entities)
- NERC CIP (protection of critical electricity infrastructure)
- IEC 61850 (substation communication)
6 modules · 300 h
1.1Particularities of operational technology compared with information technology1.2Architecture of a network control system1.3Industrial protocols and their original security1.4Threats specific to the electricity sector1.5Documented incidents and their lessons1.6Physical consequences of a logical attack1.7Actors and motivations1.8Sector vocabulary1.9Reference standards and guides1.10Exercise: mapping the assets of a substation
2.1Security standard for automation and control systems2.2Security levels and their assignment2.3Information security management system2.4European directive on the resilience of critical entities2.5Obligations of essential service operators2.6Mandatory incident notification2.7Requirements for the electricity system operator2.8Product and process certification2.9Auditing and supervision by the authority2.10Practice: mapping the obligations of an operator
3.1Zones and conduits as a design model3.2Network segmentation and industrial firewalls3.3Data diodes and unidirectional flows3.4Remote access for suppliers and its control3.5Identity and privilege management3.6Hardening of equipment and services3.7Encrypted and authenticated communications3.8Time synchronisation and its protection3.9Redundancy and control continuity3.10Practice: designing the segmentation of a plant
4.1Industrial network monitoring4.2Process anomaly detection4.3Event correlation and the operations centre4.4Incident response plan4.5Isolation and operation in degraded mode4.6Manual operation and backup procedures4.7Configuration backups4.8Recovery and return to normal operation4.9Forensic analysis in industrial environments4.10Practice: incident simulation at a substation
5.1Industrial cybersecurity risk assessment5.2Joint analysis of physical and logical security5.3Vulnerability and patch management in operation5.4Maintenance windows and testing5.5Supply chain security5.6Cybersecurity requirements in procurement5.7Equipment obsolescence management5.8Training and awareness for operations staff5.9Indicators and internal audit5.10Practice: risk assessment of a control system
6.1Choice of energy facility6.2Inventory of assets and flows6.3Risk assessment and security levels6.4Design of the secure architecture6.5Monitoring and response plan6.6Vulnerability management programme6.7Cybersecurity requirements for suppliers6.8Training and exercise plan6.9Cybersecurity plan report6.10Project defence
How you'll learn
Fully 100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it easy to combine with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Wireshark, Zeek, Splunk, Nozomi Networks Guardian, in free, academic or evaluation versions. Tests are studied using real procedures from a digital substation laboratory, incident response exercises and NIS2 compliance audits. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the threats specific to energy control systems.
Interpret the European regulatory framework for cybersecurity and resilience.
Design architectures segmented by zones and conduits.
Apply security mechanisms in substation protocols.
Configure detection and response capabilities in OT networks.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Spanish language level sufficient to follow technical standards reading.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme is 300 hours in total, spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme works with Wireshark, Zeek, Splunk, Nozomi Networks Guardian. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Check the recognition policy when you enrol.
Related programmes
ISO/IEC 27001 Course in Military Environments
Online course of 300 h in ISO/IEC 27001 in military environments. 6 modules covering ISO/IEC 27001:2022 (information security management), ISO/IEC 27002:2022 (security controls) and PILAR (CCN).…
ISO Course in Drinking Water and Water Treatment for Bases
Online 300 h course in ISO on drinking water and water treatment for bases. 6 modules covering Directive (EU) 2020/2184 (water intended for human consumption), Royal…
Course in Ethics in Distributed Defence Networks
Online course of 300 hours in ethics in distributed defence networks. 6 modules covering defence network infrastructure, cyber defence and ethics, data and surveillance on the…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships