Ethics in Academic Use of Simulators Course
Online 300-hour course in ethics in the academic use of simulators. 6 modules covering ANSI/ANS-10.4 (verification and validation of scientific software), Directive 2009/24/EC (legal protection of computer programs) and Moodle. Personal tutor assigned and enrolment open.
Ethics in Academic Use of Simulators Course — studying from India
India's nuclear programme is state-led and centred on the Department of Atomic Energy, with operations managed by the Nuclear Power Corporation of India and research carried out at the Bhabha Atomic Research Centre. Reactor sites are located at places such as Tarapur, Kakrapar, Kudankulam and Rawatbhata. Regulation is handled by the Atomic Energy Regulatory Board, which sets safety standards for reactors and fuel facilities. Engineers in this field work on reactor systems, fuel cycle technologies, radiation safety and materials, with expertise supported by institutions such as the Indira Gandhi Centre for Atomic Research.
Fees for India: ₹84,500 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Who regulates nuclear engineering work in India and does this course satisfy them?
The Atomic Energy Regulatory Board (AERB) regulates nuclear safety in India, and the Department of Atomic Energy runs the sector. SEIUM's qualification is private, not an official degree, and is not accredited by any national body. It does not satisfy any regulatory requirement, and AERB or the employer will decide what qualifications they require.
Which Indian employers work in nuclear engineering and the fuel cycle?
Public sector nuclear organisations and their associated industries are the main employers, and entry normally follows government recruitment and vetting processes. Private employers in the sector also exist. Because hiring is tightly controlled, a private online qualification is unlikely to be the deciding factor, and recognition depends on the employer.
Is this programme workable with a job in India, and how is it funded?
The programme is online and taught in English, so you can study from home across India without a student visa. Each student is assigned a technical tutor and completes a final project. Fees are payable in instalments, and employer sponsorship is possible, which is often the practical route for working engineers.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the use of simulators in nuclear engineering teaching.
Apply principles of teaching ethics to the use of simulations.
Interpret the licences, ownership and export control of calculation codes.
Evaluate the validity of academic results obtained with simulators.
Design accessible and inclusive materials based on simulation.
Promote academic integrity in work involving calculation tools.
Develop a responsible academic practice with a simulator.
Who it's for
- Nuclear engineering lecturer wishing to specialise in Ethics in Academic Use of Simulators.
- Instructional designer wishing to specialise in Ethics in Academic Use of Simulators.
- Teaching laboratory manager wishing to specialise in Ethics in Academic Use of Simulators.
- Academic software licence manager wishing to specialise in Ethics in Academic Use of Simulators.
- Digital accessibility technician wishing to specialise in Ethics in Academic Use of Simulators.
- Teaching innovation researcher wishing to specialise in Ethics in Academic Use of Simulators.
- Engineering or science graduates seeking to enter universities.
What you'll work with
- ANSI/ANS-10.4 (verification and validation of scientific software)
- Directive 2009/24/EC (legal protection of computer programs)
- Royal Legislative Decree 1/1996 (Intellectual Property Law)
- Regulation (EU) 2021/821 (control of dual-use items)
- EN 301 549 (accessibility of ICT products and services)
- Directive (EU) 2016/2102 (accessibility of public sector websites)
- WCAG 2.2 (guidelines on web content accessibility)
6 modules · 300 h
1.1IAEA educational simulators: PCTRAN and generic PWR1.2Research reactor simulators1.3System codes in university courses1.4Virtual and remote laboratories1.5Research reactors with remote access1.6Simulation-based learning1.7Learning objectives and curriculum design1.8Pedagogical limitations of simulators1.9Comparison with real practicals1.10Case study: integrating a simulator into a course
2.1Honesty about simulator fidelity2.2Avoiding false certainties in students2.3Critical thinking versus the black box2.4Equity of access to resources2.5Fair assessment in simulated environments2.6Plagiarism and copying of simulation results2.7Students' use of generative AI2.8Academic integrity in virtual practicals2.9Lecturer responsibility2.10Workshop: an ethical rubric for a simulator-based practical
3.1Academic licences for nuclear codes3.2Distribution of codes through RSICC and the NEA Data Bank3.3Export control of nuclear software3.4Compliance with licence agreements3.5Open-source software: OpenMC and MOOSE3.6Proprietary design data3.7International students and restrictions3.8Commercial use of academic licences3.9Institutional responsibility3.10Practical: reviewing an academic licence agreement
4.1Model verification in bachelor's final projects4.2Use outside the range of validity4.3Communicating uncertainties in theses4.4Reproducibility of simulations4.5Documenting inputs and versions4.6Student results in publications4.7Common errors of novice users4.8Internal peer review4.9Sensitive data in academic work4.10Case study: reviewing a Master's thesis with doubtful results
5.1Accessibility of simulation interfaces5.2Digital divide and computing resources5.3Teaching in countries without reactors5.4ENEN and IAEA educational programmes5.5Gender perspective in nuclear teaching5.6Student wellbeing in accident simulations5.7Sustainability of intensive computing5.8Collaboration with industry5.9Teacher training5.10Workshop: an accessibility plan for a virtual laboratory
6.1Defining learning objectives6.2Selecting the simulator and licences6.3Designing the practical6.4Analysis of limitations and fidelity6.5Assessment criteria and integrity6.6Accessibility measures6.7Ethical review of the proposal6.8Summary of conclusions6.9Report and presentation6.10Final review with the tutor
How you'll learn
A 100 % online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetable: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Moodle, OpenMC, IAEA Basic Principles simulators, Python (Jupyter), in free, academic or evaluation versions. Case studies are drawn from real procedures for designing teaching practicals with a simulator, reviewing licences for calculation codes and assessing the accessibility of materials. Assessment is continuous per module plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the use of simulators in nuclear engineering teaching.
Apply principles of teaching ethics to the use of simulations.
Interpret the licences, ownership and export control of calculation codes.
Evaluate the validity of academic results obtained with simulators.
Design accessible and inclusive materials based on simulation.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme's software.
- A sufficient level of Spanish to follow technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with a full-time job.
We work with Moodle, OpenMC, IAEA Basic Principles simulators, Python (Jupyter). Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma upon passing continuous assessment and the integrating project. This is in-house training, not an official Ministry qualification.
Yes. Modules passed in a Course or Postgraduate Diploma in the same area are recognised towards the advanced programme. Please check the recognition policy when you enrol.
Related programmes
Course on Academic Models in Inertial Confinement
Online course of 300 h in Academic Models in Inertial Confinement. 6 modules covering ASME V&V 20 (verification and validation in computational modelling), ANSI/ANS-10.4 (verification and…
Course on Autonomous Robots for Nuclear Inspection
Online course of 300 h in Autonomous Robots for Nuclear Inspection. 6 modules covering UL 4600 (safety of autonomous products), IEEE 7001 (transparency of autonomous systems)…
Fusion Plasma Diagnostics Course
Online 300-hour course in fusion plasma diagnostics. 6 modules covering the ITER Plant Control Design Handbook (PCDH), IEC 60825-1 (laser product safety) and IMAS (ITER). Assigned…
More in Nuclear Engineering & Nuclear Fuel Cycle Technologies
All Nuclear Engineering & Nuclear Fuel Cycle Technologies programmes → · How to apply · Fees & financing · Scholarships