Diploma in Visible Vortex Management and Flow Features in Bodywork
Online postgraduate diploma of 800 hours in managing visible vortices and flow features on vehicle bodies, structured in 8 modules covering flow structures, visible flow effects, experimental visualisation, flow and particle simulation, aerodynamic noise, vortex control and design integration, with an assigned technical tutor.
Diploma in Visible Vortex Management and Flow Features in Bodywork — studying from India
Product design and human-machine interface work is growing across India, from consumer electronics and automotive interiors to industrial equipment and medical devices. Design centres in Bengaluru, Pune, Chennai and Gurugram serve global brands as well as domestic manufacturers. Engineers and designers in this area combine mechanical design, usability research and digital interface development. Standards for usability and product quality are referenced through the Bureau of Indian Standards, and the National Institute of Design in Ahmedabad is a well-known training institution for product and industrial designers.
Fees for India: ₹137,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which bodies in India recognise design and HMI professionals?
Design in India is not licensed, so recognition comes through professional and academic bodies. These include the Indian Institute of Design network, the Design Council of India and the Usability Professionals' Association India chapter. SEIUM's private qualifications are not state degrees and are not accredited by any national body, so employers decide how much weight to give them.
Which employers in India hire HMI and product designers?
Hirers include consumer electronics and automotive firms, software and app companies, fintech and e-commerce platforms, and design consultancies in Bengaluru, Mumbai, Pune and Delhi NCR. A private online programme can strengthen your profile, but employers mainly assess your design portfolio, user research work and tool skills.
Can I manage this with a job in India, and what language level is needed?
The programme is entirely online and taught in English, so good written and spoken English is needed. You can study from India without a student visa. Specialist courses take around 300 hours, diplomas 800 and master's about 1,900. Schedules follow IST, and you have an assigned technical tutor. Fees are payable in instalments, and some employers offer sponsorship, so ask yours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the vortex structures around a vehicle.
Relate vortices to soiling, rain and visibility.
Plan flow visualisation tests in the wind tunnel.
Simulate droplets, water films and wakes with CFD.
Diagnose aerodynamic noise sources associated with vortices.
Design geometric countermeasures integrated into the body.
Communicate flow-driven requirements to the design studio.
Who it's for
- Vehicle aerodynamics engineers.
- Body CFD specialists.
- Wind tunnel test engineers.
- Aeroacoustics engineers.
- Technical exterior designers.
- Water management engineers.
- Engineering or science graduates seeking to enter the automotive industry.
What you'll work with
- SAE J1252 (wind tunnel test practices)
- UNECE Regulation No. 46 (devices for indirect vision)
- Regulation (EU) No 1008/2010 (windscreen wiper and washer systems)
- Regulation (EU) No 672/2010 (windscreen defrosting and demisting)
- UNECE Regulation No. 43 (safety glazing)
- ISO 362-1:2022 (noise emitted by accelerating vehicles)
- UNECE Regulation No. 26 (external projections)
- Simcenter STAR-CCM+
- PowerFLOW
- OpenFOAM
- ParaView
- Ansys Fluent
8 modules
1.1Vorticity and circulation1.2Longitudinal A-pillar vortices1.3Rear window vortices and C-pillar flow1.4Separation and recirculation1.5Near and far wake of the vehicle1.6Underbody and wheel flow1.7Interaction between structures1.8Q and lambda-2 criteria for vortex identification1.9Scales and Reynolds number1.10Workshop: identifying vortices in a CFD result
2.1Soiling of side windows and mirrors2.2Raindrops and water management2.3Wheel spray and splash2.4Dirt build-up on tailgate and cameras2.5Ice and snow on sensors2.6Condensation and misting2.7Effects on visibility and safety2.8Contamination of ADAS sensors2.9Soiling acceptance criteria2.10Practical exercise: diagnosing side soiling
3.1Wool tufts in the wind tunnel3.2Flow paint and oil3.3Smoke and laser sheets3.4PIV in the wind tunnel3.5Soiling tests with fluorescent tracers3.6Rain tests in a climatic tunnel3.7Pressure probes and wall taps3.8Photography and test recording3.9Comparing testing and simulation3.10Lab: planning a tracer test
4.1RANS, DES and LES models4.2Meshing styling geometries4.3Lagrangian droplet simulation4.4Water films on surfaces4.5Aerodynamic noise models4.6Post-processing with isosurfaces and streamlines4.7Transient wake simulation4.8Correlation with tests4.9Computational cost and strategies4.10Case study: droplet simulation on a side window
5.1Wind noise sources5.2Mirror and A-pillar noise5.3Joint and seal noise5.4Whistles and tonal noise5.5The Ffowcs Williams-Hawkings analogy5.6Aeroacoustic wind tunnel testing5.7Microphone arrays and beamforming5.8Acoustic comfort criteria5.9Shape countermeasures5.10Workshop: source identification with beamforming
6.1Vortex generators and fins6.2Gutters and drip edges6.3Mirror geometry and housings6.4Rear window edges and spoilers6.5Adjusting pillar radii6.6Air curtains in wheel arches6.7Diffusers and deflectors6.8Aesthetic integration of devices6.9Validating countermeasures6.10Practical exercise: mirror redesign to reduce soiling
7.1Communicating flow structures to the studio7.2Flow indicators for styling decisions7.3Visibility and homologation requirements7.4Trade-offs with aerodynamics and aesthetics7.5Shape iterations with CFD7.6Documenting solutions7.7Lessons learned from vehicles in service7.8Customer complaints and warranty7.9Benchmarking competitor solutions7.10Case study: flow features report for a design review
8.1Selecting the study area8.2Diagnosing the current flow8.3Baseline simulation8.4Proposing countermeasures8.5Aesthetic integration of countermeasures8.6Comparative evaluation of countermeasures8.7Experimental validation plan8.8Impact analysis on overall aerodynamics8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is delivered 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, making it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Simcenter STAR-CCM+, PowerFLOW, OpenFOAM, ParaView, Ansys Fluent, in free, academic or evaluation versions. Tests are studied on real procedures: diagnosing side window and sensor soiling, simulating droplets and water films, and redesigning mirrors and pillars for vortex control. Assessment is continuous by module plus the final capstone project.
Standards covered: SAE J1252, UNECE Regulation No. 46, Regulation (EU) No 1008/2010, Regulation (EU) No 672/2010, UNECE Regulation No. 43, ISO 362-1:2022, UNECE Regulation No. 26.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Simcenter STAR-CCM+, PowerFLOW, OpenFOAM, ParaView and Ansys Fluent, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in PBR Materials and Lighting for Executive Rendering
Online postgraduate diploma of 800 hours in PBR materials and lighting for executive rendering: 8 modules covering physically based rendering, PBR material models, scanned textures and…
Diploma in Cabin Thermal Management and Occupant Wellbeing
Online postgraduate diploma of 800 hours in cabin thermal management and occupant well-being: 8 modules covering occupant thermophysiology, cabin thermal loads, climate control systems, local comfort,…
Diploma in HMI Integration↔Interior Lighting and Signage
Online postgraduate diploma of 800 hours in HMI↔interior light integration and signage: 8 modules covering interior light as an interface, cabin signage and symbols, light and…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships