Diploma in Validation of RAM and Ballistic Materials
Online postgraduate diploma of 800 hours in the validation of radar-absorbing (RAM) and ballistic materials, with 8 modules covering radar-absorbing materials, electromagnetic characterisation, reflectivity and RCS measurement, ballistic validation, environmental durability, multifunctional materials and test quality, applying STANAG 2920, MIL-STD-810H and ASTM D5568, with an assigned technical tutor.
Diploma in Validation of RAM and Ballistic Materials — studying from India
India's defence sector is a major engineering employer, with public undertakings such as Bharat Electronics, Hindustan Aeronautics, Bharat Dynamics and Bharat Earth Movers, alongside private firms like Tata Advanced Systems and Larsen & Toubro. Research and development is coordinated by the Defence Research and Development Organisation, and procurement and capability planning sit within the Ministry of Defence. Engineers work on land systems, armoured vehicles, weapon platforms and military electronics, with a strong policy push towards indigenous design and manufacturing under the Make in India initiative.
Fees for India: ₹159,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are defence and military engineers recognised in India?
Defence engineering in India is largely recognised through government channels such as DRDO, the Ministry of Defence, and the armed forces' engineering branches, with recruitment governed by public service rules. The Institution of Engineers (India) is the general professional body. SEIUM's qualifications are private and not accredited by any national body, so recognition is decided by the employer or relevant authority.
Which employers in India hire defence and land systems engineers?
Employers include DRDO laboratories, Ordnance Factory Board units, defence public sector undertakings such as BEL and HAL, and private defence manufacturers. Military engineering roles are filled through official recruitment. A private online qualification can add technical depth, but government and defence employers mainly assess formal qualifications, security clearance and experience.
Is this programme workable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so no student visa is needed if you study from India. Time required is about 300 hours for specialist courses, 800 for diplomas and 1,900 for master's programmes. You get an assigned technical tutor, and fees can be paid in instalments. Ask your employer about sponsorship, since many defence firms fund further training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand how radar-absorbing materials work.
Measure electromagnetic properties using standardised methods.
Assess the reflectivity of samples and their contribution to RCS.
Plan ballistic validation tests according to STANAG and NIJ.
Analyse the environmental durability of protection materials.
Evaluate multifunctional materials and their design trade-offs.
Ensure the quality and traceability of validation campaigns.
Who it's for
- Materials test engineers.
- Electromagnetic characterisation specialists.
- Ballistic laboratory managers.
- Defence quality engineers.
- Multifunctional materials researchers.
- Anechoic chamber technicians.
- Engineering or science graduates seeking to enter the defence sector.
What you'll work with
- STANAG 2920 (ballistic test method for personal armour materials)
- MIL-STD-810H (environmental engineering and laboratory tests)
- ASTM D5568 (permittivity and permeability by waveguide)
- NIJ Standard 0101.07 (ballistic resistance of body armour)
- ISO/IEC 17025:2017 (competence of testing laboratories)
- AQAP-2110 (NATO quality assurance requirements)
- IEEE Std 1128-1998 (evaluation of RF absorbers)
- MIL-STD-662F (V50 ballistic test for armour)
- Keysight N1500A
- CST Studio Suite
- Ansys HFSS
- MATLAB
8 modules
1.1Interaction of waves with materials1.2Complex permittivity and permeability1.3Salisbury screens and Jaumann absorbers1.4Magnetic ferrite absorbers1.5Graded broadband absorbers1.6Dielectric and magnetic losses1.7Relationship between thickness and frequency1.8Structural absorbing composites1.9The Rozanov limit1.10Practical exercise: reflectivity of a layer on a metal plate
2.1Transmission line and waveguide methods2.2The Nicolson-Ross-Weir algorithm2.3Free-space measurement2.4Resonant cavity2.5Vector network analysers2.6TRL calibration2.7Measurement according to ASTM D55682.8Measurement uncertainty2.9Temperature dependence2.10Lab: permittivity in a waveguide
3.1NRL reflectivity arch3.2Anechoic chambers3.3Compact range3.4Monostatic and bistatic measurements3.5Scale testing3.6ISAR image processing3.7Background subtraction3.8Comparison with simulation3.9Evaluation of absorbers according to IEEE 11283.10Case study: reflectivity analysis of a sample
4.1Standardised threats4.2V50 and V0 velocities4.3STANAG 2920 procedures4.4NIJ 0101.07 classification4.5Backing material4.6Specimen conditioning4.7Test statistics4.8Fragment simulating projectiles4.9Laboratory safety4.10Practical exercise: V50 test matrix
5.1MIL-STD-810H methods5.2Thermal ageing5.3Humidity and water absorption5.4Salt fog5.5Ultraviolet radiation5.6Rain erosion5.7Thermal cycling5.8Effect on electromagnetic and ballistic properties5.9Accelerated testing and extrapolation5.10Workshop: ageing plan with before-and-after measurements
6.1Composites with structural and absorbing functions6.2Integration of protection and low signature6.3Carbon and ferrite fillers6.4Absorbing metamaterials6.5Manufacturing processes6.6Trade-offs between weight, protection and signature6.7In-service repairability6.8Combined testing6.9Multiphysics modelling6.10Case study: multifunctional panel for a vehicle
7.1ISO/IEC 17025 accreditation7.2AQAP-2110 requirements7.3Production lot control7.4Acceptance testing7.5Statistical sampling7.6Test documentation7.7Non-conformities7.8Customer audits7.9Data integrity7.10Case study: lot inspection plan
8.1Definition of the material and its application8.2Electromagnetic and ballistic requirements8.3Selection of test methods8.4Sampling plan8.5Environmental ageing plan8.6Uncertainty analysis8.7Acceptance criteria8.8Validation report8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
Delivered 100% online on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Keysight N1500A, CST Studio Suite, Ansys HFSS and MATLAB, in free, academic or evaluation versions. Case studies are based on real procedures: reflectivity measurement with the NRL arch, V50 ballistic limit tests and accelerated ageing in a climatic chamber. Assessment is continuous by module, plus the final integrated project.
Standards covered: STANAG 2920, MIL-STD-810H, ASTM D5568, NIJ Standard 0101.07, ISO/IEC 17025:2017, AQAP-2110, IEEE Std 1128-1998, MIL-STD-662F.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Keysight N1500A, CST Studio Suite, Ansys HFSS and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in International Law and Ethics in War Medicine
Online postgraduate diploma of 800 hours in international law and ethics in war medicine, structured in 8 modules covering international humanitarian law in healthcare, medical ethics…
Postgraduate Diploma in NATO Standards for Land Powerpacks
Online 800-hour Postgraduate Diploma in NATO standards for Land Powerpacks. 8 modules covering STANAG 1135 (interchangeability of fuels and lubricants), MIL-STD-1275E (28 V electrical systems in…
Diploma in International PRA Regulations (IAEA/NRC/ASN)
Online postgraduate diploma of 800 hours in international PRA regulations (IAEA/NRC/ASN). 8 modules covering nuclear safety and risk, international regulatory frameworks, Level 1, 2 and 3…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships