Diploma in Structural Materials for Combat Aviation
Online postgraduate diploma of 800 hours in structural materials for combat aviation: 8 modules covering structural requirements, aluminium alloys, titanium, steels and superalloys, polymer-matrix composites, fatigue and damage tolerance, testing and advanced materials, under MMPDS, CMH-17 and MIL-STD-1530D, with an assigned technical tutor.
Diploma in Structural Materials for Combat Aviation — studying from India
India's defence sector is a major engineering employer, with public undertakings such as Bharat Electronics, Hindustan Aeronautics, Bharat Dynamics and Bharat Earth Movers, alongside private firms like Tata Advanced Systems and Larsen & Toubro. Research and development is coordinated by the Defence Research and Development Organisation, and procurement and capability planning sit within the Ministry of Defence. Engineers work on land systems, armoured vehicles, weapon platforms and military electronics, with a strong policy push towards indigenous design and manufacturing under the Make in India initiative.
Fees for India: ₹190,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are defence and military engineers recognised in India?
Defence engineering in India is largely recognised through government channels such as DRDO, the Ministry of Defence, and the armed forces' engineering branches, with recruitment governed by public service rules. The Institution of Engineers (India) is the general professional body. SEIUM's qualifications are private and not accredited by any national body, so recognition is decided by the employer or relevant authority.
Which employers in India hire defence and land systems engineers?
Employers include DRDO laboratories, Ordnance Factory Board units, defence public sector undertakings such as BEL and HAL, and private defence manufacturers. Military engineering roles are filled through official recruitment. A private online qualification can add technical depth, but government and defence employers mainly assess formal qualifications, security clearance and experience.
Is this programme workable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so no student visa is needed if you study from India. Time required is about 300 hours for specialist courses, 800 for diplomas and 1,900 for master's programmes. You get an assigned technical tutor, and fees can be paid in instalments. Ask your employer about sponsorship, since many defence firms fund further training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Define the structural requirements of highly manoeuvrable aircraft.
Select metallic alloys according to the loads involved.
Design composite laminates.
Apply fracture mechanics and damage tolerance.
Plan characterisation tests according to the test pyramid.
Evaluate advanced materials and their sustainability.
Develop a complete structural component.
Who it's for
- Aeronautical materials engineers.
- Structural engineers.
- Composites specialists.
- Non-destructive testing engineers.
- Damage tolerance engineers.
- Aeronautical manufacturing engineers.
- Engineering or science graduates aiming to move into the aeronautical sector.
What you'll work with
- MMPDS (Metallic Materials Properties Development and Standardization)
- CMH-17 (Composite Materials Handbook)
- MIL-STD-1530D (Aircraft Structural Integrity Program)
- ASTM D3039 (tensile properties of polymer-matrix composites)
- ASTM E647 (fatigue crack growth rates)
- ASTM D7136 (drop-weight impact damage resistance of composites)
- MIL-HDBK-6870 (non-destructive inspection programme requirements for aircraft)
- Abaqus
- Ansys Granta Selector
- NASGRO
- ANSYS Composite PrepPost
- MATLAB
8 modules
1.1Loads on highly manoeuvrable aircraft1.2Load factors and flight envelope1.3Stiffness versus weight1.4Damage tolerance1.5Thermal environments1.6Influence of radar signature on materials1.7Material selection criteria1.8Ashby charts1.9Cost and availability1.10Case study: material selection for a spar
2.12xxx and 7xxx series2.2Aluminium-lithium alloys2.3Heat treatments and tempers2.4Corrosion and surface protection2.5Fatigue behaviour2.6Forming and machining2.7Riveted joints and friction stir welding2.8Fuselage applications2.9MMPDS design data2.10Laboratory: tensile testing of specimens
3.1Ti-6Al-4V alloy3.2Titanium microstructures3.3Forging and superplastic forming3.4Additive manufacturing of titanium3.5Nickel superalloys3.6Ultra-high-strength steels3.7Hydrogen embrittlement3.8Materials for hot zones3.9Life-cycle cost3.10Practical exercise: metallographic analysis of titanium
4.1High-modulus carbon fibres4.2Epoxy and bismaleimide resins4.3PEEK and PEKK thermoplastics4.4Laminates and stacking sequences4.5Autoclave and out-of-autoclave curing4.6Resin transfer moulding4.7Manufacturing defects4.8Classical laminate theory4.9Laminate failure criteria4.10Workshop: designing a laminate
5.1S-N curves5.2Fracture mechanics5.3Crack growth5.4ASIP programme according to MIL-STD-15305.5Load spectra5.6Inspection intervals5.7Impact damage in composites5.8Structural repairs5.9Fleet life extension5.10Case study: crack growth with NASGRO
6.1ASTM test standards6.2The test pyramid6.3Building-block approach6.4CMH-17 data6.5A- and B-basis allowables6.6Hot/wet environment testing6.7Ultrasonic inspection6.8Thermography and radiography6.9Materials certification6.10Practical exercise: ultrasonic inspection of a panel
7.1Ceramics and ceramic-matrix composites7.2Nanomaterials in structures7.3Multifunctional materials7.4Smart structures7.5Structural health monitoring7.6Composite recycling7.7Critical raw materials7.8Structural additive manufacturing7.9Trends in new platforms7.10Laboratory: SHM with strain gauges and optical fibre
8.1Component definition8.2Load and environmental requirements8.3Material preselection8.4Component design8.5Fatigue and damage analysis8.6Test plan8.7Manufacturing process8.8Conclusions8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Abaqus, Ansys Granta Selector, NASGRO, ANSYS Composite PrepPost and MATLAB, in free, academic or evaluation versions. Practical work is based on real procedures for tensile and fatigue testing of specimens, non-destructive inspection of composite panels and crack growth analysis. Assessment is continuous by module, plus the final project.
Standards covered: MMPDS, CMH-17, MIL-STD-1530D, ASTM D3039, ASTM E647, ASTM D7136, MIL-HDBK-6870.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Abaqus, Ansys Granta Selector, NASGRO, ANSYS Composite PrepPost and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in NATO Secure Communications
Online postgraduate diploma of 800 hours in NATO secure communications, structured in 8 modules covering allied communications architecture, HF, VHF and UHF links (STANAG 5066), information…
Diploma in Ethical Compliance Strategies in Defence
Online postgraduate diploma of 800 hours in ethical compliance strategies in defence, structured in 8 modules covering compliance in the defence industry (ISO 37301:2021), anti-corruption (ISO…
Diploma in Anti-Jamming and Anti-Spoofing Strategies
Online postgraduate diploma of 800 hours in anti-jamming and anti-spoofing strategies, structured in 8 modules covering GNSS systems and signals, interference threats, anti-jamming and anti-spoofing techniques,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships