Diploma in Military Microgrid Design (IEEE/NATO)
Online postgraduate diploma of 800 hours in military microgrid design, structured in 8 modules covering microgrid fundamentals, distributed generation, energy storage, power electronics and control, energy management, deployable microgrids and cybersecurity under IEEE 2030.7-2017, IEEE 1547-2018 and IEEE 2030.8-2018, with an assigned technical tutor.
Diploma in Military Microgrid Design (IEEE/NATO) — studying from India
India's defence sector is a major engineering employer, with public undertakings such as Bharat Electronics, Hindustan Aeronautics, Bharat Dynamics and Bharat Earth Movers, alongside private firms like Tata Advanced Systems and Larsen & Toubro. Research and development is coordinated by the Defence Research and Development Organisation, and procurement and capability planning sit within the Ministry of Defence. Engineers work on land systems, armoured vehicles, weapon platforms and military electronics, with a strong policy push towards indigenous design and manufacturing under the Make in India initiative.
Fees for India: ₹95,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are defence and military engineers recognised in India?
Defence engineering in India is largely recognised through government channels such as DRDO, the Ministry of Defence, and the armed forces' engineering branches, with recruitment governed by public service rules. The Institution of Engineers (India) is the general professional body. SEIUM's qualifications are private and not accredited by any national body, so recognition is decided by the employer or relevant authority.
Which employers in India hire defence and land systems engineers?
Employers include DRDO laboratories, Ordnance Factory Board units, defence public sector undertakings such as BEL and HAL, and private defence manufacturers. Military engineering roles are filled through official recruitment. A private online qualification can add technical depth, but government and defence employers mainly assess formal qualifications, security clearance and experience.
Is this programme workable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so no student visa is needed if you study from India. Time required is about 300 hours for specialist courses, 800 for diplomas and 1,900 for master's programmes. You get an assigned technical tutor, and fees can be paid in instalments. Ask your employer about sponsorship, since many defence firms fund further training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand microgrid architecture.
Size distributed generation.
Select and size energy storage systems.
Design inverter and microgrid control.
Implement energy management strategies.
Design deployable microgrids for field bases.
Protect the microgrid against cyber threats and extreme events.
Who it's for
- Microgrid engineers applying their expertise to military bases and installations.
- Power electrical engineers working on generation, protection and interconnection.
- Renewable energy specialists integrating solar, wind and storage into resilient systems.
- Control engineers designing inverter and microgrid control strategies.
- Facility energy managers responsible for critical sites.
- Energy resilience consultants advising defence and critical infrastructure clients.
- Engineering or science graduates looking to enter the defence sector.
What you'll work with
- IEEE 2030.7-2017 (specification of microgrid controllers)
- IEEE 1547-2018 (interconnection of distributed energy resources)
- IEEE 2030.8-2018 (testing of microgrid controllers)
- IEEE 519-2022 (harmonic control in power systems)
- IEC 62443-3-3 (security requirements for industrial automation systems)
- IEC 62351 (security of power system communications)
- NFPA 855 (installation of energy storage systems)
- HOMER Pro
- MATLAB/Simulink
- PSCAD
- ETAP
- OpenDSS
8 modules
1.1Definition according to IEEE 2030.71.2AC and DC architectures1.3Grid-connected and islanded modes1.4Microgrid components1.5Energy in military bases1.6Energy resilience1.7Operational energy in NATO1.8NATO Smart Energy initiative1.9Energy indicators1.10Practical exercise: load profile of a base
2.1Diesel generator sets2.2Photovoltaic generation2.3Wind generation2.4Fuel cells2.5Hydrogen2.6Fuel logistics2.7Generation sizing2.8Efficiency2.9Emissions2.10Lab: sizing with HOMER Pro
3.1Lithium-ion batteries3.2LFP batteries3.3Flow batteries3.4Supercapacitors3.5Battery management systems3.6Safety according to NFPA 8553.7Degradation3.8Sizing3.9Integration into the microgrid3.10Workshop: storage sizing
4.1Grid-forming and grid-following inverters4.2Droop control4.3Hierarchical control4.4Interconnection according to IEEE 15474.5Protection4.6Synchronisation4.7Power quality to IEEE 5194.8Stability4.9Simulation4.10Lab: droop control in Simulink
5.1Energy management systems5.2Economic dispatch5.3Demand and renewables forecasting5.4Optimisation5.5Demand-side management5.6Prioritisation of critical loads5.7Testing according to IEEE 2030.85.8Controller cybersecurity5.9Operator interfaces5.10Case study: dispatch strategy
6.1Field bases6.2Tactical generator sets6.3Transportability6.4Containerised solutions6.5Electrical interoperability6.6Reduction of logistic fuel6.7Field earthing6.8Maintenance6.9Operator training6.10Case study: microgrid for a 500-person camp
7.1IEC 62443 family7.2IEC 62351 standard7.3NERC CIP requirements7.4Threats to microgrids7.5Physical resilience7.6Climate events7.7Preventive maintenance7.8Resilience testing7.9Certification7.10Case study: cybersecurity risk analysis
8.1Base requirements8.2Demand profile8.3Generation selection8.4Storage8.5Electrical architecture8.6Control strategy8.7Cybersecurity8.8Economic analysis8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
The programme is 100% online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. You work with HOMER Pro, MATLAB/Simulink, PSCAD, ETAP and OpenDSS, in free, academic or evaluation versions. Testing is studied through real procedures for simulating islanded and grid-connected modes, techno-economic sizing and controller testing according to IEEE 2030.8. Assessment is continuous by module, plus the final project.
Standards covered: IEEE 2030.7-2017, IEEE 1547-2018, IEEE 2030.8-2018, IEEE 519-2022, IEC 62443-3-3, IEC 62351 and NFPA 855.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with HOMER Pro, MATLAB/Simulink, PSCAD, ETAP and OpenDSS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Military Airworthiness Processes
Online postgraduate diploma of 800 hours in military airworthiness processes. 8 modules covering EMAR M, EMAR 145, EMAR 66, maintenance programmes and quality and safety management,…
Diploma in International Humanitarian Law and Technology
Online postgraduate diploma of 800 hours in international humanitarian law and technology, structured in 8 modules covering IHL principles, Article 36 legal review, autonomy in defence…
Diploma in NATO Operational Continuity Plans
Online postgraduate diploma of 800 hours in NATO operational continuity plans: 8 modules covering NATO resilience, ISO 22301 continuity management systems, ISO 22317 business impact analysis,…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships