Diploma in Integration of Lightweight High-Power Engines
Online postgraduate diploma of 800 hours in the integration of lightweight high-power engines: 8 modules covering engine selection, mechanical integration, intake, exhaust and forced induction, cooling and lubrication, engine management, fuel and auxiliary systems, and validation and type approval of modifications, with an assigned technical tutor.
Diploma in Integration of Lightweight High-Power Engines — studying from India
India has a strong heritage of classic vehicles, motorcycles and machinery, with active enthusiast communities and specialist workshops in Mumbai, Delhi NCR, Bengaluru and Chennai. Interest in vintage cars and motorcycles, including classic Ambassador and Royal Enfield models, has grown steadily. Restoration work combines historical research, metalwork, mechanical rebuilding and conservation techniques. While formal regulation is limited, vehicle registration and roadworthiness fall under state transport authorities, and the Automotive Research Association of India provides technical expertise. Engineers and craftspeople in this area focus on restoration, documentation and technical authenticity.
Fees for India: ₹95,000 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Is there a recognised body in India for classic vehicle restoration?
There is no statutory title for classic restoration in India. Vehicle standards and registration involve bodies such as the Automotive Research Association of India, and enthusiast clubs operate informally. SEIUM's qualification is a private one and is not accredited by any national body, so its value depends on how employers and clients see it.
Which employers or clients in India use classic restoration skills?
Specialist restoration workshops, collectors, classic car dealers, and heritage motoring firms are typical employers and clients. Work is often based on reputation and a portfolio of completed restorations. A private qualification may support your background, but clients and employers will judge your actual craftsmanship.
Can I study this part-time from India, and is it in English?
The programme is 100% online and taught in English, so you need a working level of English. You can study from home anywhere in India without a student visa, and an assigned technical tutor supports you. Fees are payable in instalments, and employer sponsorship is possible if your workplace will fund it.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Select lightweight high-power engines for each application.
Design the mechanical integration of the engine into the vehicle.
Develop intake, exhaust and forced-induction systems.
Size cooling and lubrication systems.
Configure and calibrate engine management.
Integrate auxiliary systems safely.
Validate and legalise the engine integration.
Who it's for
- Engine integration engineers.
- Vehicle tuners and preparers.
- ECU calibrators.
- Vehicle modification technicians.
- Motorsport engineers.
- Dynamometer technicians.
- Engineering or science graduates seeking to enter vehicle preparation.
What you'll work with
- Royal Decree 866/2010 (Spanish procedure for vehicle modifications)
- Vehicle Modifications Manual (Spanish technical guide for approving modifications)
- Regulation (EU) 2018/858 (approval and market surveillance of motor vehicles)
- UNECE Regulation No. 85 (measurement of engine net power)
- UNECE Regulation No. 51 (noise emissions of motor vehicles)
- UNECE Regulation No. 10 (electromagnetic compatibility)
- FIA Appendix J (technical regulations for competition cars)
- SolidWorks
- MoTeC M1 Tune
- GT-SUITE
- MATLAB
8 modules
1.1Specific output and power-to-weight ratio1.2Compact turbocharged engines1.3High-revving naturally aspirated engines1.4Motorcycle engines in cars1.5High-density electric motors1.6Lightweight materials in the engine1.7Torque and power curves1.8Reliability and service life1.9Engine selection1.10Practical: comparing engines for a lightweight sports car
2.1Engine mounts2.2Bushings and stiffness2.3Centre of gravity2.4Alignment with the driveline2.5Bellhousings and adaptors2.6Clutches2.7Flywheels2.8Propeller shafts2.9Packaging and accessibility2.10Workshop: designing engine mounts
3.1Intake manifolds3.2Air filters3.3Turbochargers3.4Intercoolers3.5Wastegates and blow-off valves3.6Exhaust manifolds3.7Silencers3.8Thermal insulation3.9Noise within approval limits3.10Laboratory: pressure drop in an intake system
4.1Radiators4.2Oil coolers4.3Dry sump4.4Electric pumps4.5Air ducting4.6Engine bay thermal management4.7Component protection4.8Gearbox cooling4.9Thermal testing4.10Practical: sizing a cooling circuit
5.1Programmable control units5.2Sensors and actuators5.3Engine wiring loom5.4CAN network5.5Fuel injection and ignition calibration5.6Boost control5.7Traction control5.8Data logging5.9Electronic safety5.10Laboratory: basic calibration on a chassis dynamometer
6.1Fuel tanks6.2Pumps and regulators6.3Fuel lines6.4Starting systems6.5Alternators6.6Lightweight batteries6.7Instrument cluster6.8Clutch and gearshift6.9Fire safety6.10Case study: fuel system for track use
7.1Chassis dynamometer testing7.2Track testing7.3Emissions measurement7.4Noise measurement7.5Electromagnetic compatibility7.6Major vehicle modifications7.7Technical documentation7.8Roadworthiness inspection7.9Responsibility of the vehicle modifier7.10Practical: modification file for an engine swap
8.1Selecting the vehicle and engine8.2Feasibility study8.3Designing mounts and driveline8.4Intake and exhaust systems8.5Cooling8.6Electronics8.7Validation and type approval8.8Technical dossier8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
A 100% online programme on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so you can combine it with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is SolidWorks, MoTeC M1 Tune, GT-SUITE and MATLAB, in free, academic or evaluation versions. Testing is studied through real procedures: calibration on a chassis dynamometer, engine bay thermal testing and noise measurement for the modification approval. Assessment is continuous by module, plus the final project.
Standards covered: Royal Decree 866/2010, Spanish Vehicle Modifications Manual, Regulation (EU) 2018/858, UNECE Regulation No. 85, UNECE Regulation No. 51, UNECE Regulation No. 10, FIA Appendix J.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with SolidWorks, MoTeC M1 Tune, GT-SUITE and MATLAB, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Taxation, VAT and Intra-Community Transactions
Online postgraduate diploma of 800 hours in taxation, VAT and intra-Community transactions in the vehicle trade, with 8 modules covering VAT structure, intra-Community supplies, new and…
Diploma in Environmental and Documentary Compliance
Online postgraduate diploma of 800 hours in environmental and documentary compliance for restoration workshops. 8 modules covering the environmental framework, hazardous waste, VOCs and paints, REACH…
Diploma in Off-Road Semi-Active Suspension Systems
Online postgraduate diploma of 800 hours in off-road semi-active suspension systems, structured in 8 modules covering off-road vehicle dynamics, variable damping dampers, sensors and data acquisition,…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships