Course in Hydrodynamics of Hydrofoils (Foils)
Online 300 h course in hydrodynamics of hydrofoils (foils). 6 modules with HSC Code 2000, the International Code of Safety for High-Speed Craft, DNV-RU-HSLC Rules for High Speed and Light Craft and XFOIL. Assigned tutor and open enrolment.
Course in Hydrodynamics of Hydrofoils (Foils) — studying from India
India has a long coastline and growing maritime ambitions, supported by shipbuilding and port development at Kochi, Mumbai, Visakhapatnam and Kolkata. Cochin Shipyard, Mazagon Dock Shipbuilders, Garden Reach Shipbuilders and Larsen & Toubro's offshore arm are important employers. The Directorate General of Shipping sets regulations for vessel safety and seafarers, while the Indian Register of Shipping provides classification services. Offshore oil and gas activity led by Oil and Natural Gas Corporation adds further demand. Engineers work on naval architecture, marine systems, offshore structures and recreational boat design.
Fees for India: ₹68,400 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which bodies regulate naval and offshore engineering in India?
The Directorate General of Shipping regulates shipping, and the Indian Register of Shipping is the classification society. Naval work is tied to the Indian Navy and shipyards. SEIUM's qualification is a private one and is not accredited by any national body, so recognition by these organisations is not automatic and must be checked with them.
Which employers in India use naval, offshore and nautical engineering skills?
Shipyards such as Mazagon Dock and Cochin Shipyard, offshore oil and gas service firms, marine consultancies, and sports boat builders are typical employers. Each decides its own hiring criteria. The programme can support your profile, but it does not secure a role or any particular recognition.
Can I study this online from India with a job, and what are the costs?
The programme is 100% online and taught in English, so you can study from anywhere in India and do not need a student visa. Workload depends on the programme length, with support from an assigned technical tutor and a final project. Fees are payable in instalments, and employer sponsorship is possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the hydrodynamic lift of foils.
Analyse cavitation and ventilation on profiles and struts.
Model flight dynamics and their control.
Structurally design foils in composite materials.
Evaluate commercial and sport applications of hydrofoils.
Apply the regulations for high-speed craft.
Develop the preliminary design of a foiling craft.
Who it's for
- Hydrofoil engineer wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- Fast craft designer wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- Flight control engineer wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- Composites engineer wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- CFD engineer wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- Marine R&D manager wishing to specialise in Hydrodynamics of Hydrofoils (Foils).
- Graduates in engineering or sciences seeking to enter electric ferries.
What you'll work with
- HSC Code 2000 International Code of Safety for High-Speed Craft
- DNV-RU-HSLC Rules for High Speed and Light Craft
- ISO 12215-9 Sailing boat appendages
- Directive 2013/53/EU on recreational craft
- ITTC 7.5-02-05-01 High Speed Marine Vehicles: Resistance Test
- World Sailing Equipment Rules of Sailing
- IMO Resolution MSC.97(73) adoption of the HSC Code 2000
6 modules · 300 h
1.1Hydrodynamic profiles and lift coefficients1.2Lift-to-drag ratio and efficiency1.3Surface-piercing versus fully submerged foils1.4Effect of free-surface proximity1.5Take-off and transition to flight1.6Canard and conventional configurations1.7History: from Forlanini to foiling ferries1.8Foil scaling and Reynolds number1.9Loads on struts and foils1.10Case study: sizing a lifting foil
2.1Cavitation on profiles at high speed2.2Design of supercavitating profiles2.3Ventilation from the free surface2.4Struts and flow separation2.5Sudden loss of lift2.6Anti-ventilation fence designs2.7Operational speed limits2.8Tank and channel testing of foils2.9Erosion and foil damage2.10Practice: estimating cavitation inception speed
3.1Longitudinal stability in flight3.2Height control: sensors and flaps3.3Mechanical systems with surface-tracking probes3.4Electronic control and actuators3.5Response in waves and wave orbital motion3.6Lateral stability and coordinated turns3.7Six degrees of freedom models3.8PID controller tuning3.9Safety against control failures3.10Laboratory: height control simulation
4.1Design loads and safety factors4.2Carbon fibre and prepreg laminates4.3Moulding and autoclave manufacturing4.4Titanium and steel metal foils4.5Joints between foil, strut and hull4.6Laminate fatigue4.7Deformation and aeroelastic effects4.8Inspection and quality control4.9Repair of impact damage4.10Workshop: laminating a scale foil
5.1Foiling electric ferries5.2Sport craft: Moth, kitefoil and WASZP5.3AC75 and IMOCA racing yachts5.4Work and patrol boats5.5Energy savings compared with planing hulls5.6Comfort and reduced motion5.7Regulations applicable to foiling ferries5.8Safety aspects and collision with objects5.9Market and technology trends5.10Case study: evaluating a foiling electric ferry
6.1Mission and speed requirements6.2Foil configuration and layout6.3Hydrodynamic profile design6.4Cavitation and ventilation analysis6.5Flight control system6.6Structural calculation of foils and struts6.7Power and range estimation6.8Operational safety analysis6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and a assigned technical tutor. There are no fixed timetables: students progress at their own pace within the enrolment period, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is XFOIL, Simcenter STAR-CCM+, MATLAB/Simulink, ANSYS Composite PrepPost, in free, academic or evaluation versions. Tests are studied using real procedures for flight height control simulation, strut ventilation testing and structural calculation of carbon foils. Assessment is continuous, module by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Understand the hydrodynamic lift of foils.
Analyse cavitation and ventilation on profiles and struts.
Model flight dynamics and their control.
Structurally design foils in composite materials.
Evaluate commercial and sport applications of hydrofoils.
Where this takes you
Requirements
- No prior qualification required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with XFOIL, Simcenter STAR-CCM+, MATLAB/Simulink, ANSYS Composite PrepPost. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM diploma awarded on passing the continuous assessment and the final integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
Dynamic Umbilicals and Fatigue Course
Online 300-hour course in dynamic umbilicals and fatigue. 6 modules covering API Spec 17E / ISO 13628-5 Subsea umbilicals, DNV-RP-C203 Fatigue design of offshore steel structures…
Auxiliary Vessel Electrification Course
Online 300-hour course in auxiliary vessel electrification. 6 modules covering DNV-RU-SHIP Pt.6 Ch.2 Sec.1 Battery class notation, IEC 62619 Safety requirements for lithium batteries for industrial…
STCW Maritime Safety Training Course
Online 300-hour STCW maritime safety training course. 6 modules covering the amended STCW 1978 Convention, the STCW Code and Kongsberg K-Sim. Personal tutor and open enrolment.
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships