Course in Cybersecurity Regulations for UAS
300-hour online course in cybersecurity regulations for UAS. 6 modules covering Implementing Regulation (EU) 2019/947 (UAS operations), EUROCAE ED-202A (airworthiness and information security) and Microsoft Threat Modeling Tool. Assigned tutor and open enrolment.
Course in Cybersecurity Regulations for UAS — studying from India
India's defence sector is a major engineering employer, with public undertakings such as Bharat Electronics, Hindustan Aeronautics, Bharat Dynamics and Bharat Earth Movers, alongside private firms like Tata Advanced Systems and Larsen & Toubro. Research and development is coordinated by the Defence Research and Development Organisation, and procurement and capability planning sit within the Ministry of Defence. Engineers work on land systems, armoured vehicles, weapon platforms and military electronics, with a strong policy push towards indigenous design and manufacturing under the Make in India initiative.
Fees for India: ₹78,800 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
How are defence and military engineers recognised in India?
Defence engineering in India is largely recognised through government channels such as DRDO, the Ministry of Defence, and the armed forces' engineering branches, with recruitment governed by public service rules. The Institution of Engineers (India) is the general professional body. SEIUM's qualifications are private and not accredited by any national body, so recognition is decided by the employer or relevant authority.
Which employers in India hire defence and land systems engineers?
Employers include DRDO laboratories, Ordnance Factory Board units, defence public sector undertakings such as BEL and HAL, and private defence manufacturers. Military engineering roles are filled through official recruitment. A private online qualification can add technical depth, but government and defence employers mainly assess formal qualifications, security clearance and experience.
Is this programme workable with a job in India, and does it need a visa?
The programme is 100% online and taught in English, so no student visa is needed if you study from India. Time required is about 300 hours for specialist courses, 800 for diplomas and 1,900 for master's programmes. You get an assigned technical tutor, and fees can be paid in instalments. Ask your employer about sponsorship, since many defence firms fund further training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Identify the attack surface of an unmanned aircraft system.
Analyse threats and risks using standardised methodologies.
Select technical measures to protect the link, the aircraft and the station.
Define secure operating procedures.
Interpret the regulatory cybersecurity requirements applicable to UAS.
Manage security across the system lifecycle.
Develop a cybersecurity plan for a UAS.
Who it's for
- UAS cybersecurity engineer looking to specialise in UAS cybersecurity regulations.
- Information security risk analyst looking to specialise in UAS cybersecurity regulations.
- Drone operations manager looking to specialise in UAS cybersecurity regulations.
- Aeronautical cybersecurity auditor looking to specialise in UAS cybersecurity regulations.
- Secure embedded systems engineer looking to specialise in UAS cybersecurity regulations.
- UAS regulatory compliance consultant looking to specialise in UAS cybersecurity regulations.
- Engineering or science graduates seeking to enter the drone industry.
What you'll work with
- Implementing Regulation (EU) 2019/947 (UAS operations)
- EUROCAE ED-202A (airworthiness and information security)
- IEC 62443 (cybersecurity of control systems)
- Delegated Regulation (EU) 2019/945 (UAS systems)
- Directive (EU) 2022/2555 (NIS2)
- ISO/IEC 27005 (security risk management)
- RTCA DO-326A (airworthiness and security process)
6 modules · 300 h
1.1Components: aircraft, control station, link and services1.2External interfaces and entry points1.3Command and control link as a critical asset1.4Payload and its interfaces1.5Cloud services and mobile applications1.6Supply chain for components and software1.7Consequences of an attack: loss, diversion and data leakage1.8Applicable regulatory and certification framework1.9Domain vocabulary and acronyms1.10Exercise: mapping the attack surface
2.1Threat modelling methodology2.2Link interference and loss of control2.3Spoofing of the navigation signal2.4Unauthorised access to the control station2.5Manipulation of the flight plan2.6Data extraction from storage2.7Firmware manipulation and boot2.8Impact and feasibility assessment2.9Risk prioritisation and treatment2.10Practice: risk analysis of a system
3.1Link authentication and encryption3.2Secure boot and chain of trust3.3Encrypted storage and secure erasure3.4Key and device identity management3.5Signed and verified updates3.6Navigation anomaly detection3.7Sensor redundancy and alternative navigation3.8Safe behaviour on link loss3.9Event logging and its protection3.10Practice: defining the measures for a system
4.1Procedures before, during and after flight4.2Operator credential management4.3Control of physical equipment and custody4.4Control station networks and their isolation4.5Use of personal devices and removable media4.6Management of captured data and chain of custody4.7In-flight interference detection and response4.8Incident reporting4.9Operator training and awareness4.10Practice: secure operating procedure
5.1Cybersecurity requirements in operational authorisation5.2Applicable product cybersecurity standards5.3Authorised assessment and penetration testing5.4Coordinated vulnerability disclosure5.5Fleet patch management5.6Obsolescence and end-of-support management5.7Supplier requirements and auditing5.8System security documentation5.9Equipment decommissioning and data erasure5.10Practice: cybersecurity file for an operation
6.1Selection of the system and operation6.2Threat modelling and risk analysis6.3Design of technical measures6.4Operational security procedures6.5Test and verification plan6.6Vulnerability and patch management plan6.7Supplier requirements6.8Staff training plan6.9Technical report6.10Project defence
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. There are no fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the course with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Microsoft Threat Modeling Tool, Wireshark, QGroundControl, Nessus, in free, academic or evaluation versions. Practical work is based on real UAS threat-modelling procedures, analysis of command and control link traffic and secure configuration audits. Assessment is continuous, module by module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Identify the attack surface of an unmanned aircraft system.
Analyse threats and risks using standardised methodologies.
Select technical protection measures for the link, the aircraft and the station.
Define secure operating procedures.
Interpret the regulatory cybersecurity requirements applicable to UAS.
Where this takes you
Requirements
- No prior qualification required.
- Internet connection and a computer capable of running the programme's software.
- Spanish-language proficiency sufficient to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours, spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with full-time work.
The course uses Microsoft Threat Modeling Tool, Wireshark, QGroundControl, Nessus. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
SEIUM's own diploma upon passing continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or Postgraduate Diploma in the same area are recognised towards the higher-level programme. Check the recognition policy when you enrol.
Related programmes
Standards in Military Predictive Maintenance Course
Online 300 h course in standards in military predictive maintenance. 6 modules covering ISO 17359 (condition monitoring), ISO 13374 (processing of monitoring data) and MATLAB (Predictive…
NIS2 Regulation Course for Critical Infrastructure
Online 300-hour course in NIS2 regulation for critical infrastructure. 6 modules covering Directive (EU) 2022/2555 (NIS2), Implementing Regulation (EU) 2024/2690 (NIS2 technical measures) and PILAR (CCN…
Course in Ethics in Geolocation Systems
Online 300 h course in ethics of geolocation systems. 6 modules covering Regulation (EU) 2016/679 (GDPR), Directive 2002/58/EC (privacy and electronic communications) and QGIS. Dedicated tutor…
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships