Cabin pressurization systems course
Online course of 300 hours in cabin pressurisation systems: 6 modules covering cabin physiology and requirements, system components, pressure control and scheduling, depressurisation and emergencies, and maintenance and testing, with an assigned technical tutor.
Cabin pressurization systems course — studying from India
India's aerospace sector is growing steadily, anchored by Bengaluru, Hyderabad and the Kanpur-Lucknow belt. Hindustan Aeronautics Limited, Tata Advanced Systems and Bharat Electronics are major employers, alongside a fast-growing base of drone and space start-ups. The Indian Space Research Organisation and the Defence Research and Development Organisation drive research programmes, while civil aviation rules are set by the Directorate General of Civil Aviation. Engineers here work on aircraft systems, unmanned aerial vehicles, satellite subsystems and urban air mobility concepts, and the sector's push for indigenisation keeps demand for skilled talent strong.
Fees for India: ₹78,800 (Indian Rupee), with instalments and employer sponsorship available.
Relevant bodies in India
Typical roles
Questions from India
Which professional bodies in India recognise aerospace engineering, and does a private online qualification help with recognition?
In India, aeronautical engineering is recognised mainly through the Institution of Engineers (India), the Aeronautical Society of India and the Directorate General of Civil Aviation for aircraft maintenance licences. SEIUM's qualifications are private, not state degrees, and are not accredited by any national body. Whether they count towards professional membership or roles is decided by the employer or the relevant body, so check their criteria before enrolling.
Which employers in India hire aerospace engineers, and how would this programme be used in that work?
Aerospace engineers in India work with organisations such as ISRO, HAL, DRDO laboratories, and private aerospace and drone firms, along with MRO and airline engineering teams. A private postgraduate qualification can support a career move or specialisation, but it is not a substitute for formal technical experience or statutory certifications. Employers usually weigh it alongside your work record and skills.
Can I manage this programme alongside a full-time job in India, given the time zone and language?
The programme is 100% online and taught in English, so you can study from home without a student visa. Classes and deadlines are set by the school, so check the schedule against India Standard Time (IST). Master's programmes are around 1,900 hours, postgraduate diplomas around 800 and specialist courses around 300, so plan your weekly hours realistically. You get an assigned technical tutor. Ask your employer about sponsorship, as instalment fees may make this easier.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the physiological fundamentals of pressurisation.
Describe the components of the pressurisation system.
Analyse cabin pressure control logic.
Model the pressure dynamics of the cabin volume.
Assess depressurisation and emergency scenarios.
Plan tests and maintenance tasks.
Interpret the applicable certification requirements.
Who it's for
- Aircraft air systems engineers looking to master pressurisation in depth.
- Pneumatic systems maintenance technicians wanting a stronger engineering foundation.
- System safety engineers assessing failures and depressurisation scenarios.
- Certification engineers working on pressurisation compliance.
- Control engineers designing or tuning cabin pressure controllers.
- Fleet support engineers troubleshooting in-service pressurisation issues.
- Engineering or science graduates seeking to enter the aeronautical sector.
What you'll work with
- CS 25.841 (EASA) (pressurised cabins)
- 14 CFR 25.841 (FAA pressurised cabin requirements)
- CS 25.365 (EASA) (pressurised compartment loads)
- CS 25.1309 (EASA) (equipment, systems and installations safety)
- SAE ARP1270B (aircraft cabin pressurisation criteria)
- RTCA DO-160G (environmental conditions and test procedures for airborne equipment)
- CS 25.1443 (EASA) (minimum mass flow of supplemental oxygen)
- MATLAB/Simulink
- Simcenter Amesim
- Dymola
- AMOS (Swiss AviationSoftware)
6 modules
1.1Hypoxia and altitude effects1.2Oxygen partial pressure1.3Maximum permissible cabin altitude1.4Rate of pressure change and comfort1.5Barotrauma and effects on occupants1.6Pressurisation certification requirements1.7Maximum fuselage differential pressure1.8Negative differential and relief valves1.9Cabin altitude in modern aircraft1.10Case study: cabin altitude on a typical flight
2.1Air sources: bleed air and electric compressors2.2Outflow valves2.3Safety and negative relief valves2.4Cabin pressure controllers2.5Pressure and altitude sensors2.6Fuselage airtightness2.7Plug doors and seals2.8Pressure bulkheads2.9Flight deck indications and alerts2.10Practical exercise: functional diagram of a pressurisation system
3.1Automatic, manual and standby modes3.2Scheduling in climb, cruise and descent3.3Outflow valve control logic3.4Landing at high-altitude airports3.5Control loop stability3.6Dynamic modelling of the cabin volume3.7Controller failures and redundancy3.8Integration with the air conditioning system3.9Control system simulation3.10Lab: simulation of cabin pressure during a climb
4.1Slow, rapid and explosive depressurisation4.2Time of useful consciousness4.3Crew and passenger oxygen systems4.4Emergency descent4.5Structural loads from decompression4.6Venting between compartments4.7System safety analysis4.8Pressurisation accident investigations4.9Crew training4.10Case study: analysis of a depressurisation in cruise
5.1Fuselage leak tests5.2Functional valve tests5.3Inspection of seals and gaskets5.4Leak location5.5Pressure tests in certification5.6Controller maintenance5.7Components on the minimum equipment list5.8Reliability and failure rates5.9Structural fatigue from pressure cycles5.10Workshop: cabin leak test procedure
6.1Aircraft requirements6.2Mission profile and altitudes6.3System architecture6.4Valve sizing6.5Proposed control logic6.6Failure and emergency analysis6.7Test plan6.8Design conclusions6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, Simcenter Amesim, Dymola and AMOS (Swiss AviationSoftware), in free, academic or evaluation versions. Testing is studied through real procedures: simulation of in-flight pressure control, analysis of a depressurisation scenario and a cabin leak test procedure. Assessment is continuous by module plus the final integrative project.
Standards covered: CS 25.841 (EASA), 14 CFR 25.841, CS 25.365 (EASA), CS 25.1309 (EASA), SAE ARP1270B, RTCA DO-160G, CS 25.1443 (EASA).
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer able to run the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB/Simulink, Simcenter Amesim, Dymola and AMOS (Swiss AviationSoftware), using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need an internet connection, a computer able to run the programme's software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Urban air traffic simulation course
Online course of 300 hours in urban air traffic simulation: 6 modules covering urban air traffic modelling, simulation tools, traffic management algorithms, scenarios and experimentation, and…
LQR course in orbital control
Online course of 300 hours in LQR for orbital control: 6 modules covering linear optimal control, linearised relative orbital dynamics, LQR for station-keeping, formations and rendezvous,…
Advanced dimensional control course
Online course of 300 hours in advanced dimensional control: 6 modules covering geometric tolerancing and specification, tolerance stack-up analysis, advanced verification techniques, statistical control and capability…
More in Aerospace, UAM, Drones & Space
All Aerospace, UAM, Drones & Space programmes → · How to apply · Fees & financing · Scholarships