Postgraduate Diploma in WWTP Design and Biological Processes
Online 800-hour Postgraduate Diploma in WWTP Design and Biological Processes. 8 modules covering Directive 91/271/EEC (urban waste water treatment), Directive (EU) 2024/3019 (recast on urban waste water) and BioWin. Assigned tutor and open enrolment.
Postgraduate Diploma in WWTP Design and Biological Processes — studying from Ireland
Ireland's civil engineering sector is driven by public infrastructure investment in roads, water, housing and public transport, alongside rail projects such as Dublin's light rail and commuter rail upgrades. Transport Infrastructure Ireland sets standards for national roads, while Irish Rail and Iarnród Éireann operate and develop the rail network. Smart city initiatives in Dublin and other urban areas create demand for engineers working on sensors, data platforms and integrated mobility systems. Typical employers include contractors, consultancies, local authorities and public agencies, with Engineers Ireland providing professional recognition.
Fees for Ireland: €1,090 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Is a SEIUM qualification recognised for chartered civil or rail engineering status in Ireland?
Chartered engineer status in Ireland is administered by Engineers Ireland, which sets its own criteria for membership and registration. Rail is regulated in part by the National Transport Authority and Irish Rail-related bodies, while building and infrastructure standards involve other authorities. SEIUM's qualifications are private and not accredited by any national body, so recognition is for those bodies and employers to decide.
Do Irish civil, rail and smart-city employers consider private online engineering study?
Irish infrastructure, consultancy and local authority employers usually weigh chartered status, project experience and relevant degrees heavily. A private online qualification may be considered as supporting evidence of skills, but its value is at each employer's discretion. We cannot promise any outcome, so discuss it with prospective employers.
Can I study alongside a site or office job, and is employer funding common?
The programme is online and taught in English, so you can study from home without travel or a student visa. Plan for 1,900 hours on a master's, 800 on a postgraduate diploma or 300 on a specialist course. Each student has an assigned technical tutor, fees can be paid in instalments, and employer sponsorship may be possible. Many Irish employers have continuing professional development budgets, so ask yours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Characterise wastewater and establish design flows and loads.
Size pretreatment and primary treatment.
Apply microbiology and kinetics to the design of biological reactors.
Size activated sludge processes with nutrient removal.
Evaluate intensified processes such as MBR, MBBR or granular sludge.
Model processes with ASM models to optimise operation.
Develop the design of a WWTP with energy and control criteria.
Who it's for
- Wastewater treatment process engineer who wants to specialise in WWTP Design and Biological Processes.
- WWTP designer who wants to specialise in WWTP Design and Biological Processes.
- Treatment plant manager who wants to specialise in WWTP Design and Biological Processes.
- Biological process modeller who wants to specialise in WWTP Design and Biological Processes.
- WWTP energy optimisation consultant who wants to specialise in WWTP Design and Biological Processes.
- Sanitation operations technician who wants to specialise in WWTP Design and Biological Processes.
- Graduates in engineering or sciences seeking to enter water and sanitation companies.
What you'll work with
- Directive 91/271/EEC (urban waste water treatment)
- Directive (EU) 2024/3019 (recast on urban waste water)
- EN 12255 series (wastewater treatment plants)
- Royal Decree 509/1996 (implementing Royal Legislative Decree 11/1995 on waste water)
- DWA-A 131 (sizing of activated sludge plants)
- Royal Decree 849/1986 (Regulations on the Public Water Domain)
8 modules · 800 h
- , COD, TSS, nitrogen and phosphorus parameters
1.2COD fractionation1.3Design flows and loads1.4Population equivalents1.5Directive (EU) 2024/3019 on urban waste water1.6Discharge requirements under Royal Decree 509/19961.7Industrial discharges and ordinances1.8Combined sewer overflows1.9Sampling campaigns1.10Practical: design loads for a population
2.1Screening and sieving2.2Grit and grease removal2.3Inlet pumping2.4Primary sedimentation2.5Physicochemical treatment2.6Flow equalisation2.7Pretreatment waste management2.8Plant hydraulic profile2.9Storm tanks2.10Workshop: sizing an aerated grit chamber
3.1Microorganisms in activated sludge3.2Monod kinetics3.3Cell yield and endogenous decay3.4Sludge age3.5Nitrification: bacteria and conditions3.6Denitrification3.7Biological phosphorus removal3.8Filamentous bacteria and bulking3.9Activated sludge microscopy3.10Laboratory: microscopic observation and SVI
4.1Completely mixed and plug-flow reactors4.2Extended aeration4.3Oxygen demand4.4Fine-bubble diffused aeration4.5Secondary sedimentation and solids flux4.6Internal and external recirculation4.7MLE, A2O and Bardenpho configurations4.8Sequencing batch reactors (SBR)4.9Sizing according to DWA-A 131 guidance4.10Practical: sizing an activated sludge system with nitrification
5.1Membrane bioreactors5.2Aerobic granular sludge5.3Moving bed biofilm reactors (MBBR)5.4Hybrid IFAS systems5.5Anammox and deammonification5.6Submerged biofilters5.7Ozone and carbon for micropollutants5.8Constructed wetlands and trickling filters in small communities5.9Technology selection criteria5.10Case study: capacity expansion with IFAS
6.1ASM1, ASM2d and ASM3 Models 6.2 Fractionation for Modeling 6.3 Calibration Protocols 6.4 Takács Clarifier Model 6.5 Simulation with Commercial Software 6.6 Dynamic Simulation and BSM1 6.7 Energy Optimization Through Simulation 6.8 WWTP Digital Twin 6.9 Uncertainty in Modelling 6.10 Practice: Calibrating an ASM1 Model
7.1Energy consumption of a WWTP7.2Dissolved oxygen control7.3Ammonium-based aeration control7.4Online instrumentation7.5Operational indicators7.6Foaming and filamentous bulking7.7N₂O emissions and carbon footprint7.8Maintenance of electromechanical equipment7.9Health and safety in WWTPs7.10Workshop: aeration control strategy
8.1Design bases and discharge requirements8.2Selection of the water line8.3Sizing of pretreatment and primary treatment8.4Sizing of the biological reactor8.5Secondary sedimentation and tertiary treatment8.6Hydraulic profile and site layout8.7Energy balance and control8.8Budget and operating costs8.9Report and presentation8.10Final review with the tutor
How you'll learn
Training 100% online on the SEIUM campus, with downloadable material, recorded classes and assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine study with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is BioWin, GPS-X, SUMO, AutoCAD, advanced Excel, in free, academic or evaluation versions. Tests are studied using real procedures for respirometry tests, analytical characterisation of wastewater and dynamic WWTP simulation. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Characterise wastewater and establish design flows and loads.
Size pretreatment and primary treatment.
Apply microbiology and kinetics to the design of biological reactors.
Size activated sludge processes with nutrient removal.
Evaluate intensified processes such as MBR, MBBR or granular sludge.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours, spread over 6 to 8 months. That is between 10 and 15 hours a week on average, compatible with full-time work.
You work with BioWin, GPS-X, SUMO, AutoCAD and advanced Excel. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or diploma in the same area are credited towards the advanced programme. Check the credit-transfer policy when you enrol.
Related programmes
Diploma in Wind Tunnel Testing and CFD for Structures
Online postgraduate diploma of 800 hours in wind tunnel testing and CFD for structures. 8 modules covering similarity and physical modelling, boundary layer wind tunnels, structural…
Diploma in Asset Management and Bridge Maintenance
Online postgraduate diploma of 800 hours in bridge asset management and maintenance, structured in 8 modules covering infrastructure asset management under ISO 55000, bridge inspection, defects…
Diploma in Ventilation, Safety and Emergencies in Tunnels
Online postgraduate diploma of 800 hours in tunnel ventilation, safety and emergencies, structured in 8 modules covering tunnel safety regulation under Directive 2004/54/EC, normal ventilation, tunnel…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships