Postgraduate Diploma in VOC, Waste and Compliance Management
Online 800 h Postgraduate Diploma in VOC, Waste and Compliance Management. 8 modules with Directive 2004/42/EC (VOC content in vehicle refinishing products), Royal Decree 117/2003 (limitation of VOC emissions from solvent use) and advanced Excel. Assigned tutor and open enrolment.
Postgraduate Diploma in VOC, Waste and Compliance Management — studying from Ireland
Ireland has an active heritage vehicle and classic machinery community, supported by clubs, restoration workshops and specialist suppliers serving classic cars, motorcycles and agricultural equipment. Engineering skills in this area combine historical knowledge with modern techniques in fabrication, materials and diagnostics. Restoration work is often linked to heritage conservation and museum collections, and classic vehicles operate under national roadworthiness and vehicle registration rules. Professional bodies and enthusiast organisations help maintain standards and knowledge across the sector.
Fees for Ireland: €895 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Is there a recognised professional body in Ireland for classic vehicle restoration?
Classic vehicle restoration in Ireland is largely a craft and hobby sector, supported by enthusiast clubs and heritage bodies rather than a regulated professional title. SEIUM's qualifications are private and not accredited by any national body, so they do not confer membership or formal recognition. Check the requirements of any club or body you wish to join.
Would Irish restoration businesses or employers value this qualification?
Restoration businesses in Ireland often rely on hands-on skill, reputation and portfolio work. A private online qualification may add to your CV, but employers decide for themselves whether it is relevant. Your final project can help show your capability, though there is no guarantee of any outcome.
Can I study this part-time while keeping my current commitments?
Yes, the programme is 100% online and taught in English, so you can study from home around existing commitments. Durations are 300, 800 or 1,900 hours depending on the course, so plan your schedule accordingly. Fees can be paid in instalments, and each student has an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the origin and impact of volatile organic compounds.
Develop solvent management and emission reduction plans.
Classify, store and trace hazardous workshop waste.
Manage environmental permits, records and declarations.
Prevent water and soil contamination from the activity.
Apply chemical safety measures and product labelling.
Implement an environmental management system focused on compliance.
Who it's for
- Industrial environmental technician looking to specialise in VOC, Waste and Compliance Management.
- Environmental compliance manager looking to specialise in VOC, Waste and Compliance Management.
- Environmental management systems auditor looking to specialise in VOC, Waste and Compliance Management.
- Chemical risk prevention technician looking to specialise in VOC, Waste and Compliance Management.
- Hazardous waste manager looking to specialise in VOC, Waste and Compliance Management.
- Environmental consultant for workshops looking to specialise in VOC, Waste and Compliance Management.
- Engineering or science graduates seeking to enter body and paint shops.
What you'll work with
- Directive 2004/42/EC (VOC content in vehicle refinishing products)
- Royal Decree 117/2003 (limitation of VOC emissions from solvent use)
- Law 7/2022 (waste and contaminated soils)
- Regulation (EC) 1272/2008 CLP
- Directive 2010/75/EU (industrial emissions)
- ISO 14001 (environmental management systems)
- Royal Decree 374/2001 (chemical agents at work)
8 modules · 800 h
1.1Definition of VOCs and their chemistry1.2Sources of VOCs in paint shops1.3Health effects and tropospheric ozone1.4Paints Directive 2004/42/EC1.5Royal Decree 227/20061.6Industrial emissions Directive 2010/75/EU1.7Royal Decree 117/2003 on solvents1.8Solvent consumption thresholds1.9Solvent management plan1.10Case study: solvent balance of a workshop
2.1Water-based versus solvent-based paints2.2High-solids paints2.3HVLP guns and transfer efficiency2.4Spray booths and filtration2.5Activated carbon and thermal oxidation2.6Closed-loop gun cleaning2.7Good application practices2.8Consumption control2.9Investment and return2.10Practice: calculating emissions by paint type
3.1Law 7/2022 on waste3.2European List of Waste and LER codes3.3Waste from paints, solvents and filters3.4Used oils and Royal Decree 679/20063.5Batteries and Royal Decree 106/20083.6Contaminated packaging3.7Temporary storage3.8Labelling and pictograms3.9Authorised waste managers3.10Workshop exercise: LER classification of workshop waste
4.1Registration as a waste producer4.2Identification and transfer documents4.3Chronological filing4.4Annual waste report4.5E-PRTR register4.6Environmental permits4.7Activity licence4.8Environmental inspections4.9Deadlines and obligations4.10Practice: chronological filing for one quarter
5.1Discharge of washing water5.2Oil separators5.3Discharge ordinances5.4Protection of contaminated soils5.5Royal Decree 9/2005 on soils5.6Bunds and spill containment5.7Spill kits5.8Separator maintenance5.9Discharge analyses5.10Case study: water management plan for a workshop
6.1REACH Regulation6.2CLP Regulation and safety data sheets6.3Occupational exposure to solvents6.4Environmental limit values6.5Isocyanates and restrictions6.6Respiratory protective equipment6.7Ventilation and local exhaust6.8Storage of flammable materials6.9Explosive atmospheres in booths6.10Laboratory: assessment of solvent exposure
7.1ISO 14001 applied to workshops7.2EMAS Regulation7.3Internal compliance audits7.4Environmental indicators7.5Management of non-conformities7.6Staff training7.7Environmental liability7.8Penalty regime7.9Communication with the authorities7.10Workshop exercise: compliance audit of a workshop
8.1Workshop diagnosis8.2VOC emissions inventory8.3Waste inventory8.4Applicable legal review8.5VOC reduction plan8.6Waste management plan8.7Documentary system8.8Indicators and monitoring8.9Report and presentation8.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and a dedicated technical tutor. No fixed timetable: students progress at their own pace within the intake, which allows them to combine it with work.
Each module combines theory, guided reading of the original standard and applied exercises. The software used is advanced Excel, Power BI, SAP EHS, QGIS, in free, academic or trial versions. The case studies are based on real solvent balance procedures for a spray booth, documentary environmental compliance audits and inspections of waste storage areas. Assessment is continuous per module, plus the final integrating project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Explain the origin and impact of volatile organic compounds.
Develop solvent management and emission reduction plans.
Classify, store and trace hazardous workshop waste.
Manage environmental permits, records and declarations.
Prevent water and soil contamination from the activity.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient command of Spanish to follow technical regulatory texts.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme comprises 800 hours in total, spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with a full-time job.
The programme uses advanced Excel, Power BI, SAP EHS and QGIS. Free, academic or trial versions are used, and the tutor indicates the open-source alternative where one exists.
A SEIUM diploma upon passing the continuous assessment and the integrating project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised towards the higher-level programme. Please check the recognition policy when you enrol.
Related programmes
Postgraduate Diploma in DfAM and Tooling/Pattern Prototyping
800-hour online Postgraduate Diploma in DfAM and Tooling/Pattern Prototyping. 8 modules covering ISO/ASTM 52910 (design guidelines for additive manufacturing), ISO/ASTM 52900 (additive manufacturing: terminology) and nTop.…
Diploma in Finishes: Stains, Shellac and Varnishes
Online postgraduate diploma of 800 hours in wood finishes: stains, shellac and varnishes. 8 modules covering wood and its finish, stains and dyes, shellac and French…
Postgraduate Diploma in Glass and Rubber Cutting and Fitting
Online 800-hour Postgraduate Diploma in Glass and Rubber Cutting and Fitting. 8 modules covering UNECE Regulation No. 43 (safety glazing), ANSI/AGRSS 002 (automotive glass replacement) and…
More in Restoration & Classics
All Restoration & Classics programmes → · How to apply · Fees & financing · Scholarships