Postgraduate Diploma in Integration of Conductors and Sensors in Textiles
Online 800-hour Postgraduate Diploma in Integration of Conductors and Sensors in Textiles. 8 modules with IEC 63203 (wearable electronic devices, series), EN 16812 (conductive textiles, linear resistance) and KiCad. Assigned tutor and open enrolment.
Postgraduate Diploma in Integration of Conductors and Sensors in Textiles — studying from Ireland
Ireland is a significant centre for medical technology and pharmaceuticals, with many international device manufacturers and a strong cluster of biomedical research in Galway, Limerick and Dublin. Biomechanics, wearable sensing and occupational health technologies are developed by companies, hospitals and research institutes such as the National University of Ireland Galway's research groups. Engineers in this area design medical devices, rehabilitation systems and safety monitoring solutions under strict regulatory requirements. Oversight comes from the Health Products Regulatory Authority and the Health and Safety Authority.
Fees for Ireland: €895 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Will this qualification be recognised by professional bodies in Ireland for this area?
SEIUM's qualifications are private qualifications, not official state degrees, and they are not accredited by any national body. Recognition is decided by individual employers or the relevant body. In Ireland, engineers in this field may look to Engineers Ireland for professional membership, but completing a SEIUM programme does not by itself grant membership of any body. Check requirements directly with the body concerned before enrolling.
How might this training be used by employers in Ireland working in this area?
Employers in Ireland decide for themselves how much weight to give a private online qualification. Many assess it alongside your existing experience, the final project and your portfolio. Roles in medical devices, occupational health and workplace safety may value specialist knowledge, but there is no guarantee of recognition or of any salary or promotion outcome. Ask prospective employers whether they would accept the qualification.
Can I study this alongside a full-time job, and does my employer need to fund it?
Programmes are fully online and taught in English, so you can study from home at your own pace around work. Master's programmes are 1,900 hours, postgraduate diplomas 800 hours and specialist courses 300 hours, so plan your weekly commitment accordingly. Fees can be paid in instalments, and employer sponsorship is possible if your company agrees. Each student is assigned a technical tutor for support.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Describe the architectures of electronic textiles.
Select conductive materials for textile integration.
Apply integration processes such as embroidery, weaving and printing.
Design textile sensors for pressure, strain and biopotentials.
Integrate electronics and power supply into the garment.
Evaluate reliability against washing, flexing and abrasion.
Develop a sensorised garment ready for prototyping.
Who it's for
- Smart textile engineer who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Wearable product designer who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Flexible electronics engineer who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Textile laboratory technician who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Researcher in conductive materials who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Wearables reliability engineer who wants to specialise in Integration of Conductors and Sensors in Textiles.
- Graduates in engineering or sciences seeking to enter the textile industry.
What you'll work with
- IEC 63203 (wearable electronic devices, series)
- EN 16812 (conductive textiles, linear resistance)
- ISO 6330 (washing and drying procedures for testing)
- EN 1149-1 (protective clothing, electrostatic properties)
- IEC 60068-2 (environmental testing)
- ISO 105-X12 (colour fastness to rubbing)
- Regulation (EC) 1907/2006 (REACH)
8 modules · 800 h
1.1Concept of e-textiles and textile wearables1.2Integration levels: attached, integrated and intrinsic1.3Textile structures: woven, knitted and nonwoven1.4Fibres and their mechanical behaviour1.5Comfort and washability requirements1.6Applications in health, sport and defence1.7Market and value chain1.8Standards: CEN/TR 162981.9Durability challenges1.10Case study: analysis of a commercial smart garment
2.1Metal yarns and silver-coated yarns2.2Carbon fibres and nanotubes2.3Conductive polymers: PEDOT:PSS2.4Graphene and nanomaterials2.5Conductive inks2.6Surface and linear resistance2.7Electrical behaviour under deformation2.8Corrosion and oxidation2.9Material selection by application2.10Laboratory: measuring the resistance of conductive yarns
3.1Embroidery of conductive tracks3.2Weaving and knitting with conductive yarns3.3Screen printing and printing on textiles3.4Lamination and heat sealing3.5Dip coating3.6Integration of rigid components3.7Textile–electronics interconnections3.8Encapsulation and protection3.9Scaling up to industrial production3.10Practice: embroidering a circuit onto fabric
4.1Textile electrodes for ECG and EMG4.2Resistive strain sensors4.3Capacitive pressure sensors4.4Textile temperature sensors4.5Humidity and sweat sensors4.6Respiration sensors4.7Fibre-optic sensors4.8Characterisation: sensitivity, hysteresis and drift4.9Skin–electrode impedance4.10Laboratory: characterisation of a strain sensor
5.1Microcontrollers for wearables5.2Signal conditioning5.3Bluetooth LE communication5.4Textile antennas5.5Flexible batteries5.6Energy harvesting: triboelectric and thermoelectric5.7Power management5.8Flexible PCB design5.9Detachable connectors for washing5.10Workshop: designing an acquisition module for a garment
6.1Washing tests according to ISO 63306.2Abrasion and flexing tests6.3Tensile and fatigue tests6.4Accelerated ageing6.5Electrical safety and biocompatibility6.6Electromagnetic compatibility6.7Failure mode analysis6.8Durability metrics6.9Standardisation in e-textiles6.10Practice: washing cycle testing on electrodes
7.1User-centred garment design7.2Pattern making and sensor placement7.3Ergonomics and fit7.4Aesthetics and acceptance7.5Data processing and mobile application7.6Regulatory requirements for medical use7.7Sustainability and recycling7.8Costs and manufacturing7.9User validation7.10Case study: cardiac monitoring T-shirt
8.1Definition of the application8.2Material selection8.3Sensor and track design8.4Textile prototyping8.5Electronic integration8.6Performance testing8.7Durability testing8.8User validation8.9Report and presentation8.10Final review with the tutor
How you'll learn
Training 100 % online on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, which makes it possible to combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is KiCad, CLO 3D, COMSOL Multiphysics, MATLAB, in free, academic or evaluation versions. Tests are studied using real procedures for washing cycles and resistance measurement, flexing and abrasion tests, and characterisation of textile sensors. Assessment is continuous by module, plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Describe the architectures of electronic textiles.
Select conductive materials for textile integration.
Apply integration processes such as embroidery, weaving and printing.
Design textile sensors for pressure, strain and biopotentials.
Integrate electronics and power supply into the garment.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. A university degree is not required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow technical standards documentation.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours spread over 6 to 8 months. That is an average of 10 to 15 hours per week, compatible with full-time work.
You will work with KiCad, CLO 3D, COMSOL Multiphysics and MATLAB. Free, academic or evaluation versions are used, and the tutor indicates a free alternative where one exists.
A SEIUM diploma, awarded on passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or diploma in the same area are credited towards the higher-level programme. Check the credit transfer policy when you enrol.
Related programmes
Postgraduate Diploma in Sampling of Chemical and Biological Agents
Online 800-hour Postgraduate Diploma in Sampling of Chemical and Biological Agents. 8 modules with Royal Decree 374/2001 (chemical agents), Royal Decree 664/1997 (biological agents) and IHSTAT…
Postgraduate Diploma in Alert Design, Automation Levels and SA
Online 800-hour Postgraduate Diploma in Alert Design, Automation Levels and SA. 8 modules covering IEC 62682 / ISA-18.2 (alarm management), EEMUA 191 (design and management of…
Postgraduate Diploma in TRIPOD/HFACS Methodologies and Evidence
The Postgraduate Diploma in TRIPOD/HFACS Methodologies and Evidence focuses on the study of risk analysis and human factors in the investigation of incidents and accidents. It…
More in Health, Biomechanics, Wearables & Operational Safety
All Health, Biomechanics, Wearables & Operational Safety programmes → · How to apply · Fees & financing · Scholarships