Master’s in Heavy-Duty and Off-Highway Electrification Engineering — Trucks, Mining, Construction
Online master's programme of 1,900 hours in heavy-duty and off-highway electrification engineering for trucks, mining and construction. 12 modules covering heavy-duty powertrains and batteries, long-haul trucks, electrified mining, construction and agricultural machinery, heavy-duty charging infrastructure, safety and regulation, telematics and TCO, with an assigned technical tutor.
Master’s in Heavy-Duty and Off-Highway Electrification Engineering — Trucks, Mining, Construction — studying from Ireland
Ireland's electromobility and energy storage sector is growing, supported by national climate and transport policy, public charging infrastructure programmes and renewable electricity generation. Research institutions and companies in Ireland work on battery systems, power electronics, hydrogen technologies and grid integration. Engineers in this area contribute to charging network design, battery management, energy storage projects and the decarbonisation of transport and industry. Policy and regulation are coordinated by government departments and the national energy regulator, alongside European rules on batteries and emissions.
Fees for Ireland: €9,930 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which Irish bodies regulate or recognise electromobility, battery and hydrogen engineering?
Sustainable energy and related policy in Ireland involves the Sustainable Energy Authority of Ireland and the Department of the Environment, Climate and Communications. Engineers Ireland sets professional standards for engineers. SEIUM's qualifications are private and not accredited by any national body, so recognition depends on employers or the relevant body, and you should verify it before enrolling.
Do Irish employers in batteries and hydrogen value private online qualifications?
Ireland has growing interest in electrification, energy storage and hydrogen, with employers in energy, transport and manufacturing. They typically prioritise experience, technical competence and relevant degrees. A private online qualification may support an application, but how it is judged is for each employer. No career outcome can be guaranteed.
Can I combine this with a job, and does the workload suit part-time study?
The programme is fully online and taught in English, so you can study from anywhere in Ireland without travel or a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 and specialist courses 300. You will have an assigned technical tutor, fees can be paid in instalments, and employer sponsorship may be possible if your employer supports energy-transition training.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the duty cycles of heavy vehicles and machinery.
Size high-power electric powertrains.
Design batteries for heavy-duty applications.
Plan charging infrastructure for mines, construction sites and corridors.
Apply machinery safety and high-voltage regulations.
Calculate the total cost of ownership of heavy-duty solutions.
Develop a heavy-duty or off-highway electrification project.
Who it's for
- Heavy-vehicle electrification engineers looking to deepen their expertise in trucks and off-highway machinery.
- Construction machinery engineers moving towards electric equipment.
- Engineers working on electrified mining operations.
- Traction systems engineers.
- Logistics decarbonisation consultants.
- Industrial fleet managers planning the transition to electric.
- Engineering or science graduates seeking to enter road transport, mining or construction.
What you'll work with
- Regulation (EU) 2019/1242 (CO2 emission standards for heavy-duty vehicles)
- Directive 2006/42/EC (machinery)
- UN ECE R100 (electric powertrain safety)
- ISO 6469-3 (electrical safety of electric vehicles)
- ISO 25119 (functional safety of agricultural and forestry machinery)
- ISO 13849-1 (safety-related parts of control systems)
- Regulation (EU) 2023/1230 (machinery)
- SAE J3271 (Megawatt Charging System, MCS)
- MATLAB/Simulink
- GT-SUITE
- AVL CRUISE M
- VECTO
- Python
12 modules · 1900 h
1.1Segments: trucks, mining, construction, agriculture1.2Duty cycles and power demands1.3Battery, catenary and hydrogen1.4CO2 standards for trucks1.5Manufacturers and market offering1.6Technology maturity by segment1.7Weight and volume constraints1.8Infrastructure as a limiting factor1.9Pioneering heavy-fleet experiences1.10Case study: diesel versus electric truck comparison
2.1Electric axles for trucks2.2Central motors with transmission2.3High-voltage, high-current inverters2.4800 V and higher architectures2.5Electric power take-offs2.6Multi-speed truck transmissions2.7Component cooling2.8Regenerative braking on descents2.9Sizing the traction drivetrain2.10Lab: electric axle sizing
3.1Long-haul energy requirements3.2LFP versus NMC chemistry3.3Modular, scalable packs3.4Thermal management under demanding cycles3.5Service life under intensive cycles3.6Battery swapping3.7Mechanical protection in mining3.8Fire safety3.9Second life of heavy-duty batteries3.10Practical exercise: pack sizing for a dump truck
4.1Motorway energy consumption4.2Aerodynamics and rolling resistance4.3Range and driving times4.4Megawatt charging during rest stops4.5Maximum weights and EV allowance4.6Eurovignette and CO2 tolls4.7Comparison with hydrogen4.8Operation on European corridors4.9Pioneering fleet experiences4.10Workshop: Madrid–Valencia route simulation
5.1Electric dumpers and loaders5.2Underground ventilation and air quality5.3Trolley assist in open-pit mines5.4Charging in mining environments5.5Battery swapping at the mine5.6Electrical safety in mining5.7Mining safety regulations5.8Reducing ventilation costs5.9Electrified mine case studies5.10Case study: underground mine with an electric fleet
6.1Electric excavators and mini-excavators6.2Electric hydraulics and pumps6.3Cable power supply on site6.4On-site charging with mobile batteries6.5Noise and emissions in urban areas6.6Duty cycles and range6.7Cranes and lifting equipment6.8Public tender requirements6.9Retrofitting existing machinery6.10Lab: electric excavator duty cycle
7.1Electric and hybrid tractors7.2Electric implements and AEF7.3Electric agricultural robots7.4Charging on farms7.5Solar self-consumption on farms7.6Seasonal duty cycles7.7Autonomous tractors and GNSS guidance7.8ISOBUS compatibility with implements7.9Economics of agricultural electrification7.10Practical exercise: electric vineyard tractor
8.1High-power depot charging8.2MCS standard for trucks8.3Charging at mines and construction sites8.4Mobile site substations8.5eHighway catenary for trucks8.6Stationary support batteries8.7Generators and microgrids8.8Grid connection in remote areas8.9Corridor planning8.10Workshop: open-pit mine infrastructure
9.1High-voltage electrical safety9.2The Machinery Directive and its Regulation9.3ISO 6469 requirements9.4Functional safety: ISO 25119 and ISO 138499.5UN ECE R100 rules for trucks9.6Heavy-duty CO2 Regulation9.7Staff training and authorisation9.8Rescue procedures9.9Signage and warnings9.10Case study: dumper risk analysis
10.1Energy and health monitoring10.2Shift and charging management10.3Predictive maintenance of electrical components10.4Thermal management in extreme climates10.5Operator training10.6Productivity indicators10.7Integration with site management systems10.8Cybersecurity of connected machinery10.9Utilisation optimisation10.10Practical exercise: mining fleet dashboard
11.1TCO of electric trucks11.2TCO of construction machinery11.3Energy prices and contracts11.4Residual value of batteries11.5Decarbonisation grants and funds11.6Carbon credits11.7Machinery rental models11.8Technical risk analysis11.9Cost scenarios to 203511.10Workshop: TCO of a 40-tonne truck
12.1Selecting the segment and operation12.2Duty-cycle analysis12.3Powertrain and battery sizing12.4Charging infrastructure design12.5Safety and regulatory assessment12.6Total cost of ownership calculation12.7Deployment plan12.8Technical and economic conclusions12.9Master's Thesis report12.10Master's Thesis: defence before a panel
How you'll learn
Training is 100% online on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so it fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is MATLAB/Simulink, GT-SUITE, AVL CRUISE M, VECTO and Python, in free, academic or evaluation versions. Testing is studied through real procedures for machinery duty-cycle simulation, battery sizing for heavy-duty use and truck TCO analysis. Assessment is continuous by module, plus the final Master's Thesis.
Standards covered: Regulation (EU) 2019/1242, Directive 2006/42/EC, UN ECE R100, ISO 6469-3, ISO 25119, ISO 13849-1, Regulation (EU) 2023/1230, SAE J3271.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- A university degree in engineering, science or architecture, or equivalent demonstrable professional experience.
- An internet connection and a computer capable of running the programme's software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 1,900 hours over 12–14 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with MATLAB/Simulink, GT-SUITE, AVL CRUISE M, VECTO, Python, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the Master's Thesis. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed in a course or postgraduate diploma in the same area are recognised in the higher programme. Ask about the recognition policy when you enrol.
A degree in engineering, science or architecture (or equivalent professional experience), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Master’s in Range Extenders and Micro-Hybrids Engineering — 48 V, Regeneration and Coasting Strategy
Online master's programme of 1,900 hours in range extender and micro-hybrid engineering (48 V, regeneration and coasting strategy): 12 modules covering light electrification and range extenders,…
Master’s in Advanced BMS and Diagnostics/Prognostics Engineering
Online master's programme of 1,900 hours in advanced BMS engineering and diagnostics/prognostics: 12 modules covering BMS functions and hardware, battery models, SOC, SOH and SOP estimation,…
Master’s in Battery Quality and Testing Engineering — IEC/UN 38.3, Abuse Tests, Traceability and Passport
Online master's programme of 1,900 hours in battery quality and testing engineering (IEC/UN 38.3, abuse tests, traceability and battery passport): 12 modules covering quality across the…
More in Electromobility, Batteries & Hydrogen
All Electromobility, Batteries & Hydrogen programmes → · How to apply · Fees & financing · Scholarships