HSE Safety Course in Offshore Operations
Online 300-hour course in HSE safety in offshore operations. 6 modules covering Directive 2013/30/EU on the safety of offshore oil and gas operations, ISO 45001 Occupational health and safety management systems and BowTieXP. Assigned tutor and open enrolment.
HSE Safety Course in Offshore Operations — studying from Ireland
Ireland's maritime sector spans shipping services, offshore energy, marine research and sports boating, with ports such as Dublin, Cork and Shannon Foynes supporting trade and logistics. The offshore wind and marine renewables sector is growing, creating demand for engineers in structures, marine systems and subsea technology. Marine research institutions such as the Marine Institute contribute to ocean science and offshore technology. Oversight is provided by the Irish Maritime Administration within the Department of Transport and by classification and safety bodies.
Fees for Ireland: €743 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which bodies in Ireland regulate or recognise marine and offshore engineering professionals?
In Ireland, marine matters fall under the Irish Maritime Development Office and the Irish Maritime Administration, while the Marine Survey Office handles vessel safety. Professional engineering membership is usually sought through Engineers Ireland. SEIUM's qualifications are private and not accredited by these bodies, so they do not grant certificates of competency or professional status.
How do employers in Ireland's marine and offshore sectors view private online qualifications?
Employers in Ireland's offshore energy, shipping and nautical industries generally prioritise certified competencies and sea-going or project experience. A private online qualification may complement your background but is judged at each employer's discretion. There is no guarantee it will be accepted for any particular role.
Can I study this online from Ireland and do I need a visa or to relocate?
You can study from home in Ireland, as the programme is fully online and taught in English, so no student visa is needed to study from home. Programme lengths are 300, 800 or 1,900 hours depending on the course. Fees can be paid in instalments, and employer sponsorship is possible. Each student is assigned a technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Implement HSE management systems compliant with European offshore regulations.
Identify hazards and assess major risks using HAZID, HAZOP and bow-tie.
Apply the principles of process safety and well control.
Manage work permits and high-risk operations.
Plan the response to emergencies and spills.
Investigate incidents using root cause analysis.
Develop a comprehensive HSE plan for an offshore installation.
Who it's for
- Offshore HSE technician wishing to specialise in HSE Safety in Offshore Operations.
- Process safety engineer wishing to specialise in HSE Safety in Offshore Operations.
- Emergency coordinator wishing to specialise in HSE Safety in Offshore Operations.
- Management systems auditor wishing to specialise in HSE Safety in Offshore Operations.
- Work permit supervisor wishing to specialise in HSE Safety in Offshore Operations.
- Offshore environment manager wishing to specialise in HSE Safety in Offshore Operations.
- Graduates in engineering or sciences seeking to enter the oil and gas sector.
What you'll work with
- Directive 2013/30/EU on the safety of offshore oil and gas operations
- ISO 45001 Occupational health and safety management systems
- ISO 17776 Major accident hazard management in offshore installations
- ISO 14001 Environmental management systems
- ISO 13702 Control and mitigation of fires and explosions on offshore installations
- IEC 61511 Functional safety of safety instrumented systems
- Directive 2014/34/EU on equipment for potentially explosive atmospheres
- IOGP Report 459 Life-Saving Rules
6 modules · 300 h
1.1Leadership and safety culture1.2ISO 45001 and ISO 14001 in offshore installations1.3Directive 2013/30/EU and the competent authority1.4Major accident report1.5Safety and environmental critical elements1.6Independent verification of barriers1.7HSE management of contractors1.8Leading and lagging indicators1.9Incident notification requirements1.10Case study: HSE management system audit
2.1HAZID and HAZOP techniques2.2Bow-tie analysis and barriers2.3Quantitative risk analysis2.4ALARP criteria and tolerability2.5Fire and explosion risk2.6Evacuation, escape and rescue analysis2.7Dropped objects and lifting operations2.8Vessel collision risk2.9Task safety analysis2.10Laboratory: loss of containment bow-tie
3.1Process safety versus personal safety3.2Lessons from Piper Alpha and Deepwater Horizon3.3Well barriers and BOP preventers3.4Emergency shutdown and depressurisation3.5Fire and gas detection3.6Active and passive fire protection3.7ATEX classified zones3.8Management of change3.9Integrity and barrier verification3.10Workshop: review of a cause-and-effect matrix
4.1Work permit system4.2Isolation and lock-out tag-out4.3Work at height and over water4.4Lifting operations and offshore cranes4.5Entry into confined spaces4.6Hydrogen sulphide exposure4.7Helicopter transport and BOSIET training4.8Fatigue, shifts and human factors4.9Occupational health and onboard medical assistance4.10Practice: permit for a high-risk task
5.1Discharge and emissions management5.2Oil spill prevention and response5.3Installation emergency plan5.4Response organisation and command5.5Drills and periodic exercises5.6Man overboard and rescue boats5.7Incident investigation methods5.8Root cause analysis5.9Dissemination of lessons learned5.10Case study: lifting incident investigation
6.1Description of the installation and operations6.2Hazard register6.3Major hazard assessment6.4Barriers and critical elements6.5Emergency response plan6.6Training and competency programme6.7Indicators and audits6.8Continuous improvement plan6.9Report and presentation6.10Final review with the tutor
How you'll learn
100 % online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: students progress at their own pace within the intake, allowing it to be combined with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is BowTieXP, DNV Phast, Gexcon FLACS, Enablon, in free, academic or evaluation versions. Practical work is based on real procedures: bow-tie analysis of a major hazard scenario, emergency drill on an offshore installation, root cause investigation of an incident. Assessment is continuous per module plus the final integrative project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Implement HSE management systems compliant with European offshore regulations.
Identify hazards and assess major risks using HAZID, HAZOP and bow-tie.
Apply the principles of process safety and well control.
Manage work permits and high-risk operations.
Plan the response to emergencies and spills.
Where this takes you
Requirements
- No prior degree required.
- Internet connection and a computer capable of running the programme's software.
- Sufficient level of Spanish to follow the reading of technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours spread over 3 to 5 months. That is between 10 and 15 hours per week on average, compatible with full-time work.
The course works with BowTieXP, DNV Phast, Gexcon FLACS and Enablon. Free, academic or evaluation versions are used, and the tutor indicates the free alternative where one exists.
A SEIUM own diploma upon passing the continuous assessment and the integrative project. It is in-house training, not an official qualification from the Ministry.
Yes. Modules passed in a course or postgraduate diploma in the same area are credited towards the higher programme. Check the credit transfer policy when you enrol.
Related programmes
Course in Shipyard Digitalisation with Naval BIM
Online 300-hour course in shipyard digitalisation with naval BIM. 6 modules covering ISO 19650 (information management with BIM), ISO 10303 (STEP, product data exchange) and AVEVA…
Lean Manufacturing Course in Shipyards
Online 300-hour course in Lean Manufacturing in shipyards. 6 modules covering ISO 13053-1:2011, ISO 22400-2:2014 and Minitab. Assigned tutor and open enrolment.
Naval Equipment Type Approval Course
Online 300-hour course in naval equipment type approval. 6 modules covering Directive 2014/90/EU on marine equipment, the International Code of Life-Saving Appliances (IDS/LSA Code) and LabVIEW.…
More in Naval, Offshore & Sports Nautical
All Naval, Offshore & Sports Nautical programmes → · How to apply · Fees & financing · Scholarships