FMVSS Homologation Course in the US
Online course of 300 hours in FMVSS vehicle certification in the USA. 6 modules covering the US vehicle safety regulatory system, FMVSS crash avoidance and crashworthiness standards, certification, labelling and registration, and defects, recalls and liability, with an assigned technical tutor.
FMVSS Homologation Course in the US — studying from Ireland
Ireland's regulated industries, including aviation, medical devices, energy, transport and food, require rigorous safety, reliability and compliance processes. Engineers in regulation, safety and homologation roles prepare certification evidence, perform reliability and risk analysis and manage conformity assessment. Key regulators such as the Health and Safety Authority, the Irish Aviation Authority and the Health Products Regulatory Authority set requirements that span multiple sectors. National standards are maintained by the National Standards Authority of Ireland, which represents Ireland within European and international standardisation.
Fees for Ireland: €448 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which Irish bodies handle regulation and homologation, and does this qualification relate to them?
In Ireland, regulatory and safety matters involve bodies such as the Health and Safety Authority and the National Standards Authority of Ireland for standards work. Professional engineering status is typically pursued through Engineers Ireland. SEIUM's qualifications are private and not accredited by these bodies, so they do not grant registration, approval or homologation rights.
How do Irish employers in RAMS and safety-critical sectors regard private online qualifications?
Employers in safety-critical industries in Ireland usually require verifiable competence and recognised certifications for RAMS and homologation roles. A private online qualification may complement your experience, but whether it counts is entirely at the employer's discretion. There is no guarantee of recognition or of any role.
How much time does the programme take, and can I pay in instalments?
The programme is fully online and taught in English, so you can study from Ireland at your own pace. Durations are 300, 800 or 1,900 hours depending on the course. Fees can be paid in instalments, employer sponsorship is possible if your company agrees, and each student receives an assigned technical tutor.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Understand the vehicle self-certification system in the United States.
Interpret the main FMVSS crash avoidance and crashworthiness standards.
Compare FMVSS requirements with equivalent UNECE regulations.
Apply federal certification, VIN and labelling requirements.
Manage vehicle importation and the available exemptions.
Manage defect reports and recall campaigns before NHTSA.
Draw up an FMVSS certification plan for a vehicle.
Who it's for
- FMVSS compliance engineers
- International homologation engineers
- Regulatory affairs managers
- Product safety engineers
- Recall and defect specialists
- Vehicle import technicians
- Engineering or science graduates looking to move into vehicle manufacturing
What you'll work with
- 49 CFR Part 571 (FMVSS) (Federal Motor Vehicle Safety Standards)
- 49 CFR Part 567 (certification)
- 49 CFR Part 573 (defect and noncompliance responsibility and reports)
- 49 CFR Part 565 (vehicle identification number requirements)
- 49 CFR Part 555 (temporary exemption from motor vehicle safety standards)
- 49 CFR Part 572 (anthropomorphic test devices)
- 49 CFR Part 579 (reporting of information about potential defects (early warning))
- 49 CFR Part 577 (defect and noncompliance notification)
- NHTSA vPIC
- LS-DYNA
- NI DIAdem
- Jama Connect
- Siemens Teamcenter
6 modules · 300 h
1.1Self-certification versus type approval1.2The National Traffic and Motor Vehicle Safety Act1.3Role of NHTSA and the Department of Transportation1.4Structure of 49 CFR Part 5711.5Rulemaking procedures and public comments1.6NHTSA TP laboratory test procedures1.7Relationship with the 1998 Global Agreement1.8The US NCAP programme1.9Differences from UNECE regulation1.10Workshop: locating the requirements applicable to a vehicle
2.1FMVSS 100 series: overview2.2FMVSS 108: lamps and reflective devices2.3FMVSS 111: rear visibility and cameras2.4FMVSS 126: electronic stability control2.5FMVSS 135: light vehicle brake systems2.6FMVSS 138: tyre pressure monitoring2.7FMVSS 101 and 102: controls and transmissions2.8Automatic emergency braking requirements under development2.9Differences from equivalent UN Regulations2.10Practical exercise: comparison between FMVSS 108 and UN R48
3.1FMVSS 200 series: overview3.2FMVSS 208: occupant crash protection3.3FMVSS 214: side impact protection3.4FMVSS 216: roof crush resistance3.5FMVSS 226: ejection mitigation3.6FMVSS 213: child restraint systems3.7FMVSS 301 and 305: fuel system and high-voltage integrity3.8Test dummies regulated in 49 CFR Part 5723.9Advanced airbags and out-of-position occupants3.10Case study: analysis of an FMVSS 208 test
4.1Certification label under 49 CFR Part 5674.2VIN structure under 49 CFR Part 5654.3Manufacturer identification under 49 CFR Part 5664.4Multi-stage manufacturers and alterers4.5Vehicle importation and the HS-7 form4.6Registered importers and non-conforming vehicles4.7Exemptions under 49 CFR Part 5554.8EPA requirements and fuel economy labelling4.9Due care in self-certification4.10Practical exercise: preparing the certification label
5.1Defect reports under 49 CFR Part 5735.2Owner notification under 49 CFR Part 5775.3TREAD early warning reporting under 49 CFR Part 5795.4Office of Defects Investigation investigations5.5Civil penalties and consent orders5.6Standing general orders on automated driving5.7Product liability for defective products5.8Management of evidence and technical documentation5.9Communication with NHTSA5.10Case study: managing a recall campaign
6.1Selection of the vehicle and its classification6.2Matrix of applicable FMVSS standards6.3Gap analysis against the European version6.4Compliance test plan6.5Due care documentation6.6Labelling and registration as a manufacturer6.7Defect monitoring plan6.8Market entry strategy6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online study on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original regulations and applied exercises. The working software is NHTSA vPIC, LS-DYNA, NI DIAdem, Jama Connect and Siemens Teamcenter, in free, academic or evaluation versions. Practical work is based on real procedures: compliance tests following NHTSA TP procedures, due care audits in self-certification and management of recall campaigns. Assessment is continuous, module by module, plus the final project.
Standards covered: 49 CFR Part 571 (FMVSS); 49 CFR Part 567; 49 CFR Part 573; 49 CFR Part 565; 49 CFR Part 555; 49 CFR Part 572; 49 CFR Part 579; 49 CFR Part 577.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- An internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with NHTSA vPIC, LS-DYNA, NI DIAdem, Jama Connect and Siemens Teamcenter, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Railway RAMS Course
Online 300-hour Course in Railway RAMS. 6 modules covering EN 50126-1 and EN 50126-2 (railway RAMS), EN 50129 (safety-related electronic systems) and Isograph Reliability Workbench. Assigned…
ISO 15005/15007 Course Applied to Driving Interfaces
Online 300-hour course in ISO 15005/15007 applied to driving interfaces. 6 modules covering ISO 15005 (dialogue management principles), ISO 15007 (measurement of visual behaviour) and Smart…
HFACS Methodology in Human Causes Course
Online course of 300 hours in HFACS methodology for human causes. 6 modules covering ICAO Annex 19 (Safety Management), ICAO Doc 9859 (Safety Management Manual) and…
More in Regulation, Safety, RAMS & Homologation
All Regulation, Safety, RAMS & Homologation programmes → · How to apply · Fees & financing · Scholarships