Diploma in Sectoral Standards and Cabin Ergonomics
Online postgraduate diploma of 800 hours in sector standards and cab ergonomics: 8 modules covering applied cab ergonomics, railway cabs, heavy vehicle cabs, mobile machinery cabs, ship bridges, ergonomic assessment methods and regulatory integration, with an assigned technical tutor.
Diploma in Sectoral Standards and Cabin Ergonomics — studying from Ireland
Ireland's technology and medical device sectors depend on strong product design and user experience capabilities, particularly in Dublin, Cork and Galway. Multinational software companies, medical technology firms and design consultancies employ product designers, interaction designers and human-machine interface specialists. Engineers in this area combine usability research, prototyping and engineering constraints to deliver products that meet both market and regulatory expectations. Professional practice is supported by national design and engineering bodies, with medical product work often guided by European and national regulatory frameworks.
Fees for Ireland: €1,290 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Is there an Irish professional body for design and HMI engineering?
Ireland's design profession is represented by bodies such as the Irish Design Association, while engineering registration runs through Engineers Ireland. There is no statutory licence for HMI or product design. SEIUM's qualifications are private and not accredited by any national body, so recognition is for employers and the relevant professional bodies to decide, and you should confirm this with them.
Do Irish product and design employers value private online study in HMI?
Irish product, medtech and software design employers generally focus on portfolios, user research experience and practical outcomes. A private online qualification may help your profile, but its weight is at each employer's discretion. We cannot guarantee employment or recognition, so present your portfolio strongly alongside any study.
How much time does this need and do I need to be fluent in English?
The programme is 100% online and taught in English, so good English for reading, writing and presenting is essential. There is no need for a visa to study from Ireland. Master's programmes total 1,900 hours, postgraduate diplomas 800 and specialist courses 300. An assigned technical tutor supports you, fees can be paid in instalments, and employer sponsorship may be possible.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Apply ergonomic principles to the design of driving and control cabs.
Interpret sector standards for railway, maritime and machinery cabs.
Assess operator visibility, reach and posture.
Analyse the thermal, acoustic and vibration environment of the workstation.
Use digital manikins and simulators to assess cabs.
Build regulatory matrices for multi-sector projects.
Design the conceptual layout of a cab in line with regulations.
Who it's for
- Cab ergonomics engineers
- Human factors specialists
- Interior designers for industrial vehicles
- Certification engineers
- Occupational health and safety consultants
- Rolling stock engineers
- Engineering or science graduates looking to enter the railway sector
What you'll work with
- EN 16186-1 (railway driver's cab: anthropometric data and visibility)
- ISO 6682 (earth-moving machinery: zones of comfort and reach for controls)
- SOLAS Convention Chapter V (safety of navigation)
- ISO 5006 (earth-moving machinery: operator's field of view)
- ISO 3471 (roll-over protective structures, ROPS)
- EN 15227 (crashworthiness of railway vehicle bodies)
- ISO 9241-210 (human-centred design for interactive systems)
- ISO 6396 (earth-moving machinery: noise at the operator's position)
- RAMSIS
- Tecnomatix Jack
- CATIA V5
- Tobii Pro Lab
8 modules
1.1Operator-centred design1.2Anthropometry and design percentiles1.3Fields of view and sight lines1.4Functional reach and control zones1.5Postures and musculoskeletal load1.6Thermal, acoustic and lighting environment1.7Mental workload and sustained attention1.8User diversity and accessibility1.9Postural assessment with RULA and REBA1.10Workshop: postural assessment of a driving position
2.1Cab dimensions to EN 16186-12.2Integration of displays and controls to EN 16186-22.3TSIs for locomotives and passenger rolling stock2.4Forward visibility and visibility of lateral signals2.5Driver's seat and its adjustment2.6ERTMS/ETCS DMI interface2.7Cab air conditioning to EN 148132.8Crashworthiness to EN 152272.9Access and emergency exits2.10Case study: audit of a regional train cab
3.1UNECE requirements for trucks and buses3.2Elongated cabs and Directive (EU) 2015/7193.3Driver direct vision and blind spots3.4Bus driver workstation3.5Mirrors and cameras to UNECE Regulation 463.6Controls and tell-tales to UNECE Regulation 1213.7Suspension seat and vibration3.8Sleeper berth and habitability on long-haul routes3.9Tachograph and driving times3.10Practical exercise: direct vision analysis with a digital manikin
4.1Comfort and reach zones to ISO 66824.2Operator visibility to ISO 50064.3ROPS and FOPS structures: ISO 3471 and ISO 34494.4Pressurisation and filtration to EN 156954.5Noise at the operator station to ISO 63964.6Whole-body vibration4.7Operator controls to ISO 109684.8Displays and assistance systems4.9Regulation (EU) 2023/1230 on machinery4.10Case study: redesign of excavator controls
5.1SOLAS Convention, Chapter V5.2MSC/Circ.982 ergonomic guidelines5.3Integrated navigation systems to IEC 61924-25.4Bridge visibility to SOLAS V/225.5Consoles and equipment layout5.6Bridge alert management5.7Night lighting and visual adaptation5.8Ship motions and motion sickness5.9Ergonomics of the engine control room5.10Workshop: layout of a bridge console
6.1Digital manikins and simulation6.2Full-scale mock-ups6.3Hierarchical task analysis6.4NASA-TLX and SUS questionnaires6.5Operator eye tracking6.6Driving and navigation simulators6.7Vibration and noise measurement6.8Thermal comfort with PMV and PPD indices6.9Trials with representative users6.10Laboratory: reach study with a digital manikin
7.1Map of applicable sector standards7.2Conformity assessment by sector7.3Notified bodies and classification societies7.4Cab technical file7.5Traceability of ergonomic requirements7.6Human-centred design to ISO 9241-2107.7Human factors in safety analysis7.8Monitoring regulatory changes7.9Ergonomic compliance audits7.10Case study: multi-sector regulatory matrix
8.1Selection of the sector and vehicle8.2User and task analysis8.3Applicable regulatory requirements8.4Conceptual cab layout8.5Visibility and reach study8.6Environmental assessment of the workstation8.7Validation with a digital manikin8.8Cab certification plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable materials, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within the intake, so you can combine the programme with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is RAMSIS, Tecnomatix Jack, CATIA V5 and Tobii Pro Lab, in free, academic or evaluation versions. Work is based on real procedures: ergonomic audits of railway and machinery cabs, visibility studies with digital manikins and workload assessments in simulators. Assessment is continuous for each module, plus the final project.
Standards covered: EN 16186-1, ISO 6682, SOLAS Convention Chapter V, ISO 5006, ISO 3471, EN 15227, ISO 9241-210, ISO 6396.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- Internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with RAMSIS, Tecnomatix Jack, CATIA V5 and Tobii Pro Lab, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software, and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Cargo Experience: Routes, Payments and Autonomy Anxiety
Online postgraduate diploma of 800 hours in Charging Experience: Routes, Payments and Range Anxiety. 8 modules covering charging technology, the psychology of range anxiety, route planning…
Diploma in Human Factors Applied to Critical Tasks ISO 15005/15007
Online postgraduate diploma of 800 hours in human factors applied to critical tasks (ISO 15005/15007): 8 modules covering human factors in critical systems, dialogue management to…
Diploma in Validation of Lighting Comfort and Visual Ergonomics
Online postgraduate diploma of 800 hours in lighting comfort validation and visual ergonomics: 8 modules covering visual ergonomics, lighting comfort, displays and legibility, measurement methods, subjective…
More in Design, HMI & Product
All Design, HMI & Product programmes → · How to apply · Fees & financing · Scholarships