Diploma in Ethics of Additive Manufacturing in Defence
Online postgraduate diploma of 800 hours in ethics of additive manufacturing in defence. 8 modules covering applied ethics, export controls on digital files, proliferation risk, technical data governance, product safety and organisational ethics governance, with an assigned technical tutor.
Diploma in Ethics of Additive Manufacturing in Defence — studying from Ireland
Ireland maintains a small defence force, the Defence Forces, which operates its own engineering corps and equipment maintenance capabilities. Defence procurement and development are handled through the Department of Defence, while much of the wider defence-related industrial activity involves dual-use technologies, electronics and communications systems supplied by domestic and international firms. Engineers in this area typically work on land vehicle maintenance, military communications, protective equipment and systems integration. Policy and procurement are governed by national and European frameworks, including EU defence initiatives.
Fees for Ireland: €1,790 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which Irish bodies oversee defence engineering and does a private qualification count?
Defence in Ireland is overseen by the Department of Defence, and the Defence Forces run their own training and technical structures. Engineers Ireland sets general professional engineering standards. SEIUM's qualifications are private and not state-awarded, and they are not accredited by any national body, so recognition for any defence-related role is decided by the relevant authority or employer.
Do Irish defence and land-systems employers hire people with private online qualifications?
Irish defence-related hiring is limited and often subject to security vetting and specific qualification requirements, so employers set their own criteria. A private online qualification may be taken into account alongside experience, but we cannot say how any employer will view it or guarantee any result. Check requirements for particular roles directly.
Can I study this from Ireland while working, and what is the workload?
Yes, the programme is 100% online and taught in English, so you can study from home without travel or a student visa. Master's programmes total 1,900 hours, postgraduate diplomas 800 and specialist courses 300. Each student has an assigned technical tutor, fees can be paid in instalments, and employer sponsorship may be possible. Plan your weekly hours realistically around your job.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Analyse the ethical dilemmas associated with additive manufacturing in the defence sector.
Apply export control and dual-use frameworks to digital files and raw materials.
Assess proliferation risks arising from distributed manufacturing.
Design governance policies for technical data and intellectual property.
Integrate product safety and liability criteria into the printing chain.
Draw up codes of conduct for additive engineering teams.
Communicate well-founded ethical decisions to committees and authorities.
Who it's for
- Compliance managers in additive manufacturing.
- Additive manufacturing engineers working on defence parts.
- Export control analysts dealing with technical data and CAD files.
- Technology ethics consultants.
- Technical information security managers.
- Quality auditors in the defence sector.
- Engineering or science graduates looking to enter the defence industry.
What you'll work with
- Regulation (EU) 2021/821 (dual-use items)
- Wassenaar Arrangement (export controls)
- ISO/ASTM 52900 (additive manufacturing terminology)
- Arms Trade Treaty (ATT) (international arms transfers)
- ISO/ASTM 52904 (metal PBF for critical applications)
- MIL-STD-882E (system safety)
- Common Position 2008/944/CFSP (EU control of military technology exports)
- Materialise Magics
- Autodesk Netfabb
- Ansys Additive
- NVivo
8 modules
1.1Ethical theories: deontology, consequentialism and virtue1.2Professional ethics of the defence engineer1.3Dual use and the dilemma of technological neutrality1.4The precautionary principle in emerging technologies1.5International humanitarian law: basic notions1.6Individual and corporate responsibility1.7Codes of conduct of professional engineering bodies1.8Ethics of defence-funded research1.9Governance of emerging technologies1.10Case study: analysis of a dual-use dilemma
2.1Processes according to ISO/ASTM 529002.2Powder bed fusion and directed energy deposition2.3Printing of technical polymers and composites2.4The digital chain: CAD, STL and slicing2.5Distributed and point-of-need manufacturing2.6Critical spare parts and part certification2.7Risks of non-conforming parts in service2.8Traceability of powder batches and parameters2.9Certifiable metallic and polymeric materials2.10Practical exercise: risk map of an additive workflow
3.1The dual-use regulation and control lists3.2The Wassenaar Arrangement and relevant categories3.3Intangible technology transfers3.4CAD files as controlled technology3.5ITAR and EAR: extraterritorial scope3.6Licences, authorisations and end-user certificates3.7Internal compliance: ICP programmes3.8Sanctions and cases of non-compliance3.9ECCN classification and military lists3.10Case study: classification of a technical data package
4.1Proliferation risk from decentralised printing4.2Non-state actors and access to the technology4.3Technical limitations as a natural barrier4.4Access controls on printers and materials4.5Marking and authentication of parts4.6The Arms Trade Treaty and manufacturing4.7The international debate on printed parts4.8Early-warning indicators in the supply chain4.9Printing of sensitive components: the regulatory debate4.10Workshop: risk scenario and mitigation measures
5.1Classification of technical information5.2Secure design repositories5.3Encryption and digital rights management5.4Blockchain for file traceability5.5Intellectual property in defence contracts5.6Licences for the use of technical data5.7Information leaks and response5.8Cybersecurity of connected printers5.9Version control and digital signatures for designs5.10Lab: design of a protected data flow
6.1System safety according to MIL-STD-882E6.2Qualification of processes and critical parts6.3Liability for manufacturing defects6.4Environmental impact and occupational health with metal powders6.5Sustainability and the circular economy in additive manufacturing6.6Ethics of replacing traditional suppliers6.7Transparency towards end users6.8Incident management and lessons learned6.9Insurance and warranty of parts manufactured in the field6.10Case study: in-service failure of a printed part
7.1Ethics committees and project review7.2Ethical impact assessment of new programmes7.3Codes of conduct for engineering teams7.4Whistleblowing channels and whistleblower protection7.5Training and ethical culture7.6Compliance indicators and auditing7.7Relations with authorities and regulators7.8Public communication and accountability7.9Management of conflicts of interest7.10Workshop: drafting a code of conduct for additive manufacturing
8.1Selection of the case and project scope8.2Analysis of stakeholders and interests8.3Identification of ethical and legal risks8.4Proposal of controls and safeguards8.5Technical data governance plan8.6Monitoring indicators8.7Reasoned ethical opinion8.8Implementation plan8.9Report and presentation8.10Final project: final review with the tutor
How you'll learn
100% online learning on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. There are no fixed timetables: you progress at your own pace within each intake, so the programme fits around your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is Materialise Magics, Autodesk Netfabb, Ansys Additive and NVivo, in free, academic or evaluation versions. Practical work is based on real procedures: ethical audit of a spare-parts printing workflow, risk assessment of CAD file dissemination and analysis of export control cases. Assessment is continuous by module plus the final project.
Standards covered: Regulation (EU) 2021/821, Wassenaar Arrangement, ISO/ASTM 52900, Arms Trade Treaty (ATT), ISO/ASTM 52904, MIL-STD-882E, Common Position 2008/944/CFSP.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 800 hours over 6–8 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with Materialise Magics, Autodesk Netfabb, Ansys Additive and NVivo, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in NATO/EU Industrial Independence Strategies
Online postgraduate diploma of 800 hours in NATO/EU industrial independence strategies: 8 modules covering the European defence industrial base, EU policies (EDF, ASAP, EDIRPA), NATO industrial…
Diploma in Critical UAS Detection
Online postgraduate diploma of 800 hours in critical UAS detection. 8 modules covering the UAS threat to infrastructure, radar, RF, electro-optical and acoustic detection, sensor fusion…
Diploma in the Ethics of Military Decarbonisation
600-hour online postgraduate diploma in the ethics of military decarbonisation: defence carbon footprint, climate commitments, ethical dilemmas, greenwashing, bases and supply chain, with an assigned tutor.
More in Defense, Military Engineering & Land Systems
All Defense, Military Engineering & Land Systems programmes → · How to apply · Fees & financing · Scholarships