Diploma in Electrical Grid Security under NATO Standards
600-hour online postgraduate diploma in electrical network safety for NATO facilities: power quality, EMC, earthing and lightning, electrical risk, redundancy, control system cybersecurity and accreditation.
Diploma in Electrical Grid Security under NATO Standards — studying from Ireland
Ireland is an established international hub for insurance, reinsurance and captive insurance, with Dublin hosting a large concentration of insurers, brokers and actuarial functions. The Central Bank of Ireland regulates insurance undertakings and the sector's solvency and conduct requirements. Engineers and analysts in this area work on risk modelling, catastrophe analysis, pricing and data-driven underwriting, often combining technical, statistical and regulatory expertise. Professional qualifications and standards are maintained by the Society of Actuaries in Ireland and related bodies.
Fees for Ireland: €1,490 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Which professional bodies in Ireland relate to this area, and is this qualification recognised by them?
In Ireland, actuarial work is associated with the Society of Actuaries in Ireland, and risk and data professionals may also look to bodies such as the Institute of Banking. SEIUM's qualifications are private and not accredited by any national body, so they do not confer membership or exemptions from these bodies. Confirm any exemption policies directly with the relevant institute before enrolling.
How is training like this typically viewed by employers in Ireland's insurance and risk sector?
Insurers and financial firms in Ireland generally value recognised professional qualifications most highly. A private online qualification is judged on its content and on your demonstrated skills, including your final project. Employers decide whether it is relevant to a given role, so it is best used to support existing experience rather than as a standalone credential.
What is the practical workload and language requirement for studying this online?
Programmes are taught entirely in English and delivered 100% online, so you can study from anywhere in Ireland or abroad. Workload depends on the programme length: specialist courses are 300 hours, postgraduate diplomas 800 hours and master's programmes 1,900 hours. Each student has an assigned technical tutor, and fees can be paid in instalments.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Interpret allied electrical supply requirements and their relationship with national low-voltage regulations.
Measure and assess the power quality and electromagnetic compatibility of the installation.
Design and verify the earthing, equipotential bonding and lightning protection system.
Apply measures to protect people from electrical and arc flash hazards.
Size the redundancy of the critical supply with UPS, generator sets and transfer switching.
Secure electrical control systems through segmentation, access control and anomaly detection.
Prepare the verification and security accreditation file for the installation.
Who it's for
- Electrical engineers designing or maintaining installations at bases, barracks and defence infrastructure.
- Maintenance managers at data, command and communications centres with critical power supplies.
- Electrical safety and prevention staff managing live work and isolation procedures.
- Substation protection and control engineers who must secure their systems.
- Accreditation, inspection and installation compliance staff.
- Electrical or industrial engineering graduates interested in defence infrastructure.
What you'll work with
- Royal Decree 842/2002 (REBT) (Spanish low-voltage electrical regulations)
- Royal Decree 614/2001 (protection of workers against electrical risk)
- IEC 61000-2-4 (compatibility levels in industrial plants)
- IEC 61000-4-30 (power quality measurement methods)
- MIL-STD-461G (electromagnetic emission and susceptibility requirements)
- IEC 62305 (protection against lightning)
- IEEE 1584 (arc flash incident energy calculations)
- IEC 62443 (security of industrial automation and control systems)
- IEC 61850 (communication networks and systems for substations)
8 modules
1.1Allied agreements on network characteristics1.2Specification of standard voltages and frequencies1.3Power supply requirements for deployable facilities1.4Infrastructure standards for common-funded facilities1.5Security investment programme and its requirements1.6Relationship with national low-voltage regulations1.7Documentation required for acceptance of works1.8Interoperability of connectors and sockets1.9Classification of loads by operational criticality1.10Managing documented regulatory deviations
2.1Harmonic distortion limits under IEC 61000-2-42.2Power quality measurement with a class A analyser2.3Voltage dips and their effect on sensitive loads2.4Flicker caused by fluctuating loads2.5MIL-STD-461 emission and immunity requirements2.6Electrical fast transient immunity testing2.7Common-mode and differential-mode filtering2.8Separating power and signal cable trays2.9Room shielding and required attenuation2.10Electromagnetic pulse and facility protection
3.1Earth grid design and soil resistivity3.2Measuring earth resistance3.3Permissible step and touch voltages3.4Equipotential bonding and main earthing terminal3.5External lightning protection system3.6Zoned surge protective devices3.7Cable shielding and screen continuity3.8Functional earth versus protective earth3.9Interference caused by earth loops3.10Periodic inspection of the earthing system
4.1Protection against direct and indirect contact4.2TT, TN and IT earthing systems4.3Residual current devices and their sensitivity4.4The five golden rules procedure4.5Lockout and tagout for isolation4.6Calculating arc flash incident energy4.7Selecting personal protective equipment4.8Safety distances and work zones4.9Staff qualification under Royal Decree 614/20014.10Emergency plan for electrocution
5.1Classification of facility availability levels5.2Redundancy configurations and dual paths5.3Sizing uninterruptible power supply systems5.4Battery autonomy and discharge testing5.5Generator sets and transfer time5.6Static and automatic transfer switches5.7Integrated power failure testing5.8Concurrent maintenance without service interruption5.9Calculating availability of the complete system5.10Continuity plan and contingency scenarios
6.1Segmenting the control network into zones6.2IEC 62443 requirements in power systems6.3IEC 61850 protocol and its security6.4Access control to protection relays6.5Event logging and time synchronisation6.6Firmware updates for field devices6.7Secure remote access for maintenance6.8Anomaly detection in industrial traffic6.9Incident response plan for a substation6.10Backups of protection settings
7.1Initial inspection and commissioning tests7.2Insulation and conductor continuity measurement7.3Protection trip testing and timings7.4Thermography and hot spot detection7.5Legalisation file for the installation7.6System security accreditation process7.7Conformity audit by an independent body7.8Pre-acceptance checklist7.9Recording results and issued certificates7.10Periodic revalidation of accreditation
8.1Survey the inventory of the existing installation8.2Classify loads by criticality8.3Measure power quality over one week8.4Verify the earthing system and its resistance8.5Calculate the arc flash study and protection8.6Design redundancy for the critical supply8.7Segment the control network and its access8.8Schedule the commissioning tests8.9Compile the accreditation file8.10Present the findings and corrective plan
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within each intake, so you can combine the programme with your job.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is ETAP, AutoCAD Electrical, Wireshark, Excel, in free, academic or evaluation versions. Cases are studied on real power analyser logs, earth resistance measurements, thermographic surveys and diagrams of substations and data centres. Assessment is continuous, module by module, plus the final integrated project.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- Prior technical training or professional experience in the sector. No university degree is required.
- An internet connection and a computer able to run the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 600 hours over 6–9 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with ETAP, AutoCAD Electrical, Wireshark and Excel, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute diploma, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
Prior technical training or professional experience in the sector (no university degree required), a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Diploma in Risk Engineering for Tunnels and Underground Works
600-hour online postgraduate diploma in risk engineering for tunnels: rock mass geotechnics, TBMs and NATM, settlement, groundwater, support, fire safety and contractual management of ground risk,…
Postgraduate Diploma in Management and Auditing of Insured Workshops
Online 800-hour Postgraduate Diploma in Management and Auditing of Insured Workshops. 8 modules covering Royal Decree 1457/1986 (vehicle repair workshops), ISO 9001 (quality management) and GT…
Diploma in Financial Risk Applied to Insurance
Online postgraduate diploma of 800 hours in financial risk applied to insurance. 8 modules covering financial risk applied to insurance from fundamentals to validation and implementation,…
More in Insurance, Risk & Actuarial Data
All Insurance, Risk & Actuarial Data programmes → · How to apply · Fees & financing · Scholarships