Course on Urban Heating and Cooling Networks
Online course of 300 hours in urban district heating and cooling networks: 6 modules covering UNE-EN 13941-1, UNE-EN 253 and the Spanish Regulation on Thermal Installations in Buildings (RITE) applied to real cases, with an assigned technical tutor.
Course on Urban Heating and Cooling Networks — studying from Ireland
Ireland's civil engineering sector is driven by public infrastructure investment in roads, water, housing and public transport, alongside rail projects such as Dublin's light rail and commuter rail upgrades. Transport Infrastructure Ireland sets standards for national roads, while Irish Rail and Iarnród Éireann operate and develop the rail network. Smart city initiatives in Dublin and other urban areas create demand for engineers working on sensors, data platforms and integrated mobility systems. Typical employers include contractors, consultancies, local authorities and public agencies, with Engineers Ireland providing professional recognition.
Fees for Ireland: €797 (Euro), with instalments and employer sponsorship available.
Relevant bodies in Ireland
Typical roles
Questions from Ireland
Is a SEIUM qualification recognised for chartered civil or rail engineering status in Ireland?
Chartered engineer status in Ireland is administered by Engineers Ireland, which sets its own criteria for membership and registration. Rail is regulated in part by the National Transport Authority and Irish Rail-related bodies, while building and infrastructure standards involve other authorities. SEIUM's qualifications are private and not accredited by any national body, so recognition is for those bodies and employers to decide.
Do Irish civil, rail and smart-city employers consider private online engineering study?
Irish infrastructure, consultancy and local authority employers usually weigh chartered status, project experience and relevant degrees heavily. A private online qualification may be considered as supporting evidence of skills, but its value is at each employer's discretion. We cannot promise any outcome, so discuss it with prospective employers.
Can I study alongside a site or office job, and is employer funding common?
The programme is online and taught in English, so you can study from home without travel or a student visa. Plan for 1,900 hours on a master's, 800 on a postgraduate diploma or 300 on a specialist course. Each student has an assigned technical tutor, fees can be paid in instalments, and employer sponsorship may be possible. Many Irish employers have continuing professional development budgets, so ask yours.
Take the controls.
Run a real engineering trade-off from this field. Move the sliders, watch the model react in real time and beat the challenge.
What you will be able to do
Explain the evolution and components of urban heating and cooling networks.
Select renewable and waste-heat energy sources for district networks.
Carry out the hydraulic and thermal sizing of an urban network.
Design user substations and thermal metering systems.
Plan the construction and optimised operation of the network.
Assess the economic and environmental feasibility of the system.
Develop the outline design of an urban heating and cooling network.
Who it's for
- District heating and cooling network engineers.
- Thermal installation designers moving into network-scale projects.
- Operations managers of urban networks.
- Municipal energy consultants assessing district heating schemes.
- Energy efficiency technicians.
- Managers at energy service companies (ESCOs).
- Engineering or science graduates looking to enter the thermal energy sector.
What you'll work with
- UNE-EN 13941-1 (design and installation of pre-insulated bonded pipe systems for district heating)
- UNE-EN 253 (pre-insulated bonded pipe systems for directly buried hot water networks)
- Royal Decree 1027/2007 (RITE) (Spanish Regulation on Thermal Installations in Buildings)
- Directive (EU) 2023/1791 (energy efficiency)
- UNE-EN 1434 (thermal energy meters)
- UNE-EN 15316-4-5 (energy performance of district heating and cooling systems)
- UNE-EN 489-1 (joint assemblies for pre-insulated pipe systems)
- Directive (EU) 2018/2001 (promotion of energy from renewable sources)
- TERMIS
- EnergyPRO
- Thermos
- QGIS
- TRNSYS
6 modules
1.1History and generations of heating networks1.2Fourth- and fifth-generation networks1.3Components: plant, network, substations1.4District cooling and urban air conditioning1.5Energy and environmental benefits1.6Overview in Spain and Europe1.7ADHAC network census1.8Linear heat density1.9Urban planning constraints on network routing1.10Case study: analysis of an existing heating network
2.1Biomass and centralised boilers2.2Waste heat from industry and data centres2.3Large-capacity heat pumps2.4Shallow and deep geothermal energy2.5Large-scale solar thermal2.6Cogeneration and energy recovery from waste2.7Free cooling and seawater2.8Seasonal thermal storage2.9Optimal combination of sources2.10Practical exercise: selection of sources for an urban network
3.1Demand estimation and diversity3.2Load duration curve and design capacity3.3Network routing and topology3.4Pipe sizing and pressure losses3.5Pre-insulated pipes according to UNE-EN 2533.6Heat losses and insulation3.7Supply and return temperatures3.8Pumping and differential pressures3.9Expansion, thermal movement and anchors3.10Lab: hydraulic sizing with network software
4.1Direct and indirect substations4.2Plate heat exchangers4.3Domestic hot water production in the substation4.4Thermal energy meters (UNE-EN 1434)4.5Regulation and control4.6Integration into existing buildings4.7Billing and tariffs4.8Quality of service to users4.9Substation maintenance4.10Workshop: diagram of a substation for a multi-family building
5.1Trench excavation and civil works5.2Welding and joint inspection5.3Leak detection and monitoring5.4Optimised operation and predictive control5.5Digital network management5.6Investment and operating costs5.7Municipal concession models5.8Grants and incentives5.9Analysis of avoided emissions5.10Case study: economic feasibility study of a network
6.1Definition of the urban area6.2Thermal demand study6.3Selection of energy sources6.4Network routing and sizing6.5Design of standard substations6.6Energy and emissions balance6.7Economic and tariff analysis6.8Phased implementation plan6.9Report and presentation6.10Final project: final review with the tutor
How you'll learn
100% online training on the SEIUM campus, with downloadable material, recorded classes and an assigned technical tutor. No fixed timetables: you progress at your own pace within the intake, making it compatible with work.
Each module combines theory, guided reading of the original standard and applied exercises. The working software is TERMIS, EnergyPRO, Thermos, QGIS and TRNSYS, in free, academic or evaluation versions. Real procedures are studied: hydraulic sizing of a district network, a feasibility study for a biomass heating network and the design of substations for existing buildings. Assessment is continuous by module plus the final integrating project.
Standards covered: UNE-EN 13941-1, UNE-EN 253, Royal Decree 1027/2007 (RITE), Directive (EU) 2023/1791, UNE-EN 1434, UNE-EN 15316-4-5, UNE-EN 489-1, Directive (EU) 2018/2001.
Build it end to end
Your final project follows the real engineering workflow, step by step, reviewed by your tutor.
Where this takes you
Requirements
- No prior qualification is required.
- Internet connection and a computer capable of running the programme software.
- English sufficient to read technical standards.
Ready to start?
Send your application today. Our admissions team replies within 72 hours with your study plan and funding options.
Frequently asked questions
The programme totals 300 hours over 3 months. You set your own pace within each intake, and your tutor helps you plan the workload around your job.
You work with TERMIS, EnergyPRO, Thermos, QGIS and TRNSYS, using free, academic or evaluation versions. Your tutor indicates the free alternative wherever one exists.
A SEIUM Institute certificate, awarded on passing the continuous assessment and the final project. It is SEIUM's own qualification, not an official state degree; its recognition depends on the programme completed and the regulations of each country.
Yes. Modules passed are recognised in a higher programme in the same area (postgraduate diploma or master's). Ask about the recognition policy when you enrol.
No prior qualification is required; you need a computer able to run the programme software and English sufficient to read technical standards.
Start dates are set by SEIUM's faculty for each intake. Our admissions team will confirm the next available date when you apply.
Related programmes
Course in Preventive Maintenance of Steel Bridges
Online course of 300 hours in preventive maintenance of steel bridges, structured in 6 modules covering deterioration, maintenance planning, corrosion protection, inspection and maintenance interventions, with…
Course in Gender and Urban Inclusion Policies
300 h online course in Gender and Urban Inclusion Policies. 6 modules covering Organic Law 3/2007 for the effective equality of women and men, the UN…
Course in Autonomous Cities and Digital Governance
Online 300-hour course in Autonomous Cities and Digital Governance. 6 modules covering Regulation (EU) 2024/1689 on Artificial Intelligence, Implementing Regulation (EU) 2021/664 on U-space and FIWARE.…
More in Civil, Rail & Smart Cities
All Civil, Rail & Smart Cities programmes → · How to apply · Fees & financing · Scholarships